The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

Organisations tend to focus more and more on product and process development to increase their competitiveness. Several major organisations, among them ABB, have developed models aimed to more effectively control and manage product development processes. ABB is using its standardised model ABB Gate Model for this. The purpose of this thesis is to analyze how the introduction of ABB Gate Model has affected the outcome of decisions and also the decision-making in the product development process. The study is limited to elucidate the version of ABB Gate Model handling product development projects.

The purpose of this paper is to analyze the ongoing changes in German family policy. It explores the issue of whether the German welfare state, in this policy field, can still be regarded as a conservative welfare model or rather approaches a more liberal or social democratic model. A qualitative method is used to analyze the material, especially from the German government, including press releases, other public documents and also articles from the political weekly magazines Der Spiegel and Die Zeit. The changes analyzed are the new parental benefit, the expansion of child care, the concept of whole-day schools and the system of joint taxation. The point of departure is Gösta Esping-Andersen?s categorization of three types of welfare states: the social democratic, the conservative and the liberal.

AbstractIt is important to choose which spare parts to keep in stock. With the right spareparts in stock the costs for inventory and production loss will decrease. Cavalieri et al. (2008) highlights that the balance between inventory cost and production loss is underestimated.  It affects the company and must be considered before decision on purchase.The problem with spare engines is that they are all more or less critical for the production. That can be a reason for why no previous research targeting engines and classification of with engine should be kept in stock has been found.

This case study is made on assignment of Södra, region Öst, as a part of a campaign promoting more active management of the oak forests in the region. Hardwood trees of good quality, especially oak, has a high value due to that the sawn material is highly estimated by the market. It is important that the Swedish oak forests are managed in a proper way in order to meet the future demand. Södra has therefore decided to increase the focus on oak in the Kalmar region and they would like to find out if continues cover forestry (CCF) under certain conditions can be an appropriate management model. The motive is to make use of the existing oak forests more efficient, not just considering well managed forests but also the more neglected oak forests, on poorer soils. Thus, the objective for this study is to examine if CCF is appropriate method in the three stand types; broadleaved mixtures oak forest, oak islet, and oak/spruce forest. Existing management models were surveyed in the literature.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

This thesis has been carried out in autumn 2009 at Uppsala University for Boliden Mineral AB. Physical modelling has been used to model a comminution circuit. The model has then been linked to a PLC.When a concentrator is about to become operational Boliden Mineral AB have been looking for a way to test the PLC. The purpose of this report has therefore been to develop models for the subprocess in a concentrator and link these models to the PLC. The subprocess was a comminution circuit in Aitik36.

In the field of maintenance management there are but a few models an organization can use. The one model that has risen to the status of being the de facto standard in Sweden is pm3(på maintenance management model). The aim of this study is to lay the groundwork for a new method of evaluate the use of pm3within organizations. Today there is no uniform way of performing such an evaluation, which is necessary in order to diagnose the performance of the systems maintenance organizations.In the process of creating our own method for performing this kind of pm3audit, we further developed the ideas from a study by Lagsten & Nordström (2013) that was performed at the county Region Skåne. The authors of that study had developed ideas about using method rationale as a basis of creating a method for pm3auditing.

This study analyzes 66 Swedish actively managed mutual funds investing in the Swedish stock market during the period 2005-2014. The purpose is through pooled data regressions analyze the relationship between both the mutual fund?s annual fee and risk-adjusted return to the fund?s characteristics. The characteristics of the study are the size of the fund's assets, age, if the fund is bank managed or not, Tracking Error, and standard deviation of return.By using the performance measures of CAPM, Fama and French 3-factor model, and Carhart?s 4-factor model monthly risk-adjusted returns are created for all funds over the period.

In 2011 the International Accounting Standards Board issued amendments to IAS 19 Employee Benefits. The new standard is effective from January 1st 2013 and one of the largest changes in the standard is the elimination of the corridor method. Through the corridor method companies had the possibility to defer actuarial gains and losses resulting from their defined benefit obligations (pension obligations) and leave them unrecognized off the balance sheet. According to the new standard companies reporting under International Financial Reporting Standards will have to recognize all actuarial gains and losses immediately in other comprehensive income. The aim of this thesis is to examine how the financial key ratios of Swedish listed companies will be affected by the elimination of the corridor method.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

This thesis has been conducted at Saab Bofors Dynamics AB. The purpose was to investigate if a non-linear missile model could be stabilized when the optimal control signal is computed considering constraints on the control input. This is particularly interesting because the missile is controlled with rudders that have physical bounds. This strategy is called Model Predictive Control. Simulations are conducted to compare this strategy with others; firstly simulations with step responses and secondly simulations when the missile is supposed to hit a moving target.