On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

I de nordliga regionerna förekommer kallt klimat under vinterhalvåren. Som en följd bildas is i älvarna vilket kan påverka produktionen för ett vattenkraftverk negativt. Vattenfall AB äger en mängd vattenkraftverk som årligen drabbas av produktionsförluster under vintertiden. Syftet med detta examensarbete är därför att kvantifiera och analysera Vattenfalls isrelaterade produktionsförluster inom de svenska gränserna. Huvudsakligen behandlar denna rapport de fallförluster som isen orsakar över intagsgrindarna och i älvsträckorna nedströms Vattenfalls vattenkraftstationer.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

Optimization of soil tillage and crop rotation is important in many aspects, but particularly in maximizing profit margins. Since the economic outcome is usually decisive, it can be interesting to study different combinations of soil tillage systems and crop rotations in order to identify the maximum economic outcome. How a crop functions in a particular tillage system determines whether it is profitable to grow that crop. Different tillage systems affect the soil and its processes in different ways. Reduced tillage often works best on weak-structured heavy clays and on silty clays.

Modern sawmills are using the raw-material and the production-capacity more efficiently today, due to rising raw-material prices and higher production costs. Log sweepness has a negative effect on the sawn yield, for sawmills with straight-sawing. It is desirable that these logs could be sorted based on more criteria, if it increases value-yield and consequently the utilization of raw-material. Bow-heights over 1 cm have a negative effect on sawn yield, since the surface of the mantle cuts down in the sawn pattern. Some of these small bow-heights reduce the logs yield of value which affects the production planning negatively. Nearly half of all the Swedish logs have a bow-height over 1 cm.

Glaciologer har under en längre tid observerat förändringar av glaciärer på Svalbard, att några minskar i storlek och att vissa växer. Avsmältning med ökade havsnivåer och potentiellt ändrad havscirkulation till följd är ett scenario som berör människor över hela värden. Dessa förändringar kan eventuellt förklaras genom att koppla de meteorologiska förhållandena i området till större cirkulationsförändringar.De meteorologiska förhållandena över Svalbard har simulerats med en regional klimatmodell, WRF (Weather Research Forecasting), för tre domäner med upplösningarna 24 km, 8 km och 2,7 km. Modellen har testats i två versioner, standard-WRF med förvalda processbeskrivningar och WRF med processbeskrivningar anpassade för polärt klimat och har drivits med ERA-Interim data, som är en återanalys av de globala väderförhållandena framtagen av ECMWF. Resultaten från WRF har verifierats mot observationer uppmätta av AWS-stationer (Automatic Weather Station).

Ammerån which is a small forest river in eastern Jämtland is a well-known river that has been a popular fishing river for a long time. The actual Ammerån begins downstream the lake Solbergsvattnet at Hammerdal and flows into the Indalsälven 10 km upstream Hammarstrand. The river environment switches between forests with wilderness feeling and open agricultural land. The entire Ammerån is today a nature reserve and protected from hydropower development. Fishing in Ammerån has mainly been focused on trout and grayling, and is so even today.

Syftet med projektet är att WB-Trä vill få in ett mera fungerande kvalitetstänkande i företagets produktion, från godsmottagningen genom maskinhanteringen, ytbehandlingen och slutligen monteringen. De har inga krav från deras leverantörer att de ska skaffa ett kvalitetssystem än men det kanske kommer en förfrågan inom en snar framtid så då vill de vara väl förbereda inför detta. De vill även förbättra sig själva och sina produkter, varje medarbetare ska bli mer medveten om vilka krav som dom ska jobba efter. Detta för att de som jobbar ute i produktionen skall följa en enkel manual och på så sätt veta vilka krav som ställs på den produkt som de producerar. Detta kvalitetstänkande har sin grund i att de själva vill höja deras kvalité i deras produkter och få in kontrollrutiner i det dagliga arbetet.

In this thesis a method for evaluating investments in small scale hydro power is presented. An analysis of the future position that small scale hydro production will have on the Nordic electricity market is also carried out. This is done by an inventory of technology and economic and environmental aspects. The inventory is also a guide as to how the project should be implemented.Hydrolyzer is the name of the Excel tool developed to evaluate investments. The tool requests input data from the user and then evaluates the investment and generates a sensitivity analysis.

The distance between home and work has increased in recent decades. By the development of infrastructure and public transport, jobs farther from home have become more accessible and this development has in turn increased commuting. Commuting travellers often pass over administrative boundaries which often serve as borders for public transport pricing. Also the market control prices. Research shows that travel times and costs significantly affect commuting choice.

The Swedish Transport Administration manage nearly 4,000 railway bridges in different condition and age around the country. These bridges is in constant need of maintenance and requires continuous inspections. This thesis is designed as a damage investigation on a single-track railway bridge south of Solvarbo in Säter municipality. The railway bridge is in operation and serves over 10,000 trains a year, everything from speed trains to freight trains. The bridge is built as a beam bridge, simply supported over a road.

Vid användning av nätverks-RTK behöver driftcentralen kommunicera med användarens GNSS-mottagare på ett effektivt sätt oberoende av fabrikat. Av den anledningen finns ett standardiserat format för överföring av data som är utvecklat av RTCM (The Radio Technical Commission for Maritime Services). 2006 publicerades version 3.1 som stödjer utsändning av s.k. nätverksmeddelande som innebär att komprimerade observationsdata skickas till mottagaren för beräkning av korrektioner. För att bestämma GNSS-mottagarens position används i dagsläget till största delen VRS-tekniken (Virtual Reference Station).