This is a paper about the effects from smoldering fire on lithic objects from an archaeological view. The introduction gives the background to this paper, a short orientation to forest wildfires and why the work is limited to: flint, quartz, quartzite and slate. Material and methods describes the stone materials and the setup that was used in the temperature logged tests with three replications for each type of material. The fuel in the burnings was peat on a bottom of sand. Flint showed a more drastic effect from heat compared with the other materials. Slate seems to have greater tendencies to change to darker colour and luster at lower temperatures than the other materials.

The classical age cities of Palenque and Tikal where ones great Mayan bastions with extraordinary architecture.  This architecture still fascinates modern archaeologies and historians alike. Still much of the architecture in the Mayan cities had the same style and function, but could diverse from town to town. This is the case of Palenque and Tikal. They share much of their buildings like temples, palaces and ball courts.

The government regulations for energy use in buildings will be tightened in the future. At the same time the interest in environmental classifications and certifications of buildings is increasing. This has meant a new situation for solar energy. The designs of solar heating systems are often based on experience and/or rules of thumb, rather than calculations and simulations. This thesis examines whether simulation tools, in this case Polysun, are useful in this work.

At Sandvik Materials Technology, Argon gas is used as furnace atmosphere when heattreating hot rolled wire. Upon heating chromium steel wire, a rich oxidelayer forms on the wire surface. The abstract of this masters thesis is to enhance the understanding of the constitution of the oxidelayers and the influence of the furnace atmosphere. This will be achieved by performing a number of annealing experiments on laboratory level. Also, the aim is to understand the chemical reactions and physical mecanisms controlling the pickling process.

This thesis examines a sample of Pitted Ware pottery from the Gotlandic site of Ajvide in regard to the spatial and temporal relationship of the shards. Ajvide Stone Age site have been extensively excavated over the past 25 years and the most recent analysis of pottery was carried out by Inger Österholm in 1987 and new analyses of the material are therefore greatly needed. Pottery from three sample areas was analysed in regard to their distribution, decoration, fragmentation, part of pot and quality of the goods. To analyse the material in a contextual way a multivariate statistical analysis called correspondence analysis was used. Two areas denominated ?dark areas?, which Österholm defined previously, as possible ritual sites, and one reference area with mixed material were chosen for the analysis.

The aim of this study was to examine young adult cannabis users? attitudes towards cannabis and their perception of the normalization of cannabis. The purpose was also to explore how their views of cannabis correspond with norms regarding cannabis. This study is based on interviews with five young adult cannabis users. The theoretical framework is based on Parker?s normalization thesis, Goffman?s notion of stigma, Becker?s definition of outsiders and the definition of social identity developed by Stone.

Many archaeologists have been intrigued by how often symbolic houses of varying forms are used on the burialgrounds of the Scandinavian Bronze Age. Some scholars even claim that to deal with the dead did not mean to set them apart from the world of the living during this period. Since several examples show that there seem to be an active connection between the ship-setting and different types of symbolic houses, this study seek to demonstrate and interpret how the ideology behind these symbols vary between three regionally different Swedish areas: Halland, Småland and Gotland. The purpose is to show that the way chosen to shape the symbols materially not only had fundamental impact on the organization of the burialground itself, but also on how the surrounding world came to comprenhend and use them. This study suggests that even though the special shapes of the graves and the gravefield itself can carry meaning, the materialization of the monuments can be interpreted as incorporated in a practice of remembrance in where the individual shaping of the grave most probably formed part of a greater story..

The purpose with this report is to illuminate the construction solutions and the deformations that could exist in medieval parish stone churches. But also to increase the writers understanding how activity forces effect the construction of the churches. With help from literature and a practical study, containing three churches the writers have collected the material that the conclusions and discussions are built upon in this report. The construction of the churches consists of three parts, the wall, the roof and the vault. The construction solutions are similar in the churches disregard of the roof, where the roof trusses are different.

The purpose of the research is to find out how the teacher of the pre-school looks at the value of the nature Pre-school. To get an understanding of what the nature pre-school enviorment can bring, we are talking about learning, knowledge, and experience combined with the everyday lessons learned from the natural world. The research is a stepping stone on the pre-school teacher?s thoughts and reflections of what a nature pre-school is. This is grounded in a view of how having options for alternative schools lead to wider research, and all conclusions where formed after multiple interviews and analysis.The results showed that the teachers involved are very positive to the nature pre-school environment and learning process.

In this final thesis a rough description of aluminium extrusion is made, the importance of temperature of both the raw material and the extruded profile for a good profile quality. The difficulty in controlling these temperatures are discussed and attempts to increase the control are described. The attempts are basically made by controlling the furnace that is heating the raw material. This is done in a manner that the raw material reaches its final temperature shortly before it is extruded. An IR-camera at the press can be used for profile temperature measurements.

This is a graduate work at the Swedish University of Agricultural Sciences, The Department of Urban and Rural Development, Ultuna. The purpose of this paper has been to find out and describe principles for designing parks that offers good recreational and aesthetical values and require little amount of carbon dioxide emissions during their maintenance. The purpose has also been to see if it's possible to use city wastewater in some extent to assure the plants water supply and to find other means to make it less necessary to use purified water for watering. Recently made studies as well as older ones show how important green areas are in dense city structures both from a health and a climate perspective. Trees and other plants adsorbs different forms of air pollution and can also lower the temperature in the surrounding area through their transpiration.

The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.

The building industry consumes approximately 40 % of the total energy consumption in Sweden, where the using stage is dominating with 80 %. There is a lot of work in progress to reduce energy use in the building industry, and the demands from authorities regarding energy use increases. As a part of this work Building and planning department of Sweden has established a requirement that has been applied since 2006, and restricts a maximum energy use for buildings.The requirement includes that an energy simulation must be done in advance to demonstrate that it is possible to meet the demands.Reality is however more complex than an energy simulation program, that frequently underestimates the energy use of buildings. The purpose of this thesisis to study and analyse deviations between estimated and actual energy use in modern apartment buildings. The study includes four apartment buildings in Stockholm, Gothenburg and Jönköping that were built in 2007-2009.

ästerbottens färgrika stenskatter - Spatiala presentationer och analyser av skifferfynd i Västerbottens län(The colorful stone treasures of Västerbotten ? Spatial presentations and analysis of slate artefacts in Västerbotten County)This essay pertains to the spatial distributions and analysis of slate artefacts in Västerbotten County, Sweden. The authors aim is to give answers the issues of what the distribution patterns of slate artefacts can tell us about the prehistoric humans in this area. By using GIS software and geospatial analysis the author strengthens the theories about separate interior and coastal economies, as well as the theory that the main share of production of slate artifacts are linked in the interior of the County, the author also refers to earlier research, both domestic and international. The theories of non-pragmatic preferences by the late Mesolithic and Neolithic people for red colored slate are also added to.

I have in my thesis, examined the possibilities in terms of energy for a condominium association.To have an effective and good energy is becoming increasingly important with today's rising electric and oil prices. In my thesis I have used the condominium association Kärralyckan, which is situated in Falkenberg. The buildings at Kärralyckan are built in the mid-1970s, and are heated by electric radiators. The tap water is heated by an electric boiler.Based on that calculation I can show the various energyststem. The different solutions have been developed by contact manufacturers and installers through phone calls and e-mail.According to the results shows that geothermal heating has been a great solution for Kärralyckan.