In this thesis, a transparent model of the human head has been constructed which was filled with a substance that represented the brain. This model was later crash tested. This was done in order to examine how a transparent model of the human head can be constructed to generate accurate data from crash tests. It was also done in order to examine how impacts on the front of the head can deform the rear of the brain. When a head is decelerating, the brain moves forward inside the skull and may hit the front of the skull.

Testing has always been an important task in the scope of software quality. Though it has never been as much appreciated within the management of the organisations as the software development has. However testing is becoming more attractive within organisations because it becomes more evident how much money working systems saves in contrast to defect ones. A tester often use testing tools to simplify the work progress. There are a lot of tools nowadays but not many evaluating models which helps the tester to know which one to recommend.

The aim of the study was to investigate if the Grazemore Decision Support System (DSS) is able to provide a grazing management strategy that gives a high utilisation of grazed grass in milk production in the north of Scandinavia. To do this, a grazing experiment was planed and performed during the summer 2005. Simulations in the DSS were run to get a suggestion of how the cows should graze, grazing calendar 1. Deviations and updates during the season resulted in the simulated grazing calendar 2. During the experiment, the actual milk yield was recorded twice weekly. The difference between actual and predicted milk yield by Grazemore DSS was analysed statistically with regression analysis and the mean square prediction error (MSPE) was estimated.

This thesis project has been written and accomplished in cooperation with HABO AB. The objective of the project was to develop a standard stated packaging system. The background to this is that HABO is not pleased with the system currently in use. The system which HABO is currently using consists of to many sizes. The largest benefit of a standard stated system is that it becomes much easier to organize the packaging with the aid of a computer program.

The purpose of this study is to find out what preschool teachers think about antisocial children's literature. Based on five qualitative interviews with teachers at a preschool that works with a standard critical approach. In order to fulfill my purpose with this study, I focused on how these teachers felt that it was important to use the standard critical children's literature in preschool. I wanted to find out what the teachers' thoughts were on the concept of standard critical children's literature and how and whether they use it in their daily activities. When I analyzed the results of my interviews I used the queer theories that include standard critical pedagogy and literature in preschool.

Calculations of net present value are based on a discount rate, which requires knowledge about the company?s cost of debt. A common way to do this is by observing the company?s credit rating, when no credit rating is given it?s possible to use a synthetic rating model based on quantitative data to estimate a credit rating. Thus, the aim of this study is to increase the understanding of which quantitative data, in terms of key figures, that can be used to explain the given credit ratings for companies from the Nordic countries.In developing the model, key figures found significant in previous studies are being tested for whether or not they are applicable for companies from the Nordic countries.

Evaporation is a part of the chemical recovery department at wood pulping mills. The purpose of evaporation is to remove water from the black liquor, which makes the liquor combustible. The process is very energy demanding, and having a well-functioning model of the system is of greatest interest. The model can then be used to study energy consumption and to test different control strategies. Two models have been developed during the master thesis.

This paper aims to find out how to implement an information security management (ISMS) system that is based on ISO/IEC 27001-standard into a small organization with high employee turnover. The standard employs the PDCA-method as a course of action for implementing the standard. The reason for implementing such a system is to introduce information security to the organization and to maintain it despite the changes in management. The paper based it?s survey on a case study of a student nation in Uppsala, Sweden.

In this paper the possibilities to replace metal with plastic in products for the building industry were looked into. The first part was a market examination where several suitable products were found. After evaluation the door latch for in-house doors was selected to be re-designed to better suit the properties of plastic.New types of mechanisms were designed with different functions that use the benefits of plastic materials. Models of these mechanisms were developed to evaluate their function. The components in the different mechanisms were adapted for manufacturing with injection moulding.To confirm that the plastic material could handle the appearing stresses calculations on the most vulnerable parts were carried out.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

The aim of this master thesis was to create a dynamic model for the processes in a solid fuel boiler of the moving grate type. Another aim with the model was to keep it as simple as possible but still able to catch the dynamics of the processes in the bedplate of the boiler. The creation of the model had its origin from drying and combustion equations used in earlier modeling work of boilers. The represented model has been used to simulate different kinds of disturbances in a boiler and different ways to control the boiler. These tests show that controlling a number of parameters in the bed of the boiler is an effective way to keep the grate stable during disturbances.

This master?s thesis describes the development of a model of the catalystsystem aiming at control by an MPC. A well functioning model, which is suitable in control purpose, is important while emission legislation become more and more hard to fulfill for the car manufacturers. Much research has been done in the field of physical modeling of the system, but in this work a linear adaptive time discrete ARX-model is developed and validated.The systems tendency to change its dynamic during usage implies that the model must be adaptive. The developed model proved to be well functioning and shows promising conditions for the MPC design.

The design regulations of Boverket (BKR) have long been the mandatory standard for construction design in Sweden. However from the end of the year 2010, the BKR will be replaced by the European standard Eurocode (EC). The transition to EC has been delayed and it is not until the second of May 2011 that the use of EC will be mandatory. Because EC and BKR differ from each other it is highly interesting to investigate and explain these differences.The purpose of the thesis is to compare the two standards and investigate how they give different results or not for the dimensioning of structures of steel with associated loads. The current project HVC (Pets Science Center) in Uppsala is used as a model for the design of the steel structure used in this study.

Den här rapporten har som syfte att utreda vilket eldistributionssystem för offshoreenheter som sparar mest vikt och utrymme. De två elsystem som jämförs är GVAs standard system och Siemens Blue Drive System. Rapporten innehåller en teoretisk bakgrund för båda systemen och dimensionering av systemens kraftkablar samt beräkning av kabelvikter och komponentvikten för systemen. För att uppskatta kabel- rutter och längder kommer ritningsunderlag för GVAs offshoreenhet 7500 att användas.Resultatet visar att GVAs standard system är det eldistributionssystem som har den lägsta totalvikten med 168 ton, GVAs standard system har en vikt som är 101 ton lägre än Siemens Blue Drive System som har en vikt på är 269 ton. GVAs standard system har en lägre ström vilket gör att ledararean blir mindre och i med det blir kabelvikten mindre.

Automationscenter & Bråvalla Elteknik AB is a company that offers the market completed total solutions where the customer can operate and monitor their production from the terminal. In these total solutions they lack standard circuit which are developed by the company and which could manoeuvre/control/monitor controlled process objects. This report defines the work of developing the most common standard circuits.The report is initiated by a short theoretical part about PLC and the PLC system, with a connected terminal, which has been used. Thereafter, the turnout of the demands of specification is reported, after discussing with the supervisor in the course of the project. The report concludes with a disclosure of how the programming, the documentation and the testing have proceeded and a final discussion concerning the project and proposals on continuation.The result is a CD with the documentation of standard circuits and how they are implemented in a new project.