Abstract Westerholm, I. (2011). Gravidas hälsovanor. Hälsopedagogiska programmet. Akademin för hälsa och arbetsliv, Högskolan i Gävle.This study aimed to investigate whether pregnant women change their health habits following recommendations and, if so, find out where they get this information from.

The purpose with this studie was to examine how individuals with experience of a long-term drugabuse describe their transformationprocess, and if this process has contributed to a change in their selfdescription. The studie was delimit to examine the transformationprocess, not in relation to what sort of abuse the informants had, or in relation to gender. The studie anwered questions concerning motivation to stop abusing, how the informants started the drugcareer, and how life as an abuser is described. In the studie qualitative method was used, five semi-structured interviewes were made with individuals who had a long-term addiction in the past. Symbolic Interactionism was the theoretical frame of referense that was used for analyse.

Background: Documents and legislation inform us that parts of the public health service of Sweden, at a political level, aim to support people?s sexual health. Statistics show there has been an increase among young woman, seeking help for sexual pain during intercourse. The diagnosis that the media has come to observe lately is vulvar vestibulitis. In general there is a lack of knowledge about the existence of this state of pain and its causes, which impacts woman to get appropriate help and support in time.

One must consider cost effectiveness when deciding how resources within the health sector should be distributed. Quality adjusted life years (QALYs) are used to measure the value of different medical treatments. QALY is based on utility maximization theory, which suggests that a QALY is always a QALY regardless of who receives it. Therefore, a produced QALY is worth the same regardless of the age or the initial health of the patient. Previous research has shown that these assumptions do not seem to fit the real preferences of individuals.

This paper aims at assessing the relationship between female and male part-time employment and the business cycle in Sweden during the years 1987?2005 using quarterly time-series data and two alternative indicators of the business cycle. It further aims at determining whether the share of women working part-time has changed over time. Key results include that the relationship between the business cycle and female part-time employment is found to be significant and countercyclical. No significant effect is however found for men.

AbstractThis report describes our ten week long thesis work which is the last task in our education in mechanical engineering at Linköpings University. The project has been performed at Siemens Industrial Turbomachinery AB?s service department. The company which is located in Finspång produces, sells and provides service for steam and gas turbines around the world.The purpose of this project is to help Siemens develop their maintenance programs for two of the auxiliary systems which are a part of the complete steam turbine system. These are lube and control oil systems.The project is restricted to two of Siemens maintenance products, No Stop Check (NSC) and the annual Safety Inspection (SI).

The background to the study is that within the next ten years about 50 new multi-purposeindoor arenas will be built. These are used for various events such as sports, concerts, etc. In order to achieve a high level of security in the case of danger alarm signals and alarmmessages must be heard well by the visitors. ÅF-Ingemansson wanted to show builders the importance of good speech perception and that it is not observed in arenas today. They conducted technical tests on two large multi purpose indoor arenas to develop parameters that affect speech perception in the arena.To get a subjective view of how these arenas are experienced a survey was created.

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..

This report describes a Bachelor thesis work in which a robotised laser welding cell has been modelled and simulated for the purpose of making a presentation movie. The report shows that the work has been concentrated on making the movie from the modelling phase through the recording of the movie and ending up with the editing of the final presentation movie. A pre-study was made prior the Bachelor thesis work. In the pre-study a literature study was conducted about measurement and calibration of a welding cell. Measurement of almost all equipment in the entire cell was also conducted in the pre-study.

Abstract   Cinematic time is the most complex of all: it is composed of public time (clock), personal time (experienced) and in addition, it can run backwards, be contingent, stored and (re)created. The present study examines some aspects of cinematic time, with special reference to the instant, the moment and the present. The strictly defined instant or moment does not exist. It is a passage between the past and the future and it is impossible to record on film or a photograph. One example is the moment of death, which is an abstraction with zero duration.

This paper investigates the compensation for risk in the context of the Swedish stock market with a special focus on downside risk. Using daily market data collected from the A-list of the Stockholm Stock Exchange between the years 1983 and 2005 the purpose is to answer the question whether Swedish investors are compensated for holding stocks with high downside risk, measured as downside beta. Using panel data analysis it is shown, in accordance with most previous evidence in international research, firstly that stocks with high beta values on average experience higher returns than stocks with low beta values, and secondly that stocks with high downside beta values experience higher returns than stocks with high beta values in general. On the other hand, cross-sectional regression methodology using a bivariate regression approach shows that downside beta does not explain excess returns very well. Instead, regression analysis suggest that high upside beta does a much better job in explaining excess return over this time period compared to downside beta.

The aim of the present study was to investigate response time variations in tasks for assessment of high level language functions and how response time is related to education, age and gender. Response time is defined as the time to complete a task after it has been presented. 103 subjects, aged 20 to 80 years, were tested with the Assessment of Subtle Language Disorders, Sentence analysis and Morphological completion. The subtest Comprehension of ambiguous sentences showed the longest response time and Morphological completion the shortest. Correlations were found between increasing age and longer response time for Comprehension of metaphors and between education and response time for several subtests.

This thesis is a part of the project "Sustainable harvesting and storage of sugar beets, more sugar to practice". The work has included a large part of practical experimental work with weight measurement, graduation and storage planning. The aim of the project is to be able to see whether the cultivars react differently in different storage conditions. The project has included storage under controlled conditions to give as accurate results as possible. To be able to mimic the farmers own preconditions the samples was harvested with a conventional Holmer.This project has two parts, one concerning the nature, time and temperature on storage where a number of different cultivars where investigated during three different recording times, two different temperatures and controlled in a controlled environment.

The main purpose in this degree thesis is to investigate changes in performance when introducing a newly produced Real-Time database in one of CC Systems products, the Diagnostic Runtime Engine, DRE. The thesis is a collaboration between CC Systems, creator of DRE, and Mimer AB, developer of the Real-Time database.The result reveals that the time spent on database access is considerably lesscompared to the originally used database. The research has lead to several additional requirements on the real-time database and these are presented as part of the result in this thesis. The additional features will help making the product more suitable for DRE and similar applications.Additional research is required to be able to recommend the use of this product or not. Primarily the performance in another operating system, Windows CE, but also the introduction of additional features should be investigated.

The student project Elba at KTH started in 2011 and is a project where a battery driven prototype car is developed. The vehicle competes in Eco Shell Marathon in Rotterdam, Holland. In this competition the vehicle that travels a certain distance including several starts and stops with the lowest energy consumption wins. To minimize the consumption is therefore very important, which requires knowledge of the vehicles energy losses.A vehicle's energy losses depends on several factors and can be divided into the powertrain efficiency and the driving resistance. The driving resistance can then be divided in to rolling and air resistance, if smaller losses like vibrations are ignored.