The company Sol & Energiteknik wanted to examine the possibility to make a standardhouse totally energy independent. Based upon this I have, during the spring of 2007,examined the possibilities available at the market today through litterature studies, contactwith several companies and reading reports at the internet.The first thing to examine has been to determine the energy consumption for a standardhouse, and find out if there are better technologies to be used for energy conservation.My conclusion in this matter is that there are possibilities today for building a house moreenergy efficient.When I had reached the point at which my design for the house was decided, I also hadto choose the different products to use to produce energy as well as to store that energy.To produce heat and electricity to the house I decided to use a wind turbine and a solarwater heater.The most difficult part of designing a house that is energy independent is that theproduced energy must be stored somehow. Storing the heat is relatively easy beacuse theheat can be stored in a large water tank. The electricity is a bigger problem beacuse itmust be stored in batteries, which today are too expensive to be used in a standard house.In the future producing and storing hydrogen might be used to produce electricity, buttoday that technology is both expensive and not tested enough.My final conclusion is that a standard house can not be built to be totally energyindependent today, unless it is very expensive to connect the house to the electricitynetwork. As an alternative solution I came up with a proposal for a house which isconnected to the electricity network and have some amount of own produced energy.This house prooved to be a good investment if you choose to build it today, and it couldbe a very good investment in the long run beacuse energy prices increase every year..

The design regulations of Boverket (BKR) have long been the mandatory standard for construction design in Sweden. However from the end of the year 2010, the BKR will be replaced by the European standard Eurocode (EC). The transition to EC has been delayed and it is not until the second of May 2011 that the use of EC will be mandatory. Because EC and BKR differ from each other it is highly interesting to investigate and explain these differences.The purpose of the thesis is to compare the two standards and investigate how they give different results or not for the dimensioning of structures of steel with associated loads. The current project HVC (Pets Science Center) in Uppsala is used as a model for the design of the steel structure used in this study.

 Date: 2008-10-06Level: Bachelor thesis within Information Technology and business economics, 15p, EIK021Authors: Anna Karlsson, akn05009@student.mdh.seLena-Maria Lindström, llm05002@student.mdh.seMagnus Wretlund, mvd05001@student.seTutor: Marie Mörndal Title: Managing IT-incidents, a case study at ICAs IT department                            OperationsKeywords: IT-incident management, IT-incident management process, IT-incident, ITIL, CCTA Problem: An organization can benefit by having an established management process of handling IT-incidents. But how can this be achieved? Are there step-by-step procedures? What´s included in the management process of IT-incidents? Is the size of the organization relevant to which model is to be chosen? Can the work of the writers of this essay result in a recommendation of a specific model for IT-incident management? These questions lead to the following essay question; How are IT-incidents managed?Purpose: The purpose of this thesis is to describe and discuss how IT incidents can be managed.Method: The writers of this essay have performed a case study at ICA, a Swedish food retail company. Eleven interviews with nine different persons have been carried out. The interviews are analyzed in the chapter called Resultat och analys.Conclusion: Our conclusion is that there are both similarities and differences in Dept.

Anoto är ett litet företag som, med hjälp av ett koncept bestående av en så kallad digitalpenna och tillhörande papper vill etablera en global de facto standard för pappersbaserad digital kommunikation. Hur har Anoto gått tillväga i sitt försök att etablera en de facto standard för pappersbaserad digital kommunikation? Syftet med uppsatsen är utföra en fallstudie av Anotos försök att etablera en de facto standard för pappersbaserad digital kommunikation. Målsättningen med fallstudien är att beskriva och analysera denna standardiseringsprocess. Vi har kommit till slutsatsen att för ett företag som Anoto kan ha en chans till standardsättning och att knyta allianser med stora internationella företag beror helt på i vilken utsträckning de lyckats uppnå utväxling, skapa tydliga indirekta nätverkseffekter, bygga upp förväntningar för konceptet, samt koordinera nätverksansträngningarna.

This thesis investigates how Ericsson AB should do to achieve fast and secure handover when roaming in a WLAN. It also provides a security analysis of the system that the wireless access point is part of. The reason for this is that Ericsson is selling an access point called the ABS 2200 aimed at the public hotspot market. The premise was that they wanted a standardized way of handling the roaming issue. At the outset the 802.11F standard looked like a good alternative (in fact the only standardized alternative).

Of all observable societal trends, the proliferation of standardizing processes is striking. Auditing standards are an illustrative example of this. Not only privately owned companies must today make available numbers and key figures to satisfy needs of information and knowledge. Government agencies are increasingly conforming to this trend, adopting standards for quality assurance and monitoring, producing numbers and annual reports ? despite their somewhat ambiguous task and role.

The purpose of this paper is to describe methods to computerize a library and to compare theory with a process in a school library. The case study is based on a school library called Sunnerbogymnasiet which is situated in Ljungby. My questions are;- Which methods are parts of the process to computerize a library?- Which methods are used in the process in Sunnerbogymnasiet?- What does the practical process look like compared to the methods described in theory?In the paper I present the methods in the process according to the studied literature and compare these with a process at Sunnerbogymnasiet. The most significant result is that cooperation between the school library and the community library was the most important reason for the choice of library computer system.

En svensk standard, SS 812310­ ? Dimensionering av fiberbetongkonstruktioner, har nyligen tagits fram som skall säkerhetsställa kvalitén och underlätta dimensioneringen av stålfiberbetongkonstruktioner. Tidigare har det inte funnits en dimensioneringsstandard som täcker in området stålfiberbetong. Det har varit upp till enskilda konstruktörer att dimensionera utifrån metoder angivna ur ?Svenska Betongföreningens rapport nr 13?.

Communication between parties in an important process in their relationship can be based on a contract. This communication can for exemple be composed by a handwritten contract or an electronic contract. Contract law makes no difference between these two forms. to create more favourable requirements for commencing a contract or an ongoing contract there are possibilities to use standard agreements. Therefore a contract can be based on the will of the parties or on a standard agreement.An electronic signature shall secure that electronic transferred information has not been altered and also to identify the sender of the information.

This report was made for the company HordaGruppen AB to investigate how information security was handled. This report fits in the Master program of Internet Technology at School of Engineering in Jönköping University in Sweden.The question at issue was how you protect your information against different threats. One question was how to make an information security policy and which guidelines you can follow in the Swedish Standard, SS-ISO/IEC 17799:2000.Another question was to investigate the information sources at the company and which threats there are against it.The work begins with a presentation about information security for the chief of information and the chief of quality in the company. The next thing was to do a survey of as thing are at present with a tool from Länsteknikcentrum called ?Infosäkpulsen?.

One of the most crucial entries in the financial statements is revenue. Despite the importanceof revenue a lot of mistakes are made concerning this entry because of the extensive room forjudgements. Especially in the construction companies where a lot of differences exist due tothe fact that different standards are used for similar business transactions.The research concerning IFRIC 15 and the new upcoming standard for revenue recognition isnot very extensive. Studies including both IFRIC 15 and the new standard are even morelimited. Therefore this study aims to compare the effects of IFRIC 15 and the new upcomingstandard for revenue recognition, Revenue from Contracts with Customers, in three Swedishconstruction companies.

The main aim of this paper is to consider the possible effects of a transition to a new accounting standard for goodwill. According to IASBs Exposure Draft of Proposed Amendments to IFRS 3 Business Combinations there is an inconsistency in the currently used purchased goodwill method. The full goodwill method is considered to be a superior alternative and is therefore suggested to become the standard from 2007. This paper comprises a quantitative study of the effects on certain key ratios for companies listed on the Stockholm Stock Exchange, arising due to the proposed transition. The period examined is 2004 and 2005.

This study investigated the possibility of implementing three standards, Transistion Minimized Differential Signaling (TMDS) and two versions of Stub Series Terminated Logic (SSTL), for inter-chip communication in a specific manufacturing process. The two SSTL standards were implemented in one transceiver system while TMDS was implemented in a separate system. The evaluation was done with Spice simulations on schematic level with some parasitic capacitance and resistance. The idea was to investigate the possibility of implementing these standards and get an idea of eventual shortcomings. In order to create models as a basis for evaluation, simulation environments with models for circuit board and packages were created and transmitters and receivers were designed.

In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.

The purpose of this thesis is to examine the organizational buying behaviour in the purchase of travels abroad. We have conducted a case study of two companies, one medium sized and one larger. Our empirical studies have shown that the companies? buying process is divided into two types, the process of recruit a new travel supplier and the process of a straight rebuy of a regular travel service. In the recruiting process we found that the evaluation process of the purchase is an ongoing process that contradicts estab-lished theories.