The effects of the deregulation of the electricity market 1996 in Sweden on short-term hydropower regulation are unknown. This report investigates patterns in subdaily regulation in the Ångerman River Basin during the period 1993-2011. Differences in subdaily flows and zero flow events between the periods 1993-1995 and 1996-2011 were studied by analyzing hourly data from 8 regulated and 8 unregulated locations with four subdaily flow variation indices. No correlations between the market deregulation and the regulation intensity in the Ångerman River basin were detected. The number of days natural ranges of variability were exceeded and the magnitude of subdaily variation were significantly higher at regulated locations.

This master thesis was carried out at ELFA, one of the largest catalogue distributors of electronics in northern Europe. ELFA offers a wide selection of products such as measuring instruments, fuses and screwdrivers. The master thesis handles the possibilities of an increase in the internal flow of products. The background to this problem is ELFA?s acquisition of two new companies, which brought the product range in the warehouse from 55 000 to 80 000 products.

The purpose of this study was to examine whether an inventory of the vegetation overgrowth could be used to indicate a locally nutritional impact. The study was conducted at Märstaån where the water runs through a number of agricultural lands that could lead to an increased amount of diffuse emissions of nutrients. The vegetation overgrowth in the water was also studied in relation to shade, meandering and water flow effects on the vegetation. With this method, no definitive conclusions could be drawn.Where the water was shaded, no vegetation overgrowth could be found. Therefor trees should be planted to prevent any future overgrowths.

I denna studie är syftet att belysa vilka effekter som underhållningsspel kan ha på motivation och koncentration samt även undersöka om spel kan användas för att förbättra den kognitiva prestationen. Konkret ställs frågan vilka förändringar som sker i reaktion, korttidsminne och perception efter att ha spelat Gradius 3 samt vilka orsaker som ligger bakom dessa förändringar. Resultatet pekar entydigt mot att spelandet har en positiv effekt och förbättrar den kognitiva förmågan. Särskilt när det går bra i spelet och man får ett flow kan prestationen maximeras, vilket överensstämmer med Csíkszentmihályis flowteori. Det flow som uppstår i spelet ger en euforisk känsla av tillfredsställelse som stimulerar motivation och koncentration, vilka båda är förutsättningar för bättre prestation.

To invent an optimized product is a complicated process. This process is only half of the work. It is equally important to develop a production system that can produce the product in an  efficient and ergonomic way.After several evaluations of conceptual and detailed drawings a final idea has come to light.The idea intends, to the maximum extent, utilize the facility in a more efficient way through moving assembly lines and stations closer to the flock section and the stock for complete products. To make the production better, stations are placed in more logical places given the assignment they are supposed to accomplish. This improves the material flow radically.

This thesis is a feasibility study into how Fresenius Kabi may rationalize their destruction process in regards to cost, recycling, and work environment. The two main objectives are to identify scrap flows and the possibility to improve or replace the equipment that is now carrying out the physical scrapping. The flow has been visualized by a flow chart of the material and communication. A chart of the problem established to visualize where improvements are necessary. Based on the problems proposals are presented on how to improve the flow thru the plant.During analyze of the physical scrapping equipment it was also necessary to take a deeper look at how they are carrying out there work today, how does the procedure look like, working environment and where are the weaknesses.

As stocks have become a more common way for people to save their money, the range of financial information has had a substantial increase. To understand the assumptions that stock valuation and analysis are built upon, it is important for the reader to have an understanding for the models that are used by banks and institutions when recommendations are published.The cash flow model, which is the most commonly used stock valuation tool, is based on CAPM. This model describes the relationship between an assets return and its risk in relation to an index. The risk parameter is called the beta value and has grown to be the dominating risk factor within financial economics literature.The use of beta values has been widely discussed in the world of academics and some researchers claim that the degree of explanation brought about by the beta is so low that it should be discarded, others are faithful to the beta and believe that it still serves a purpose. As a result of this criticism other ways to calculate the beta have surfaced, models that take other factors of risk into consideration.

This paper investigates the relation between stock performance and owner share retention in Swedish public equity listings during 2009 to 2013. The listings during the period are studied and divided into binary groups of "exits" and "non-exits", which are used in a statistical regression model to determine if there is a significant difference in average stock performance. The study finds that stocks of exit-companies on average significantly underperformed stocks of non-exit-companies during 2009 to 2013. Nevertheless, due to the limited number of observations available and the unusual market conditions, caution is required in interpreting these results..

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

Title: Bottleneck management through materials administration Course:  4FE05EAuthors:  Mikael Karlsson and Johannes Mueller  Examiner: Helena ForslundKey words:  Bottleneck management, material management, process description, timber, proceduresPurpose:   The objective of this study is divided into three parts, all three parts of the purpose aim for the same goal. Namely, to improve the material management so that this enables the bottleneck in the planing mill to keep a continuous  flow, and thereby minimizing the risk for production stops at LB-Hus.  Part.  1:  Identify  and  analyze the material management  connected to  the planing mill  in order to identify problem areas.Part.2:  Identify  improvement potential  in the material management connected to the planing mill.  Part.3: Suggest improvements in the material management connected to the planing mill. Theoretical framework: Process mapping, inventory accounting, balance safety, inventory availability / service levels, safety stock and reorder point, forecasting and routine descriptions.Empirical foundation:  Interviews carried out at LB-House,  illustrated with the help of process maps and a description of each process.  Conclusions:  To work with  the  suggestions  given  and  to  follow  clear procedures  in  all  processes would  result in  a more  efficient  inventory management,  it would also present  a  solution  to  the problem regarding the planing mill being a bottle neck.Suggestions for further research: Review and map the information flow from demand to production start.

Question:"Does the market possess perfect information as the efficient market hypothesis says?""Is there any significant relationship between the abnormal stock return on the ex ? day and the dividend?" Purpose: The purpose of this study is to enlighten and find understanding about stock return versus dividend on the ex ? day and try to figure out if abnormal returns occur on the portfolio during dividends.Methodology:The study was based in a quantitative nature and was derived with an event study and a hypothesis testing. The authors investigated the thirty most traded shares on the Stockholm stock exchange during a period of five years (2005 ? 2009). They were analyzed during a total of nine days; the estimation window was set to sixty days.

Our essay treats the use of the annual report when it comes to marketing. Today there are many different ways for companies to reach out with their different messages; the thing that caught our interest was if the annual report is such a way.The annual report is an external accounting report which task is to give information to interested parties of companies. The annual report can be used to examine if the company has followed and achieved their goals. In other words it?s an important source of information that can be found about a company, which different interested parties can take part of for analyze.

Increased competition in the IT industry has sparked a need for developing faster innovation processes with more predictable output. One of the biggest issues when it comes to achieving a faster flow through the innovation process lies in managing its high degree of variation. Proposing a solution to this problem, Lean Software Development (LSD), was developed to provide a framework for how IT companies should organize its software development process to achieve increased speed and quality. This study examines to which extent LSD, as a set of values, principles, methods and tools, can be used to improve flow efficiency in the innovation process. A case study of a multinational IT company was made by conducting ten semi-structured interviews with current employees.

AbstractEmbla 5 is an office building which has done a large improvement. The clients of this building has made an order of WSP and the student Anders Kempe to calculate the use of energy for the building, and after that result proposing further measures which can decrease the energy use of Embla 5.The ground for this report is when calculation of the present energy use of the building is stated. To make that information of a number of parameters such as envelope, the heating system and ventilation has been located and set in to the simulation program IDA ICE which calculate the energy use.To improve the energy use further this project has been concentrated to change the system of ventilation. Today the ventilation system is of the kind CAV (constant air volume) and the air flow is dimensioned for after recommendations from BBR and Arbetsmiljöverket in the office spaces. Consider that Embla 5  is an office building where the people only staying for 8-10 hours/day so was the ide to see how much energy saving if the air flow is reduced the time people not being in the building.

The content of the following report is the summarized result of three students thesis at Blekinge Institute of Technology in co-operation with Water Jet Sweden AB. This report will give the reader a description of principles how to measure the abrasive mass flow in a waterjet cutting system. The work began with a visit to Water Jet Sweden AB to get a closer look at the problem. When the analysis of the problem was done the criteria were defined in the form of demands and desires. The main task of the criteria was to guide the search for the solution.