Sök:

Sökresultat:

11831 Uppsatser om Stereoseende Sensor data fusion - Sida 20 av 789

Förtolkat digitalt data till skogsägarplan

The purpose of this study is to investigate how to use remote sensing data when making a forest management plan. The main focus of the study is to compare different methods to identify forest stands of a forest property, and by manual measures and estimates try to evaluate the quality of interpreting data. This report is based on survey questions sent to five different organizations working with remote sensing data. Only two of these where willing to participate in this investigation. The organizations where asked to analyze the same forest property and divide into compartments and make estimations of volume, basal area etc. in every stand.

Tillämpning av ett medium : kvalitativ pilotstudie av två generationers användning av iPad

This study aims to investigate and describe the direction of the ideological development of the Swedish gymnastics association Gymniska Förbundet. Between 1928 and 1932, this organization transformed from a purely gymnastic and cultural association into an influential platform for the production of Swedish nationalist ideology. Based on theories of National Socialism?s formation within modern society, the analysis focus on the conditions regulating Gymniska Förbundets relation to modernity. Thus the study examines the association?s ideas in relationship to the concept of modernity.

Utformning av mjukvarusensorer för avloppsvatten med multivariata analysmetoder

Varje studie av en verklig process eller ett verkligt system är baserat på mätdata. Förr var den tillgängliga datamängden vid undersökningar ytterst begränsad, men med dagens teknik är mätdata betydligt mer lättillgängligt. Från att tidigare enbart haft få och ofta osammanhängande mätningar för någon enstaka variabel, till att ha många och så gott som kontinuerliga mätningar på ett större antal variabler. Detta förändrar möjligheterna att förstå och beskriva processer avsevärt.Multivariat analys används ofta när stora datamängder med många variabler utvärderas. I det här projektet har de multivariata analysmetoderna PCA (principalkomponentanalys) och PLS (partial least squares projection to latent structures) använts på data över avloppsvatten insamlat på Hammarby Sjöstadsverk.På reningsverken ställs idag allt hårdare krav från samhället för att de ska minska sin miljöpåverkan.

AUTOMATISK PAN/TILT-KONTROLLER FÖR ANTENNINRIKTNING

This report describes the design and construction of a prototype that automatically aims a microwave link towards a target. The link, that is located on a mobile aerial mast, is used by Saab Training Systems as a part of an infrastructure network. The report also discusses the development of a GUI that communicates with the control unit by Bluetooth.The control unit, called Pan/Tilt-controller, controls the position of the link by stepping motors. One motor controls the azimuth angle and the other one controls the elevation angle.By a GUI the operator enters the coordinates on its own position and the targets position. Hereafter a bearing is calculated and it will be sent up to the control unit.The control unit will sense its own direction by a magnetic sensor that works as an electronic compass.

Comparison of two methods for evolving recurrent artificial neural networks for

n this dissertation a comparison of two evolutionary methods for evolving ANNs for robot control is made. The methods compared are SANE with enforced sub-population and delta-coding, and marker-based encoding. In an attempt to speed up evolution, marker-based encoding is extended with delta-coding. The task selected for comparison is the hunter-prey task. This task requires the robot controller to posess some form of memory as the prey can move out of sensor range.

Analys av mätdata från nätstationer

Fortum has in a pilot project installed metering equipment with wireless communication in secondary substations in Stockholm. So far, the collected data are used only in specific projects.This master thesis was carried out at Fortum Distribution AB in Stockholm during 2013. The purpose of this study is to simplify and enhance the use of data in for example network planning process, by giving suggestions on how data can be managed and giving examples of analyzes that collected data can be used for.The electricity meter which Fortum has installed is a EDMI-Mk10A which is set to measure max/average/min values with a one hour time resolution of the following parameters: voltage (per phase), current (per phase) andactive power and active and reactive energy.In order to analyze the collected data an analysis tool is required. During this thesis two customized tools in Microsoft Excel have been developed, one for sorting data and one for analyzing.One aim of the thesis is to show examples of what collected measurement data can be used for. This work shows an example of analysis of active power, power factor, voltage, occurrence of interrupts and the relationship between outdoor temperature and power.This master thesis has among others resulted in the following advice: Expand the number of secondary substations with measuring equipment.

Släktnamn i Sollefteå : En studie av tillnamnsbruket i Sollefteå församling 1700-1820.

This study aims to investigate and describe the direction of the ideological development of the Swedish gymnastics association Gymniska Förbundet. Between 1928 and 1932, this organization transformed from a purely gymnastic and cultural association into an influential platform for the production of Swedish nationalist ideology. Based on theories of National Socialism?s formation within modern society, the analysis focus on the conditions regulating Gymniska Förbundets relation to modernity. Thus the study examines the association?s ideas in relationship to the concept of modernity.

Hemsjukvårdscentralens arkiv : Ett ordnings- och förteckningsarbete

Hemsjukvårdscentralen began its work from Tunåsens Hospital in Uppsala in 1962, with the purpose to give conomic support to people who nursed their chronic sick relatives in home. Hemsjukvårdscentralen ended its work in 1987, and delivered its archive to the County council of Uppsala in 1988. About half of the archive consisted of medical records of the patients who had received economical support, and many of the archival records was considered as ?work papers?, non-archival records that could be discarded. Two obvious problems emerge from the organizing of the records.

Analog-to-Digital Converter Design for Non-Uniform Quantization

The thesis demonstrates a low-cost, low-bandwidth and low-resolution Analog-to- Digital Converter(ADC) in 0.35 um CMOS Process. A second-order Sigma-Delta modulator is used as the basis of the A/D Converter. A Semi-Uniform quantizer is used with the modulator to take advantage of input distributions that are dominated by smaller-amplitude signals e.g. Audio, Voice and Image-sensor signals. A Single-bit feedback topology is used with a multi-bit quantizer in the modulator.

BTIF - Bluetooth identifier framework: Ett ramverk för trådlös automatisk identifiering via bluetooth

Det finns idag goda möjligheter att beröringsfritt kontrollera elektroniska objekt. Ett exempel är belysning som aktiveras via rörelsesensorer.Enkla lösningar innehåller oftast sensorer för ljud, ljus eller rörelse vilka används för att aktivera ett styrobjekt, vanligen genom att slå på eller av en elektronisk strömbrytare kopplad till styrobjektet. Behövs det mer säkerhet och möjlighet att bevisa för styrobjektet vem individen är som försöker få styrobjektets uppmärksamhet behövs det mer än en enkel sensor. Det behövs en anpassning för att separera olika bluetoothenheter från varandra. Bluetooth är en teknik för att trådlöst skicka information mellan två enheter.

Konfigurationshanteringsverktyg (CM-verktyg) och CM-kriterier, dess tillämpning för presentation av migreringsdata

The purpose of this thesis is to present and describe which criteria, according to the systemfamily Configuration Management, should be met when developing a CM-tool to handlemigration data.ACT is a tool developed by Microsoft to gather information about, analyze, test and mitigateapplications in a network when migrating the IT-infrastructure of an organization to a newoperating system. The organization that is being studied wants to present the data about theanalyzed applications in such a way, that a customer can choose what to mitigate and migrate.The goal is therefore to develop a prototype (CM-tool) that will present this data.The study has shown that ACT lacks certain requirements stated by the organization when itcomes to presentation. But when it comes to the rest of the functions, ACT performs as expected.The investigation resulted in specifications and technical solution for the new CM-tool. CMcriteriafor migration data was put forth and parts of the prototype were also developed..

Resurseffektivt bussprotokoll o?ver RS-485

This report describes the design and implementation of a multi-master, packet based protocol for small and tiny microcontrollers where resources are limited. The protocol was named "Tiny Controller Network" or TCN for short. The protocol is meant mainly as a control bus for automation and sensor acquisition applications but due to its flexibility can also be used for other purposes as well. It borrows some of its functionality and design ideas from the well known CAN bus and Modbus but also has a number of major differences like the use of standard hardware and time synchronisation. One of the key aspects during the design was the use of very little system resources and common on-chip hardware peripherals like a UART.

WebSocket eller Ajax i Webbapplikationer : Är WebSockets prestanda tillräcklig för att ersätta Ajax?

Denna rapport behandlar prestandaskillnader vid överföringar med Ajax och WebSocket, samt webbläsares kompabilitet med WebSocket.Ämnet kändes relevant då fler och fler webbsidor börjar använda sig av dessa tekniker för att hämta och skicka data i realtid.Undersökningen genomfördes genom att en testapplikation skapades där data kunde överföras med respektive teknik, varpå tidsåtgången för överföringen mättes och presenterades.Resultatet visar att WebSocket har klara fördelar mot Ajax när små mängder data överförs, samtidigt som Ajax visade sig vara snabbare vid upprepade överföringar av större mängder data.Undersökningen visade även att stöd för WebSocket saknas i flera webbläsare, varför WebSocket ännu inte är redo att användas fullt ut..

IAS 40 : A study of the consequences on annual reports due application of IAS40

Purpose: The main purpose of the thesis is to examine the consequences of applying IAS40 on the Swedish real estate companies? annual reports. How does its application affect the companies? stockholders? capital and how do the companies solve the problems that occur due to the application of this standard.Method: The authors use both the qualitative and quantitative approaches to process the thesis. The primary data comprises of hard data in form of annual reports and the secondary data consists of the soft data as direct interviews and email interviews.Theory: There aren?t any theories on the subject.

Telias 4G i Umeå

This report presents the results of the tests of data rate and signal strength that I have conducted. The tests have been performed in the municipality of Arvidsjaur, Sweden. The report also contains the conclusions I have drawn from the results as well as an introduction to radio and the technology used in the nets that have been testedThe equipment used is:LG G2 cellphone used to test Telias 3GHuawei b593s-22 3G/4G router used to test Tele2s 3G/4GMobile Broadband Gateway R-90 used to test Net1s CDMAThe data rate has been tested with bredbandskollen (www.bredbandskollen.se). The signal strength(RSSI) has been read in the configuration menu of the broadband routers as well as in the cellphone.The conclussions drawn:Net1s net appears to be more used compared to its capacity than the other netsTele2s net has a high and even data rate where it?s signal strength is sufficient.

<- Föregående sida 20 Nästa sida ->