Prosthetic leg can give a negative psychological effect to the user, which ends up in decreased self-esteem and that the user hides his handicap. xCover gives a more natural volume and a cool look. xCover changes the look of the prosthetic leg C-leg. The product is constructed by us, Patrik Svensson and Magnus Zetterqvist, for Christoffer Lindhe at Lindhextend AB. Christoffer has hired Martin Bergman at Smedjan 17 to make the design.

Swedish agriculture stands in front of big changes the whole time. As a milking producer you have to adapt and develop the company to these changes and find the best solution. This potential is easy to find if you compare your company with other similar companies. Labour cost is the biggest cost in milking production after the cost for food. Today it is rather easy to measure how many hours per cow different system of cow houses needs, but we do not know so much about how many hours it takes to breed a calf. To learn more about the labour time with the calves during the first time after the calf was born, I made time studies on five different farms with calf hutches, automatic milk system, large calf boxes, and smaller calf boxes with teat buckets.

AbstractEmbla 5 is an office building which has done a large improvement. The clients of this building has made an order of WSP and the student Anders Kempe to calculate the use of energy for the building, and after that result proposing further measures which can decrease the energy use of Embla 5.The ground for this report is when calculation of the present energy use of the building is stated. To make that information of a number of parameters such as envelope, the heating system and ventilation has been located and set in to the simulation program IDA ICE which calculate the energy use.To improve the energy use further this project has been concentrated to change the system of ventilation. Today the ventilation system is of the kind CAV (constant air volume) and the air flow is dimensioned for after recommendations from BBR and Arbetsmiljöverket in the office spaces. Consider that Embla 5  is an office building where the people only staying for 8-10 hours/day so was the ide to see how much energy saving if the air flow is reduced the time people not being in the building.

This report provides a comparison between the products cellular concrete, foam concrete and LECA concrete. The questions to be answered during the work is how the cellular concrete stands up in cost terms to the existing competitors on the market, how the concrete products differ in design work, and in which situations the concrete varieties are preferred to use.Cellular concrete is a variant of ordinary concrete, with the difference that the ballast is exchanged from stone materials to expanded polystyrene beads (EPS). This substitution gives a product with higher insulation values but lower weight than ordinary concrete.The work was carried out by designing a survey which was sent to two hundred randomly chosen companies across Sweden, to see the building industry?s opinion of the product cellular concrete. The survey showed that cellular concrete was equals its competitors in terms of price, while the product was said to be more flexible, quicker and easier to cast.Then some of the companies, who participated in the survey, were interviewed to see more carefully, how the price, the workmanship and the time for casting and dehydration differed between the products.

A piezoelectric injector was modeled, in this Master Thesis Project which was carried out at Scania CV AB in Södertälje, in GT-Fuel. GT-Fuel is simulation program from Gamma Technology.The simulation model for the piezo injector was divided into a hydro-mechanical system and an electrical system (Piezoelectric element). First the hydro-mechanic model was duplicated from Advance Continuous Simulation Language model (ACSL). The simulation results were then compared to the ACSL, to verify that the hydro-mechanical system was modeled correctly. The simulation results for the electrical model were also compared with a Simulink model.

Prosthetic leg can give a negative psychological effect to the user, which ends up in decreased self-esteem and that the user hides his handicap. xCover gives a more natural volume and a cool look. xCover changes the look of the prosthetic leg C-leg. The product is constructed by us, Patrik Svensson and Magnus Zetterqvist, for Christoffer Lindhe at Lindhextend AB. Christoffer has hired Martin Bergman at Smedjan 17 to make the design.

Introduction: Urinary retention is a common postoperative complication associated with bladder distension. Permanent damage to the bladder affects the patient?s quality of life and may lead to a lifelong inability to empty the bladder and needs of self-catheterization with the risk of urinary tract infection. Bladder distension was classified as the fourth largest health care related injury in Sweden in 2013. Bladder distension may occur before the operation starts and is more common among orthopedic patients.

Prosthetic leg can give a negative psychological effect to the user, which ends up in decreased self-esteem and that the user hides his handicap. xCover gives a more natural volume and a cool look. xCover changes the look of the prosthetic leg C-leg. The product is constructed by us, Patrik Svensson and Magnus Zetterqvist, for Christoffer Lindhe at Lindhextend AB. Christoffer has hired Martin Bergman at Smedjan 17 to make the design.

By exposing their products in blogs, companies have the opportunity to reach out to hundreds of thousands of consumers daily. Instead of using conventional Internet advertising such as banners and ads, some companies chose to make use of product placement in blogs. By choosing to expose their products in blogs, companies use a medium that blog readers are familiar with and can relate to, and can thereby solicit customers for their products and brands.We will examine whether product placements in fashion blogs are an effective way for businesses to market themselves and their products. We measure this efficiency, by keeping a record of the sales of ten product placed garment and accessories that we have selected from four of the largest blogs in Sweden. The stores we examine sales of product placed goods in are volume brand stores such as Zara and H&M etcetera.

The competition for Norway spruce pulp wood in Central Sweden increases, forcing the supply-structure of Holmen to face two important challenges. Firstly, it is of the outmost strategically importance to secure the long-term supply of Norway spruce pulp wood to the industries. Secondly, Holmen desires to increase the obtainable volume of Norway spruce pulp wood. This would enable the company to choose volumes in the lower price-segments and thereby decrease the dependency of costly marginal volumes. As this work shows, one part in managing these challenges could be to lower the quality standards concerning root rot (Heterobasidium annosum). Facts presented in the work shows that: 1. Technically, the TMP-industry of Braviken can handle a much more rotted pulp wood than that used today, although the cost of refinement increases.

Dead wood is important for many species. The amount of coarse dead wood (diameter >10 cm) is much lower in managed forest than in unmanaged forests. Stumps constitute the largest proportion of the volume of coarse dead wood in managed forests. Since stump harvest for biofuel may increase, the amount of dead wood will decrease even more, which may threaten biodiversity. The first aim of this study was to compare the amounts of fine woody debris (FWD, .

The calf extrator?s function has been studied, through measuring traction and how this varies in different situations, in comparison with corresponding manual traction situations. This was done against the background that excessive force at assisted calvings at dystocia can mean life threatening damages on the calf such as grave acidosis, vertebral fractures, femur fractures and rib fractures. The calf extractor has earlier been measured to pull with greater force than the established maximum force of ?two strong men?.

The objective with this project was to design a new lifting aid connected to toilet chair.A questionnaire distributed at three homes for aged people indicated that there was an interest in a mechatronic lifting device.Since existing products have limited tilting functionality, the new design was chosen to introduce lifting by motorised tilting of the sitting platform. The mechanical construction was analyzed based on a maximum load caused by a person with weight 160 kg. Two linear actuators were used to control the tilting/lifting of the sit ?place, making standing-up easer.Finally, 28 persons tested the new lifting device and gave their impressions. Many appreciated the safe, stable lifting speed.

Fortifikationsverket which is the landlord for the Swedish national defence has a great problem in their forestry due to the relatively large amount of metal objects in their timber. These metal objects cause different types of economical losses in the timber refinement chain. To enable out sorting of logs containing metal objects already in the harvesting phase, Fortifikationsverket is interested of the possibility to utilize some type of metal detector in a harvesting head for that purpose.The goal of this study was to, with help of a case study, enlighten the problem that metal objects in timber cause for Fortifikationsverket and their customers of timber and to investigate conditions of to mount and utilize some kind of metal detector in a harvesting head at present.The saw timber deliveries by Fortifikationsverket during the time period 2003-2005 was used as a reference volume for calculations of economical losses. In this case study was included two sawmills where timber from Fortifikationsverket were delivered to for further refinement. Factors investigated were the type of damage metal objects caused in these two sawmills and the economical signification of these damages.

This report is a B.Sc. Forestry thesis work at the school for Forest Management, SLU. The work was an assignment from the forest owners? association Mellanskog. The aim of the work where to investigate the economical result of removing undergrowth trees before first thinning, and a follow-up of the contractors and their compliance with Mellanskog standards. This thesis work was divided in three parts: The first was to find a relation between the net volume from the first thinning and the cost of cleaning undergrowth trees. Secondly there was a follow-up in the field, to investigate whether the contractors have done the undergrowth cleaning according to Mellanskog?s directives.