The purpose of this master?s thesis is to contribute to the development of business relationships between a supplier and its customers. The research area and research problem was further developed into three research questions. The research questions concerns the following subjects: the substance of business relationships and dimensions within relationships management that can be used in order to contribute to the development of a company?s business relationships.

Since July 2005 the major companies listed on the Swedish stock exchanges are required to apply the Swedish Code of Corporate Governance. The code states that companies shall have a nomination committee responsible for nominating new board candidates and seek to obtain gender equality in the Board of Directors. This paper examines the trend of board as well as nomination committee composition among Sweden's 60 largest publicly traded companies between 2005 and 2008. Our overall finding is that neither the board nor the nomination committee composition has changed to a notable extent during the period and that the share of newly appointed female board members has actually decreased. However, the trends vary between different sectors.

Ear piercing performed in hairdressing salons and jewellery shops using a piercing gun has been set aside from the obligation to notify the local environmental and public health authorities, due to the use of disposable cassette with the piercing gun. According to the Swedish environmental code each practitioner are required to prevent any health hazards arisen from the operation. Local bacterial infection is the most frequent complication associated with the ear piercing procedure and to prevent the potential risk of such an event, hygiene conditions in both the premises and in procedures are essential. The purpose of the report was to examine the presence of ear piercing practitioners in Umeå and their current hygiene conditions. The study consisted of interviews with employees and managers on site whose answers was evaluated and compared to the general recommendations of The National Board of Health and Welfare.

Abstract The development towards an international accounting standard implies that Swedish groups of companies that are not quoted on the stock exchange can use a parent company perspective or an entity perspective while making their group accounting. The purpose of this study is to describe and explain the motives behind the groups of companies choice of perspective and to show how these motives agrees with the effect it has on the profit and loss account and on the balance sheet.The study includes four fictitious groups of companies based on real groups of companies. Every group of companies includes 1-3 subsidiary companies, where at least one is owned by the parent company with 51-70 %. Some assumptions were made before the consolidation.Relevant key numbers have been calculated according to both perspectives and then compared. A total of three semi structured interviews have been carried out two with representatives for the real groups of companies and one with a chartered accountant.

Obesity and overweight are today classified as one of the largest epidemics in the Western world and is threaten a large part of the population. As a reaction to this a major health trend has emerged in recent decades. Every day consumers are exposed to information from the media about what is healthy or unhealthy to eat and the recommendations change frequently.There is great interest in healthy food on the Swedish food market, but still healthy foods only represents a small proportion of the total food sales. The essay examines the gap between the current and potential demand for healthy food and if it can be explained by any of the following factors: lack of information, price, taste or cognitive behavioral.To study these questions a quantitative method have been used and 213 questionnaires were collected. The intention is to draw general conclusions about the entire population.

This paper is the result of a case study conducted at Uppåkra Mekaniska AB during the spring of 2006. The task that was presented by Uppåkra was to develop a basis for a decision for the planning activities at the company, so that in the future they can create lot-sizes which are based upon a total cost perspective. Total cost in regards to lot-sizing is defined as the sum of the administrative reordering costs and warehousing cost per stock keeping unit.To collect data a series of interviews and observations were conducted. This data was then used during the lot-sizing simulation and analysis. The 15 units that the simulation was conducted on were grouped into three item classes depending how many different machine setups they required during the production process.

AbstractThe research in the interdisciplinary field of natural-human-health-design has in recent decades gainedmomentum and led to new or new-old ways of thinking and acting in terms of planning and design of outdoorenvironments with the aim of health promotion. Concrete concept models and design guides have begun toemerge as a result of this research.The purpose of this work is to use these guides to develop a design proposal for a supposed health garden,with Wij Trädgårdar in Ockelbo as a base. This has been done in the form of a process description. The targetgroup for the design proposal is long-term unemployed and people who have come to Sweden as refugees.Since the specific design recommendations could not be found for the selected target group, the main materialwas general guidelines for health gardens in combination with guidelines for health gardens directed to targetgroups with stress-related problems, which is a broad target group for which there are relatively much currentresearch.The result is a process description of the progression towards a sketch on a health garden, designed for aspecific spot on Wij Trädgårdar, but available for use in other locations, provided adjustments is made to thespecific location. The sketch is supplemented with plant suggestions to different parts of the garden.

The purpose of this thesis was to investigate whether accounting quality is a priced factor by investors. The event studied is the release of year-end result and the release of the annual report. To assess accounting quality a sample of 30 companies listed on the Stockholm Stock Exchange during 2003 to 2007 are studied. We assess accounting quality by the absolute size of discretionary accruals using the modified Jones model developed by Dechow et al. (1995).

Pastern dermatitis is a common condition among horses. It is a symptom, a reaction in the skin of the pastern rather than a diagnose. There are a lot of homemade treatments when you ask horse owners how they handle pastern dermatitis, but what does the science say about how it should be treated? Today there is a growing problem with antibiotic resistance, but how good are the veterinarians on testing for resistance before they describe antibiotics? Bacteria and fungus is seldom the primary cause for pastern dermatitis, the reaction is often secondary to environmental factors. It?s difficult to diagnose the primary factor and it´s even more difficult when the horse has been treated in different ways before the veterinarian gets involved.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

As energy prices skyrocket and the environmental issues become more frequently debated, interest in energy-efficient buildings has increased sharply in the past decade. Because of this, the interest to achieve high air tightness in building envelopes have once again awakened, due to a good air tightness contributes to lower energy consumption in several ways and to a healthier indoor environment.As the regulations for energy consumption and controls of achieved air tightness has tightened considerably in recent years, the work regarding sheets for air tightness changed significantly for construction contractors. This thesis includes a study that aims to detect what kind of manuals, recommendations or instructions contractors working according, and how a number of randomly selected construction companies in Halland, Sweden, are dealing with the matter of high air tightness of the building envelopes. The study also includes a knowledge inventory of supervisors, site managers and skilled workers, and what their opinions and attitudes are like towards work regarding the sheets of air tightness. The results have been compared with a similar survey dated to 2004, conducted by the SP Technical Research Institute of Sweden in collaboration with Chalmers University of Technology.

If Sweden want to be able to compete internationally with its production capacity,it is important to work actively with production development and production ofresource-and time-efficient. This report is a bachelor thesis of 15 hp conducted atthe University of Halmstad. Using the principles of continuous improvement andLean Production, the author developed a concept for HAGS Aneby AB to changeto the customer order driven assembly of spring toys.First of all, the theories of Lean Production, logistics and ergonomics are used tobuild and present a theoretical framework for further examination. Then, toachieve the target, the current assembly process is analyzed to develop some firstconceptual ideas for improvement. In order to develop the best advice, theconcepts are evaluated against the company?s requirementsThe developed action plan gives recommendations on how the company shouldrestructure their assembly process and the organization of the related departmentin order to produce spring toys in a more time efficient and lean way.

Swedish family companies are facing a tremendous change in the form of generation changes because of the large part of owners that are about to retire. If all 45 000 to 50 000 family companies ceases to exist, Sweden looses a significant part of business trade.There are numbers of different methods for an older generation of owners to transfer their companies to a younger generation such as inheritance, gift, will, internal stock transfer, division?s etc., where inheritance is the most complex area. That an owner of a company dies without any plan for the future of the company is not preferable because the rules of legal successions occur. The law system regarding inheritance is usually not a good method since the surviving wife, who has the primary right to the inheritance, may not be interested in the company.

The work examines geographical variations of bicycle use in Trondheim municipality with the aim to create an understanding of what influences the use of bicycles and explain the geographical travel pattern for cycling. The work focuses on the how physical structures generates different transports effects. Where bicycle travels in Trondheim municipality are undertaken is described by using network analysis in ArcGIS, based on aggregated data from the travel habit survey (RVU) in 2009/2010. Trondheim municipality is divided into smaller geographical units (zoner) whose characteristics are described by 19 variables, categorized into 6 groups; Distance, Land use, Topography, Bicycle Facilities, Road characteristics and Demographic factors.By linear regression analysis in SPSS and ArcGIS Spatial Analyst, an explanatory model is elaborated. The variablesdistance to the regional center, workplace density, percentage separate bike paths and hilly terrain explains 78 percent of where cycle journeys are undertaken.

Foot rot is a severe claw disease which occurs among sheep and goats in most parts of the world, with outbreaks in hot and humid weather. It is a contagious bacterial infection caused by Dichelobacter nodosus in association with Fusobacterium necrophorum. Foot rot has a negative impact on both animal welfare and economy.This thesis presents how Australia, Nepal, Norway, Switzerland, Great Britain, Sweden and Uruguay handle foot rot. In the selection of countries the focus was on countries that have control- or eradication programs against foot rot. There are differences in the climate, animal husbandry practices, animal welfare and economic resources in the countries that are presented.