Sökresultat:
8779 Uppsatser om Standardsystem och skräddarsydda system - Sida 14 av 586
TECHNOLOGY MEETS THE EYE : Utveckling av system för att jÀmföra eye tracking data med visuellt stimuli
The purpose of the project was to make a system that could extract data from a mobile eye tracker and make it comparable with data from visual stimuli. The produced system was programmed in Java and provided all the necessary parts that were required to achieve the purpose. This provides a foundation for further research to determine whether the eye tracker is sufficiently accurate to diagnose Parkinson?s disease..
Vem hittar hylla Hcf.03? En studie av en alternativ hylluppstÀllning pÄ en barnavdelning
The objective of this Bachelor?s thesis is to investigate how the public library in LuleÄ has set about implementing an alternative classification system for its children's books section and to explore why this was done. We wanted to investigate both how they have adapted the new system to the children's own way of seeking information and the library personnel's experience of using the new shelving system. We have done seven interviews to answer these questions and our choice of literature is intended to put the process of change into a wider context. The answers show that the library was dissatisfied with the former system and have instead expressed a desire to shift the focus of their classification system to their users.
Att klassificera populÀrmusik: en studie med förankring i SAB-systemet
The aim of this paper is to examine how The Swedish Library Classification System, also known as the ?SAB-system?, has classified popular music. The investigation is limited to the classification category of ?Yx Jazz, Rock and Popular Music? within the SAB-system. The development of this category is studied.
Intern   kontroll   och   ERP   system : En   explorativ   studie   i   hur   den   interna   kontrollen   pÄverkas   under   implementeringen   av   ett   ERP   system
Denna explorativa studie beskriver hur den interna kontrollen i organisationer kan pÄverkas under implementeringen av ett ERP system. Intern kontroll Àr en del av organisationens ekonomistyrning och bestÄr av organisationens rutiner och aktiviteter för att undvika risker och sÀkerstÀlla att organisationens mÄl uppfylls. Eftersom implementeringen av ett ERP system Àr en riskfylld process Àr det viktigt att förstÄ hur den interna kontrollen pÄverkas. För att undersöka detta anvÀnds i studien ramverket Internal Control - Integrated framework. Datainsamlig genomfördes pÄ en stor IT-organisation dÀr ERP systemet Navision 2009 implementeras och 10 respondenter frÄn olika avdelningar intervjuades.
Distribution av programvara i en stor organisation : fallstudie frĂ„n landstinget i Ăstergötland
Sekretessbelagd.
SmÄ UAV-system för bataljonsnivÄn - en nyttoanalys
Det pÄgÄr en transformering av svenska stridskrafter till följd av en förÀndradomvÀrldsbild och en teknisk utveckling. Obemannade farkoster studeras och bedömskunna tillföra vÀrdefulla förmÄgor.Syftet med uppsatsen Àr att undersöka nyttan med smÄ UAV-system för bataljonsnivÄnvid en internationell militÀr operation. De fyra utvalda basfunktionerna ledning,underrÀttelser, verkan och skydd utgör analysfaktorer.Uppsatsens resultat omfattar en kontextuell del och en teknisk del. Den omfattar Àven envÀrdering av smÄ UAV-system i ett typfall, strid i bebyggelse. Uppsatsen visar att detfinns ett flertal uppgifter inom basfunktionerna, som smÄ UAV-system kan lösa medvarierad förmÄga.
Gamification som möjliggörare för att motivera anvÀndare av system för tillverkningsindustrin
Gamification Àr en strategi som anvÀnder spelmekanismer och spelkomponenter för att skapa motivation och engagemang hos anvÀndare av olika typer av system. Denna studie syftar till att undersöka om gamification kan anvÀndas för att motivera anvÀndare av system för tillverkningsindustrin.Studien har genomförts med en initial litteraturstudie och kvalitativa intervjuer med experter inom gamification samt utveckling av system för tillverkningsindustrin. IntervjufrÄgor har dÀrefter stÀllts mot tidigare genomförd forskning, för att identifiera möjliga resultat.Resultatet av denna studie visar att spelmekanismer och spelkomponenter skulle kunna anvÀndas i ett system för tillverkningsindustrin, förutsatt att det finns ett tydligt affÀrsmÄl, mÀtbar och anvÀndbar data samt identifierade drivkrafter hos organisationens maskinoperatörer. Vidare har ett antal punkter identifierats som kan vara motiverande för en anvÀndare av system för tillverkningsindustrin:Möjlighet för operatörerna att följa utvecklingen i sitt expertomrÄdeKartlÀggning av operatörernas drivkrafter, vilken dÀrefter anvÀnds för att förbÀttra operatörernas arbetssituation, med exempelvis mer givande uppgifterBelöningar som utdelas Àr matchade mot operatörernas preferenser, med syfte att vara mer effektiva som motivationsskapare.
Reglering av vridbord
This report describes a master thesis performed at Saab in Arboga. The main purpose was to build a controller for a system containing a turn table and an antenna beam. The idea is to use this system on a boat where it will be exposed to position disturbances due to waves. The desired behaviour is that antennas placed on the antenna beam should point towards the same target all the time. To solve this problem the system has been modeled and simulated in Matlab and Simulink.
Utveckling av ett provtagningssystem för alkohol och aldehyder i fordonsemissioner.
A system for sampling of alcohol and aldehyde from diluted exhaust gases from vehicles powered by ethanol has been developed and tested. The major part of the work has been research of earlier work in the field and the construction of the sampling system.The part of the system constructed for the measurement of alcohol has been shown to work, however, more test should be performed. The part of the system constructed for the measurement of aldehyde was tested parallel to a commercially available system, based on the same principle of measurement, and has been shown to work well.Determination of the concentration of gaseous ethanol using a FID has shown the since earlier known fact that a FID is not able to measure a correct concentration of ethanol. Furthermore it has been shown that high concentrations of gaseous ethanol can not be kept in a bag more than a few minutes without a substantial decrease of the measured concentration..
Modellbaserad drivlinereglering
A cars powertrain consists of everything that is needed for its propulsion. The components in the driveline that transfer the power from the engine to the driven wheels are not absolutely stiff, hence they will wind up due to the torque and act as torsion springs. If you suddenly demand a bigger torque by stepping on the accelerator pedal, a so called tip in manoeuvre, and that torque is acquired from the engine as quickly as possible, the driveline will not be able to transfer that fast torque change due to its weakness and as a result it will start to oscillate. These oscillations will be transferred to the driven wheels and make the car to accelerate jerkily which will be experienced as uncomfortable by the passengers. Furthermore, there is a backlash in the driveline that will make the weakness in the driveline even more excited than it should have been if the backlash did not existed.To avoid too big problems with these oscillations there is a control system that controls the demanded torque.
Testramverk för distribuerade system
When developing software that is meant to be distributed over several different computers and several different networks while still working together against a common goal there is a challenge in testing how updates within a single component will affect the system as a whole. Even if the performance of that specific component increases that is no guarantee for the increased performance of the entire system. Traditional methods of testing software becomes both hard and tedious when several different machines has to be involved for a single test and all of those machines has to be synchronized as well.This thesis has resulted in an exemplary application suite for testing distributed software. The thesis describes the method used for implementation as well as a description of the actual application suite that was developed. During the development several important factors and improvements for such a system was identified, which are described at the end of the thesis even though some of them never made it into the actual implementation.
Molnet och dess möjligheter och utmaningar : En kvalitativ studie i hur molnet förÀndrar systemutvecklingsarbetet
As companies grow, their need for computing power will increase, which traditionally resulted in companies having to invest in more IT resources. Now, with cloud computing, companies can easily hire computer power over the Internet, on-demand. Cloud computing offers a highly scalable environment where companies can store data and host their services. This paper employs a qualitative study with interviews and literature studies to explore opportunities and challenges associated with cloud computing from a system developer perspective. The aim of the paper is to find out how cloud computing changes the conditions for system development. The paper contributes with four different opportunities and challenges that the system developer must handle to succeed in the world of cloud computing.
Kombinerat system för ventilation och rumsuppvÀrmning : Parameterundersökning i simuleringsmodell för takvÀrmesystem
A large amount of our time is spent indoors in an artificial climate. To make the experience pleasant there are requirements on the ventilation and the heating system. At the present time the most common form of heating is a radiator system complemented with a ventilation system. A ceiling heating system with combined heating and ventilation can replace the two separated systems. The benefit with a ceiling heating solution is that it saves space since the radiator system is no longer needed.
BrÀnnkammare för trÀpulver : Teoretisk analys och praktisk försök
The thesis describes a completely new biofuel system to generate particle-free heat from combustion of ash-containing biofuel particles at high temperatures.The suggested system gives opportunities to introduce biofuels in new areas.Main components in the suggested system is a heat radiating combustion chamber intended for pulverized wood, combined with regenerators to extract heat from flue gases and simultaneously preheating the combustion air.The thesis contains a description of the suggested system, theoretical considerations, calculations regarding the combustion, and includes results from tests performed.The results from calculations and tests performed concludes that the system is workable and possible to apply..
Teknik : hur arbetar pedagoger med tekniska system i förskolan?
Syftet med undersökningen Àr att ta reda pÄ om begreppet ?Tekniska system? tas upp i förskolan. Dessutom undersöks hur förskolorna arbetar med teknik enligt den reviderade lÀroplanen, Lpfö 98.Som metod anvÀndes enkÀter dÀr pedagoger satt i arbetslagsgrupper och besvarade frÄgor. EnkÀten anvÀnds för att fÄ en bÀttre bild av hur Älder, kön, tidigare utbildningar och yrkeserfarenhet förhÄller sig till kunskapen av teknikÀmnet.Undersökningen visar att alla förskolor anvÀnde sig av begreppet tekniska system pÄ ett eller annat sÀtt i samtal med barnen, till exempel vid toalettbesök, samt frÄgor ?vart tar rören vÀgen vidare till reningsverket??Vidare framkommer det att fler fortbildningsdagar och studiebesök Àr önskvÀrt för att pedagogerna ska fÄ en större vetskap om begreppet tekniska system.