The building industry consumes approximately 40 % of the total energy consumption in Sweden, where the using stage is dominating with 80 %. There is a lot of work in progress to reduce energy use in the building industry, and the demands from authorities regarding energy use increases. As a part of this work Building and planning department of Sweden has established a requirement that has been applied since 2006, and restricts a maximum energy use for buildings.The requirement includes that an energy simulation must be done in advance to demonstrate that it is possible to meet the demands.Reality is however more complex than an energy simulation program, that frequently underestimates the energy use of buildings. The purpose of this thesisis to study and analyse deviations between estimated and actual energy use in modern apartment buildings. The study includes four apartment buildings in Stockholm, Gothenburg and Jönköping that were built in 2007-2009.

The purpose of this study is to achieve an understanding of how a CE- marking process is conducted and to identify the relevant factors that must be considered in such a process. We have conducted our study at Lo?vhults Svets & Smide AB (Lo?vhults) in Skruv, Sma?land Sweden, which are manufacturing brackets for small covering constructions.To understand how a CE-marking process is conducted several documents and provisions have been reviewed to achieve a basic understanding and insight of the subject. It thus led to that guideline ETAG 015 were studied and the factors to be considered in the CE-marking of brackets were identified. Together with Jan-A?ke Johansson at Lo?vhults we agreed on four different brackets to investigate for a potential CE-marking.

It has become fairly common for a company to outsource one or several of its logistic activities to a party separate from the business of the company itself. Since the original agreement usually involves two parties, the seller and the buyer, the logistics company is called the third party. The relationship between the outsourcing company and the third party varies in form and in depth but can sometimes be very close, almost to be considered a joint venture. When the co-operation between the two parties includes more than just one separate logistic service and the third party adapts its business to a certain extent to his principals needs, it constitutes third party logistics. If the logistics company, or a party employed by it, becomes insolvent when having the entrusted goods in his possession questions may arise concerning the right to the property.

TitleEnergy-efficiency ? of slab blocks built in the sixtiesAuthorsRichard Sandahl and Kim SöderbergEducationHalmstad University, Section for economy and technique Construction Engineering 180 ECTSSupervisorMargaretha Borgström, Universitylector construction physics, Halmstad UniversityContact person at HFABUlf Johansson Heating, sanitation and energy co-ordinatorReportExamination paper at the construction engineering program is performed in cooperation with HFAB (Halmstad real estate concern Inc.)AimThis examinations work is done in cooperation with HFAB and there project on the block around the street Maratonvägen. HFAB:s dwelling stock on this area are going through a bigger renovation and in relation to this they are looking on the possibilities to make this building more energy efficient. That is why this examination paper has as purpose to answer the question if it is possible to make slab blocks built in the sixties more energy efficient. This is done by calculate energy efficient measures on a chosen apartment block at Maratonvägen in Halmstad, in an energy and expense perspective.MethodThe examination paper is based on different methods, mainly calculation but also qualitative conversation studies, economic calculations and literature studies.

Sahlgrenska Academyat University of GothenburgDepartment of Internal Medicine and Clinical NutritionAbstractTitle: Whole fat versus low-fat dairy products for primary prevention of cardiovascular disease. A systematic review.Author: Josefine Lindqvist, Robin Järnmark, Mathilde OhlinSupervisor: Mette AxelsenExaminer: Anna WinkvistProgramme: Dietician study programme, 180/240 ECTSType of paper: Examination paper, 15 hpDate: 2014-04-09BackgroundResearch indicates that dairy products seems to have a protective impact on the incidence of cardiovascular disease regardless fat content. Paradoxically the Nordic nutrition recommendations recommend an exchange of full fat dairy product to low-fat dairy products.ObjectiveThe aim of this review is to investigate whether the variation in fat content of dairy products have any bearing on the onset of cardiovascular disease. With regard to common risk markers for cardiovascular disease the outcome measures hypertension, hyperlipidemia and weight gain is examined.Search strategyThe searches were made in the databases Medline (23/1-14) and Scopus (6/2-14).Selection criteriaRestrictions: Human Studies, Adults, Randomized Controlled Trials, English.Data collection and analysisTwo RCTs were included. Validation of the separate studies was performed with SBU's review template for individual studies and GRADE was used for summarizing the evidence of outcome measuresMain resultsThe two included studies examined the outcome measures blood pressure, weight and blood lipids.

A study to optimize insulation thickness for stock-, industrial- and office-buildings for external walls and roof in an economical perspective has been conducted on behalf of DynaMate. DynaMate?s role is to maintain all Scania?s buildings. Analysis has also included other parts of the building envelope, such as windows, exterior doors and industrial doors. In this thesis, three different types of exterior wall constructions has been investigated, these are a sandwich design consisting of sheet metal and a another one consisting of concrete, as well as a wall of concrete with a coating of plasters.

The forest industry is one of the most important industry branches in Sweden. Since the demand of high precision wood deliveries has increased, the demand on a well constructed forest road net also has increased. A good road net gives the wood-supplier competition advantages and also increases its service level towards its customers, lumber-mills and pulp-mills. In some parts of Norrbotten, the road net is still insufficient and not yet built out enough, and that is why it is important to know how to act and where to improve the road net in these areas. The purpose of this thesis was to create a work-model for long term road planning in areas with no road net or a not yet complete road net. The model has been created in an ArcGis environment, where a long chain of tools has been tied together with the program ?Model builder?.

This study investigates three different methods for evaluating MOE,Modulus of Elasticity, in field measurements. The purpose is toinvestigate the possibility to use dynamic measurement methods infield measurements that hitherto (2010) has been performed with staticmethods. The objects of investigation are 20 glulam beams. The firstfield measurement took place in november 2007 and applied a staticmethod based on the standard SS-EN 408. The second measurement,described in this study, took place during summer 2010, and appliedstatic as well as dynamic methods.The MOE of wood is affected by a range different factors.

Extensive planting of the tree species lodgepole pine (Pinus contorta var. latifolia) during the 1970s and 80s has resulted in large areas now being available for commercial thinning. However, the varying quality of the stands creates a problem. The purpose of this study was to investigate, at the Torsby district of the Stora Enso forest company, how well the present computer records of the stands correspond to reality and determine which stands are, from a qualitative perspective, suited for timber production. Finding variables that indicate better stands would give Stora Enso the possibility of selecting qualitative stands which are more profitable to thin. The study included 32 stands containing at least 70 % Pinus contorta.

Tillverkning mot kundorder kräver oftast att hålla ett förrådslager med råmaterial. Ökade kundkrav på korta leveranstider kräver att material skall finnas tillgängligt i lager. Detta ger upphov till ökade lager hos ett företag som i sin tur gör att de binder mer kapital och samtidigt leder till en sämre av­kastning. För att undvika att hålla för stora förrådslager men samtidigt hålla en god servicenivå krävs en effektiv lagerstyrning.Syftet med detta projekt är att ta reda på hur efterfrågan ser ut hos företaget i dagsläget samt kunna ta fram en lämplig prognosmetod och beräkningsmodell mot en viss takt för lagerstyrningen. Prognos­metoderna skall vara ett underlag för inköp vid beställning av material.

Previously studies have shown that the way companies explain outcome in their annual report is not totally trustworthy. Studies show that the management has a self serving bias when they explain the result to give a positive image of the company. Our study is based on investigations into this phenomenon in the telecom market in Sweden. Turbulent market conditions with, among other, deregulation of the monopoly of fixed telephony and a huge technical evolution, which has led to an increase in competition, is the reason to why we have chosen to study the telecom market in Sweden. As a benchmark in our study the attribution theory will be used.

In modern, Swedish political science there are different ways of looking at ?democracy?. A very common distinction is that between three groups of democratic theories: electoral democracy, participation democracy and deliberative democracy.The nowadays frequently used concept of electoral democracy is often used as synonymous with the older concept of repre­­­­sen­tative or indirect democracy ? frequently regarded as a contrast to the direct democracy of ancient Athens. However, there are also important differences.

Stockholm is one of the fastest growing cities in the world. Its population is growing every day and the housing needs are becoming higher. Despite the growth and the need for more houses only a few new housing units are being built every year. Critics argue that if the building rate stays as it is today the development of the city will be very limited since there is no capacity for the city to embrace new incomers.The decision makers in the municipality of Stockholm are planning for large investments in housing units for the coming years up until 2030. There are plans of building approximately 140 000 new apartments to mend the ascending need for new houses.Farsta County is part of Stockholm and lies a few kilometers to the south of the city center.

Background and Problem discussion: Strategic evaluations are important as they providecrucial information regarding Swedish development assistance and recommendations on howto face problems and inadequacies found in the evaluations. Therefore, the follow up ofrecommendations is of great significance as well. Unfortunately, SIDA?s ManagementResponse system for follow-up of strategic evaluations has not been functioning in asatisfying way and needed actions have not been taken. Thus, Swedish developmentassistance has been criticised for the lack of implemented actions and the public has startedto question the work carried through by the organisations.

Social medias impact recent years has been huge and an increasing number of companies have started using the services. The benefits for companies to be available thru social media are many and the costs are low. Social media makes it easier for companies to get in touch with their customers and at the same time they reach out to a lot of people since the number of frequent user?s constantly increase. A major part of the information that is available is seen from a company?s perspective and what benefits they can take advantage of thru social media.