This work is a product development of a product which facilitates enduro drivers swallowing fluid while driving. My own experience of the problem and a custom survey gave me some frames and requirements of how such a product would look. To obtain the different concepts the method of brainstorming was used where I outlined the various proposals. The basic concept was that some kind of pump would build pressure in the liquid and when the user opens the nozzle the liquid will come out without the need to use the mouth to suck. The screening phase consisted of two steps.

Combustion of fossil fuels is today the dominating source of energy. During combustion,carbon dioxide is formed. The carbon dioxide accumulates in the atmosphere,which raises the global average temperature on earth through the so called greenhouseeffect. The only way to reduce the emissions of carbon dioxide from combustionin a coal fired power plant is through carbon capture and storage (CCS).Post-combustion capture is a technology to separate carbon dioxide from the uegas after the combustion for efficient transport and storage. The steady state operationof coal fired power plants with post combustion capture has already beenthoroughly investigated on a pilot scale, however much work remains to investigatethe plants dynamic operation.

The company Somas, Säffle, has assigned Fredrik Kjellin the project of finding out how ?KVTF DN250?, one of their own valves, reacts on cutting forces under production. They wish to know if and then how much it?s possible to minimize the wall thickness of the valve with neither plastic nor to big elastic deformations caused by processing.The most critical processes have been identified as rough lathing. The study has shown that the marginal for a wall thickness of two millimeters, to fall short of the yield stress in the most critical process, is good.

Given that the oil prices have risen and the environmental regulations has become more stringent, the interest in operating efficiency has increased. The project has investigated the possibility of producing electricity from waste heat generated in the diesel process. One technique to utilize and convert energy into electricity is the ORC (Organic Rankine Cycle). This process is based on the Rankine process (the steam process), the difference from the traditional Rankine process is that instead of water as a working medium, an organic substance is used. The main component used in the process is a evaporator, a turbine, a condenser and a pump.

Idag ställs stora krav på företag att vara miljömedvetna och resurseffektiva i sin verksamhet. Vid mjukpapperstillverkning används stora energimängder och inom industrin har det under många år funnits en strävan att energieffektivisera processer och att tillvarata spillenergi, bland annat genom värmeåtervinning. Valmet Tissue Technology Center i Karlstad har idag en pilotmaskinen utan värmeåtervinningssystem. Den här undersökningen gjordes i syfte att ta reda på hur stor återvinningspotentialen är för värmeväxling i pilotmaskinens torkpartier, bestående av Yankeekåpan och TAD-cylindrarna. Tre maskinkoncept undersöktes: DCT®, NTT? och TAD.

This report treats two assignments that concerns the biofuel furnace at Billerud Skärblacka AB and how these assignments were solved. The assignments were: reducing the number of CO-spikes and tuning the overfire air control loop. To reduce the number of CO-spikes the possibility that skewness in mass distribution affects the number of CO-spikes were study. The skewnwss of mass distribution was controled and adjusted with two experiments. The conclusion that was made is that the skewness of mass distribution were not sufficient enough to affect the number of CO-spikes.

The company Somas, Säffle, has assigned Fredrik Kjellin the project of finding out how ?KVTF DN250?, one of their own valves, reacts on cutting forces under production. They wish to know if and then how much it?s possible to minimize the wall thickness of the valve with neither plastic nor to big elastic deformations caused by processing.The most critical processes have been identified as rough lathing. The study has shown that the marginal for a wall thickness of two millimeters, to fall short of the yield stress in the most critical process, is good.

This is a report written for an examination project C-level, on the subject of energy. The examination project is a product of the FVB Sweden AB (district heating bureau). It started with a meeting with Stefan Jonsson FVB Sweden AB, were he explained the content of the project, and from this a presentation of the problem was made. The problem that needed to be solved was how they could control the valves in the system to provide heating to everyone in the system. The valves are often oversized so the pump in the heating plant would have to be enormous to be able to provide enough flow to be sufficient, if everyone in the system had there valves fully opened. I came up with two solutions to the problem, one was a wireless network that could keep track of the valves and the other solution was an extra sensor that was placed on the radiator.

This master thesis consists of the creation of shock absorber models for percussive rock drills. A model of the rock was also developed. These models were connected to existing models of the rock drill to create a complete simulation of the rock drilling process.When the models had been created the rock model was evaluated by comparison with measured values from lab tests. The verified rock model was then used to evaluate the shock absorber models.Four new shock absorber concepts have been developed. Three of these have been modelled, while the fourth have only been sketched and described.The evaluation of the models showed the following:? Simulations of the single shock absorber don?t correlate to reality very well.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

Denna uppsats undersöker hur förhållandet mellan karaktären, interagerbarheten ochpresentationen påverkar möjligheterna för hur spelaren uppfattar berättelsen i spelenHalf-Life 2(Valve Corperation, 2004), Fallout 3 (Bethesda Game Studio, 2008) ochFahrenheit (Quantic Dream, 2005). Metoden för analyserna är baserat på Aarseths (2007)teorier och går ut på att jag själv spelat spelen och sedan analyserat dessa utifrån minaegna spelupplevelser. Analyserna tar även upp teorier och begrepp från andra forskare, såsom Marie-Laure Ryan, Andrew Rollings och Ernest Adams, Lee Sheldon och UlfWilhelmsson.Metoden för analyserna lyckas plocka fram flera unika berättartekniker och förhållandenfrån spelen. Bland annat den dolda storyn i Half-life 2, den ytterst interagerbara välden iFallout 3 samt de flera olika huvudkaraktärerna i Fahrenheit, och hur dessa påverkarspelarens uppfattning av berättelsen. Förhållandena är dock inte generella, utan unika förvarje spel, vilket medför att resultaten också är det, och kan därför inte ses som reglerutan mer som riktlinjer för hur en berättarteknik kan se ut..

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

Göteborg Energi has a surplus of district heating during spring, summer and fall. The heat surplus is due to a constant production of waste heat from oil refineries and heat from waste incineration over the year. It would be desirable to increase the demand for heat and the uptime for the newly built combined heat and power generation plant, Rya Kraftvärmeverk. One alternative could be to integrate Rya Kraftvärmeverk with a pellet production facility. By producing heat, electricity and pellet in a joint process the energy use can be decreased.

Simulation is a vital tool during development of JAS 39 Gripen, since money and time can be saved.The Auxiliary and Emergency Power System, AEPS, is a subsystem of the secondary power system in Gripen. It has the function of providing the aircraft with electrical and hydraulical power before activation and after deactivation of the main engine. The system also functions as backup in case of a safety critical problem in the main power supply system. The system basically consists of a control unit and an auxiliary gearbox. The gearbox is driven by an air turbine.

The project was performed at SiemensIndustry Drive Technologies with theobjective to provide actual values forthe energy savings potential withinSiemens scope of practice.In Sweden the electrical drives standfor about 30 % of the total electricityconsumption and about 60 % of theelectricity consumption within theindustry. During the pre-study phaseelectrical drives with pump applicationswere identified as large energy users.Because of this a case study at one ofSiemens customers, Stora Enso Fors wasperformed. The system that was evaluatedduring the case study was a throttledsystem with a centrifugal pump forpumping pulp.The results yielded that a saving ofover 50 % could be achieved by replacingthe throttle valve with a variable speeddrive, a frequency converter. Thepayback period was two years and twomonths and the present value for thetotal life cycle cost of the variablespeed system was 662.566 SEK lower thanfor the throttled system. As aconsequence, Stora Enso Fors is advisedto invest in a frequency converter forregulation of the system.The general conclusion is that a focuson system efficiency is the mostimportant factor in energy efficiencyprojects and that the system regulationmethod has a large impact on the overallsystem losses and hence its efficiency.Energy efficiency potential forthrottled systems with centrifugal pumpsis large and significant economicalsavings can be made through investmentswith short payback time..