AbstractThe market?s demand to purchase more cost effective products is continuously increasing. The producers are forced to become more efficient and flexible with resources to produce high quality products at a low cost in order to maintain or increase market shares. With this in mind Isaberg Rapid AB is requesting a project to increase efficiency in the assembly cell of hammertackers. The company has found in Kaizen-events that there is a potential of efficiency improvements in the assembly group that has not been achieved.The objective with this paper is to identify the major factors that influence the efficiency in the assembly cell for hammertackers.

Stump wood was used between 1850 and 1950 for production of tar and as firewood. In the 1950s the use decreased because of the introduction of the cheap fossil oil. In the 1970s stump wood became an interesting issue again as a raw material for the pulp industry. Stump lifting has today become a possible source for bioenergy. The objectives with this study were to investigate the productivity of stump lifting and stump extraction, and to analyse the economy.

Vi har i detta arbete skapat ett API för widgets på Android och iOS för Visiarcs utvecklingsverktyg CoffeeMaker. CoffeeMaker använder sig av multiplattform-API:t Cocos2dx och försöker, i så stor utsträckning det är möjligt, förhålla sig till det reaktiva programmeringsparadigmet. Vi använde oss av olika designmönster för att jämna ut skillnaderna mellan Android och iOS interface och implementerade funktionalitet för knappar, checkboxes, radioknappar och textfält på dessa två plattformar. Dessa widgets tematiseras enligt ett JSON-liknande format och använder sig av en texturatlas för att spara resurser. Vi behövde en texturpackare som lämpade sig att köras under en applikations initiering och ibland även under själva körningen.

The conditions for a good silage process start with good wheather and choice of crop, then choice of harvesting machinery. The shorter and more mechanically treated crop, the better quality of the forage. (Pauly 1994). This study has examined the variations in chopping length depending on harvest method. Precision choppers works with a rotating chopping cylinder, where the crop is cut into pieces.

This report is a B.Sc. Forestry thesis work at the school for Forest Management, SLU. The work was an assignment from the forest owners? association Mellanskog. The aim of the work where to investigate the economical result of removing undergrowth trees before first thinning, and a follow-up of the contractors and their compliance with Mellanskog standards. This thesis work was divided in three parts: The first was to find a relation between the net volume from the first thinning and the cost of cleaning undergrowth trees. Secondly there was a follow-up in the field, to investigate whether the contractors have done the undergrowth cleaning according to Mellanskog?s directives.

The project, Glowtest Fixture, has been carried out to and in collaboration with MSA SordinLtd. MSA Sordin Ltd produces and sells ear protector and is at present a supplier on theworld market. Glowtest Fixture is a product for glow testing off detailed components in oneear protector. MSA Sordin Ltd sends today away your products for testing what is anexpensive aspect in their development. The project's aim is to take forward a test equipmentthat copes with those high nonplussed requirements and wishes that are required for anapproved physical execution.Glowtest Fixture is a physical equipment that comes used stem glow physical off all detailedcomponents in one ear protector.

Plant survival, plant damage and height growth were studied in nine wild cherry (Prunus avium L.) plantations in southern Sweden established between 2000 and 2002. All stands were located to the county of Småland. The survey was conducted during May and June in 2007. During the survey the height, diameter and quality of the cherry trees were recorded. In one stand, red ? berried Elder (Sambucus racemosa L.) was a dominant species.

This report is a B.Sc. Forestry thesis work at the school for Forest Management, SLU. The work was an assignment from the forest owners? association Mellanskog. The aim of the work where to investigate the economical result of removing undergrowth trees before first thinning, and a follow-up of the contractors and their compliance with Mellanskog standards. This thesis work was divided in three parts: The first was to find a relation between the net volume from the first thinning and the cost of cleaning undergrowth trees. Secondly there was a follow-up in the field, to investigate whether the contractors have done the undergrowth cleaning according to Mellanskog?s directives.

Today's Swedish large-scale forestry uses almost exclusively computer-aided bucking. It allows the harvester computer, using an optimisation price list (steering price list), to maximize the value of each tree. The optimisation price list can be adjusted so that the industry gets the raw material it demands from the forest. There are various simulation programs that can be used when constructing a optimisation price list. The simulation program merchandise a database of stem shapes using a given price list and mimics a harvester's work. To get the demanded raw material for the industry it is important to use a well-adjusted optimisation price list.

This study was conducted on a property with a thinning machine team. The purpose was to investigate in which machine, the harvester or the forwarder, that caused most damage to the trees in six different stands. Different factors, related to the damage frequency in the stands, were checked out. For example: basal area per hectare, thinning strength, tree diameter and the rate of production. The harvester drivers were also interviewed about how, when and why stem damages occur and how to minimize them. The study stated that 4.3 percent of the trees were damaged. Out of these 88 percent was caused by the harvester and the rest, 12 percent, by the forwarder..

This study was based on measurements of growth and shape of 50 clones of wild cherry, Prunus avium L, in south Sweden and aimed at finding out wether or not any of these clones are useful for commercial propagation. Initially, a short assembly of documented knowledge concerning wild cherry as a timber producing tree species was put together. The study of the 50 clones includes information gathered during the fall of 2006 from four trials located in the counties of Blekinge, Småland and Västergöland. The oldest trial, founded in Tranemåla, Blekinge, in 1992, was focused on offspring and aimed at discerning differences between provenances and at developing an adapted plant material. The other experiments were both clone trials and founded in 2002. These are based on 50 individuals selected from the offspring trial in Tranemåla.

Detta examensarbete är utfört på uppdrag från AVL Södertälje Powertrain Engineering AB.Målet med arbetet har varit att utveckla ett styrsystem för ett elektroniskt styrt pneumatiskhydraulisktventilsystem på en encylindrig förbränningsmotor i en testcell. AVL är enoberoende firma som utvecklar drivlinor med förbränningsmotorer samt instrumenterings- ochtestsystem. Ventilsystemet, med ett fungerande styrsystem, ska användas i AVLs utvecklingsochforskningsarbete på förbränningsmotorer.Ventilsystemet,Free Valve Technology, är utvecklat av Cargine Engineering AB och består avelektroniskt styrda pneumatisk-hydrauliska aktivatorer som opererar en motorventil individuellt.Aktivatorernas styrsystem har utvecklats helt iSimulink och implementerats som en integreraddel i det av AVL utvecklade motorstyrsystemet Raptor. Hårdvaran och plattformen är ett rapidprototyping system från dSPACE GmbH. Systemet har visat sig fungera tillfredsställande i entestcellmiljö vid lyfthöjder större än 3 mm och varvtal lägre än 2500 rpm, även underförbränning.

In order to evaluate different afforestation methods for exposed heath lands a field experiment was established in Mosfell on southern Iceland in 1989. The trial comprised six different site preparation methods (control, herbicide application, tree shelters, patch scarification, TTS trenching and mounding). In total 960 container seedlings (1+0) and 960 Nisula roll transplants (2+1) of lodgepole pine were planted. Various planting positions (furrow, hinge, no site preparation (control) and on top of mounds) were tested within the site preparation treatments. This study involves renewed measurements and analyses of the trial.After 19 years the overall survival was 51,7 %.

When Norway spruce is planted with large initial spacing and grows on highly productive sites in southern Sweden, a high proportion of the stems gets broad annual rings. The thinning programme carried out at the estate of Trolleholm aims to extract stems with too broad ring width. The 3-4 first thinnings are carried out as thinning from above, where only the thickest trees are removed. The internal distance may not fall below 5-7 meters depending on the number of thinning (short distance in young stands). The aim of this study was to examine the thinning model that is carried out at the estate of Trolleholm. A volume table is calculated to describe the model, and data is collected on temporary plots.

StoraEnso decided in year 2002 to build a pulp mill in the province of Guangxi, southernChina, and also establish eucalyptus plantations to provide it with raw material. By 2010StoraEnso controls about 90 000 of planned 120 000 ha, out of 75 000 ha is already plantedwith Eucalyptus.By using better genetic material, improve the tending, selecting the sites more careful and byusing a proper fertilization regime StoraEnso hopes to increase the mean annual incrementfrom today?s 25 m3/ha, on bark, to 35 m3/ha. This study is one part in this work to increase themean annual increment in the plantation.This master thesis is the forth in a series, that has followed up a fertilization trial that startedin spring 2006 when the trial was laid out and treatments decided. The aim with the trial is toexamine the production potential of Eucalyptus urophylla in Guangxi, southern China.