This thesis has been carried out in collaboration with two students at the Department of Dental Medicine at Karolinska Institutet in Stockholm, Sweden. The aim of this project was to construct a computerized decision support system to facilitate diagnosis of changes in the Oral Mucosa using information collected by the above mentioned students. A program which poses specic questions to the user was constructed with the Java programming language. Depending on how these questions were answered, one or more possible diagnoses were presented by the program. In order to conclude whether or not this program was of any use in terms of time savings, a series of tests were run and timed both when using the program and when not.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.

The students participating in my development work will work with a process book for handicraft studies. In the beginning of their studies, the students need practical knowledge about the development of the profession itself, but they also need to be challenged and learn how to solve problems on their own which will help them gain a deeper knowledge of the subject.    I focus on open questions to create a process with the students. This process is created when working with Solution-Focused-Education. Through ?assessment for learning? we can help the students to improve their self-assessment and understanding of the learning process.

The aim of this master thesis is to examine the attitudes among library staff regarding a music downloading service called Musikwebb, which is available in many Swedish public libraries. It focuses on the impact of Musikwebb on the process of music selection, the relationship between Musikwebb and the digital development in public libraries and what service Musikwebb offers its users. The gathering of material was executed through focus group interviews with library staff in four libraries. This empirical material we divided in three categories: Music selection, The Library and its digital services, and Library services. We use the results of Sanna Talja?s discourse analysis regarding the relationship between Music, Culture and the Library to analyze our material.

At the beginning of the nineties, a new form of organisation, the process organisation, was about to be born. The features of the process organisation were a flexible organisational that works in a world where the pace of development is increasing all the time. Today there are many organisations that have mapped their processes, but in order to truly become a process organisation, the processes among other things have to be in harmony with e.g. organisational culture. Which effects the organisational culture has on the process organisation is yet unexplored, but however quite crucial.

Dagens samhälle är ett informations- och kunskapssamhälle där kunskap och kompetens är nyckeln till företags framgång. En förändring har skett i näringslivet då de tillverkande företagen har blivit allt färre och de kunskapsbaserade företagen har ökat. För att kunna överleva i det nya samhället måste ledning och anställda i ett kunskapsbaserat företag ständigt utveckla sina kunskaper, sitt humankapital. Humankapitalet är den mest värdefulla tillgången i ett kunskapsbaserat företag då företaget är beroende av de anställdas kompetens och kreativitet. Därför är det viktigt att dessa företag tar tillvara på och förädlar sitt humankapital.

This Masters Thesis is about the Swedish National Council for Cultural Affairs and the arms length principle. The principle is used to explain the separation of power between two parts with a common interest. The main purpose is to elucidate if, and if so in what way, the arms length principle can be used to explain the relation between the National Council for Cultural Affairs and the Ministry of Education and Culture, i.e. the Swedish government, but also to examine the structures of power and relations within the Council. In the thesis we show that in the field of cultural policy the content of the arm lengths principle varies due to the many interpretations of the meaning.

Large volumes of excavated soil and rock are generated in building- and construction projects. These materials need to be transported longer and longer distances due to the densifications of cities. The transportation affects the environment in terms of noise and emissions, but also makes high demands on road infrastructure. To reduce the transport distances an increased responsibility for the excavated rock generated needs to be taken. Responsibility can be increased through an introduction of means of control.

Lean is one of the recent years most popular methods for organizations to use in order to increase efficiency, productivity and quality. Despite Lean's increased popularity, Lean is still difficult to define and can be explained and described in different ways. Previous studies have also shown that Lean is difficult to implement and challenging to maintain successfully. Knowledge of Lean is viewed as a necessity in the implementation of Lean, which leads to that organizations often chooses to bring in this knowledge through external consultants or other experts in order to implement Lean in their organization. Thus, it is interesting to examine the consultants view on Lean and the implementation process of Lean.

This work is an experimental study where knock sensor placements are investigated using engine tests. The aim is to studythe quality of the signal from knock sensors and how the signal for engine control is affected at different sensor locations on Scanias, engine DC13. To find out at witch position on the engine youcan get a usable signal for engine control, the engine is running while the knock sensors with advanced measurement equipment is connected to the engine. Evaluation of signals from the knock sensors are made in the computer program Matlab. The program is producing a seriesof plots, from these plots it is visually possible to draw conclusions and find connections.

The aim of this study was to evaluate the effects on a simulated wastewater plant regarding GHG emissions and use of energy and resources when implementing source separated wastewater systems. The effects were studied for different restrictions of effluent quality and for different temperatures on the influent. The simulation model BSM2G calibrated for Käppala wastewater treatment plant was used. The task was executed by simulating nine different scenarios with an increase in influent load from new connections equivalent to 3, 10 and 30 % of the present connections. These new connections were served by conventional, urine separated or black water separated systems.

ABSTRACTPurpose: The purpose of the study was threefold. Firstly, to investigate if a four week program in pain rehabilitation had any effect on how much individuals with persistent pain worked and their degree of kinesiophobia. Secondly, to study if there was a correlation between how much these individuals worked and their degree of kinesiophobia. Thirdly, to study if there was a correlation between the change in these variables.Method: 112 patients who had participated in a four week rehabilitation program took part in the study. The study had a retrospective design, which was based on a review on medical records and consisted of three minor parts.

SummaryBackground: Management control is important for all kinds of activities, both in trade and industry and in the public sector since you must economize on scarce resources. There are nevertheless many different views on management control, which have changed with the times. With regard to the public sector in Sweden, the management control systems have changed radically the last half century, especially from the 1980s, due to depressions and increased focus on effectiveness. New approaches have been taken by many municipalities and county councils, both in Sweden and internationally, where the former management control systems have been abandoned in favour of result control, target costing, and activity-based-costing, for example. Another new approach has been the Balanced Scorecard, which was introduced by Kaplan & Norton in a pioneering article in 1992.The Balanced scorecard is a multidimensional tool, originally intended to be used in trade and industry, but with regard to its nature, it has been adopted even by many non-commercial organizations, especially in Sweden.

Previous research in the area of leadership and stress has shown that the leader plays an important role but in what way is still an issue to explore. A qualitative approach was used in this study to develop an increased understanding of the leader's experience of stress using four themes; leadership, stress, control and organizational factors. A total of 12 semi-structured and un-structured interviews were carried out with 6 leaders, three females and three males. The data was transcribed and thematic as well as narrative analysis was conducted.The results indicates that leadership stress is caused by a lack of control and that factors intrinsic to the role as a leader both facilitates and complicates the leaders situation when facing stress..

Background: It is today common for companies to provide some sort of incentive for CEO's and senior management positions to motivate, retain and benefit employees within a company. This is in order to drive the goals of the CEO and management in the direction that is desired by the owner. Currently, the Swedish centre-right government has forbidden the use of such variable pay within state-owned companies. There are two different attitudes to variable pay, one that is in favour and one that rejects it. However most people agree on the fact that a well-functioning incentive scheme can be of great strategic importance for a company.Approach: has variable pay to CEO's had any effect on the company's profitability.Aim: the aim of the study is to compare companies who use variable pay to CEO's with companies that do not in relation to their profitability in terms of profit margins, yearly performance, returns on total capital and returns on equity.Method: the study uses a quantitative approach.