This thesis deals with the development of a specification regarding a push-button, which will be used to control the gear-shifting function in an automobile. In addition to this the author will describe different techniques and theories that have been helpful in achieving data and results for the specification.Kongsberg Automotive AB, is located in Mullsjö, Sweden, the company supplies parts to the automotive industry. In the research and development department, R&D, there is a group that works with development of Shift-By-Wire systems. In an automobile with a Shift-By-Wire system the communication between the gear-shifter and the gear-box occurs electronically. The mechanical link is, in most cases, taken away and replaced by the digital system.

This work consists of a survey and risk classification of eleven metal industries including foundries, finishers and engineering industries in two industrial areas in Mora. The study follows a method called MIFO (Method of Surveying Contaminated Sites) composed by the Swedish Environmental Protection Agency. In the method assessments of the degree of hazard posed by the pollutants, the level of pollution, the conditions of dispersal, sensitivity and the degree to which the area is worthy to protect are made for each contaminated site (object). The assessment classify the objects into four risk classes in which risk class 1 denotes a very large risk, 2 large risk, 3 moderate risk and risk class 4 little risk. The work of surveying using MIFO is divided into two phases.

Hårdgörning av trä syftar till att göra materialet hårdare. Detta går att åstadkomma genom komprimering, det komprimerade materialet tenderar dock att återgå mot sin ursprungsform då materialet utsätts för fukt om ingen låsning sker. Låsningen kan ske mekaniskt i en treskiktskonstruktion som motverkar träets fuktrörelser. Dessa skivor har dock visat sig vara instabila och tidigare försök har uppvisat deformationer i form av kupning. Denna undersökning syftar till att utreda förutsättningarna för att använda komprimerad asp samt att ta fram underlag för framtagning av en kommersiell produkt.Praktiska tester har genomförts för att studera hårdhet, återfjädring och densitet hos det komprimerade virket.

SCA Skog has taken the initiative to this Master?s thesis. Today SCA Skog has a great need to update their informtion on young forest stands across large areas. Traditional field inventory methods for updating stand databases are expensive and time consuming. However, the inventory could be made more efficient if stand boundaries and stand characteristics are derived from aerial photographs.

Low stumps represent on their own up to 80% of the dead wood remaining on clear cuts and therefore supply suitable habitat for saproxylic insects i.e. insects depending on dead wood for their survival. Recent stump harvesting activities threaten this substrate of ecological importance and increase the anthropogenic negative impacts on these species. Because of technical and environmental reasons (nutrient leakage, erosion) guidelines for stump harvesting recommend to retain stumps standing in wet parts of clear cuts. However, stumps in wet positions might not be a satisfactory substrate for saproxylic insects and therefore might not be as much used as stumps in dry positions.

People who invest capital in promising projects as a profession are called venture capitalists. They are constantly looking for new investment opportunities. Recently, media have observed a growing interest in forest land as capital investment. This is because several fund and investment company market the possibility of safe return through investment in woodland, both in Sweden and abroad. When an investment in forests is seen as an acceptable investment option, focus turns to nearby areas, namely agricultural land.

Stockholm has in recent years experienced a strong population increase but despite that fact, the demand for housing has not been followed by enough housing contracts. According to forecasts, growth in population will further be continued upward. With more condominiums than rental units on the market, new apartments are too expensive to live in. This creates unsustainable problems for those in lower classes of society. Creating a housing market in the periphery of Stockholm is not sustainable from a social perspective.

During the past years fire has been identified as an important factor for nature conservation in the forest landscape. To accurately quantify the size of a burnt area is obviously important, but also to quantify the degree of fire damage to the tree canopy. Such data are important for assessing the conservation value, and to support planning and management of the burned area in the future. I have examined how to estimate the status of tree crowns after fire from interpretation of aerial photographs. This is possible because fire changes the structure of tree crowns and this influences the colours in aerial photographs by spectral reflection. Included in the study are four areas, three of which burned in 2005 and one in 2006.

Allanblackia is a genus of trees that grows in the rainforests of West, Central and Eastern Africa. Its big fruits contain seeds very rich in oil which has been used by local communities for cooking and making soaps. The native stands are threatened by overexploitation and the demand for the oil is much greater than the supply. Domestication programs, aiming at introducing the trees to small holder agroforestry systems, have been started for some of the species. The main aim of this study was to investigate the soil requirements of Allanblackia stuhlmannii in terms of chemical and physical parameters, as revealed by the soil conditions in native stands. Another aim was to see if these varied along an altitudinal transect.

During pre-slaughter handling of pigs the animals are often subjected to methods that induces stress and are a threat to the wellbeing of the animals, such as mixing of groups, loud noise and transportation. A new law will be implemented in 2006 in Sweden that prohibits mechanical noise exceeding 65 dB in abattoirs. The purpose of the research presented in this paper was to examine the effects of noise and transportation on pig behaviour. The activity and aggressiveness of the pigs were examined with behavioural studies during transportation and during three different noise levels: 55, 75 and 95 dB. Before the noise treatments took place the groups were mixed and half of them were transported for approximately 2 hours. In the study 432 pigs were used.

The purpose of this study was to evaluate which apple cultivars are best suited for production of juice and cider. The study was limited to 41 cultivars. Common as well as uncommon apple cultivars were selected from available cultivars in the cold storage at Balsgård, Department of Horticultural Plant Breeding and Biotechnology, SLU.The practical part of the study consisted of the apples being pressed, and then the juice characteristics being assessed by appropriate criteria and methods of analysis. The analyses consisted of measurment of soluble sugars with a refractometer (Brix), titration of total acidity, determination of total phenolic content with a spectrophotometer, estimation of alcohol content by density meters and qualitative taste tests.The study did not account for different maturity of cultivars. Different apple cultivars were pressed on separate occasions, before and after Christmas 2010.

During the late 1800s fire suppression became increasingly effective in northern Sweden which led to decreased areas of fire-disturbed woodland and successive changes in the structure of forests. In the long run this can pose a serious threat to fire-dependent and fire-favored species. Today some fire-prone forest reserves are burned as a nature conservation act. Often partial cuttings are made before burning, with somewhat different motives. The purpose of the study in Långsidberget nature reserve was to give a general picture of forest history and its affect on today?s forest condition, and to show how partial cuttings affect burning conditions and results. Långsidberget is located close to areas that were colonized during the Middle Ages.

The plants in the genus Elatine are characteristic for oligo and mesotrophic lakes. This study focuses on Elatine hexandra one of the four species in Sweden. It is stated as vulnerable by the National Environment Agency and a conservation plan with guidelines to preserve the plant in Sweden is under preparation. There have been a few previous studies investigating this plant in other countries but this is the first one for Sweden. The aim of this study was to investigate the distribution, growth and reproduction of E.

The New National Elevation Model (NNH) is a new high-resolution digital elevation model (DEM) of Sweden from airborne laser scanning. It creates many new opportunities, particularly in the area of flood mapping. NNH is provided by Lantmäteriet in two formats, both in raw LIDAR (Light Detection and Ranging) data and in grid format with two meter resolution. These alternatives have advantages and disadvantages and the aim of this thesis research is to identify these. One of the focuses of the study is data storage and thus data structure analysis, resolution and storage facilities. The research questions are:Why and in what context the different NNH-products from the National Land Survey are used (DEM 2+ or point cloud)?What constraints and opportunities are created by the different options, mainly in terms of different software, resolution, and data storage?The study area is Kärsön in Ekerö municipality located in Stockholms län and has an approximate area of 25 square kilometers. The study is divided into two parts. The first objective is to identify the consequences of using different software to create DEM from pointcloud compared to the DEM2+ model. Height models with a two meter resolution are created in FME and ArcGIS. The models are then compared with the grid from Lantmäteriet, created in TerraScan. The second objective is to examine the impact of the change in resolution, both the storage aspect and both the accuracy aspect. Inverse Distance Weighted (IDW) is an interpolation method which in previous studies proved to have the best results on high resolution LIDAR data. This model was tested and compared with a model from FMEs built-in function and the model from Lantmäteriet wich are based on triangulation (also proved a good method in previous studies). The grid created in TerraScan has good properties such as accuracy.

Hylocomium splendens (Glittering wood-moss) is a common species in the Nordic countries and can be found in many different types of boreal forests. It usually forms dense moss carpets on the forest floor. The shoots grow in segments and new segments form annually on the previous years growth. The size of the segments is probably regulated in a high extent by local micro environmental conditions. Previous experiments suggest increased growth of H.