Ett konsultföretag får in anbudsförfrågningar och måste därmed göra kalkyler för dessa förfrågningar. Med hjälp av ett webbaserat system där en anställd kan göra kalkyleringar kan företaget få ett gemensamt sätt att arbeta och uppföljningen underlättas. Systemet som har skapats ger användare möjlighet att göra anbudskalkyler genom en överskådlig och lättarbetad webbsida, där man kan se förhållandet mellan företagets kostnad gentemot kundpriset. All information lagras persistent i en databas för att möjliggöra uppföljning och synkronisering med andra system som används på företaget..

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

sustainable development by reducing the energy use by EU:s directive of energy efficiency and the UN Convention. The second purpose is to present the technical solutions regarding ventilation and heating system that is being used in passive houses. This was done using 8 passive houses, 4 germany and 4 swedish passive houses. Even the international and Swedish system requirements for passive houses have been addressed in this project. The goal was also to explain how and why the mechanical system in passive houses has developed to the technology used today.

The actual project presents the development of a testing rig for a steam engine. A short overviewabout the development of steam engines is presented, until arriving to the development of thepresent engine, which will require to be tested in different ways.The testing rig studied on this project (based on a Lanchester engine) will be used to testdifferent materials and layouts for the group Piston-Cylinder.The engine is a high performance steam power engine, which is going to have a highpower/dimensions ratio, what will lead to require high performance components and materials.An introduction to the testing rig is presented, and the entire design project is done in order toreplace the disappeared documentation of the current testing rig, built on the 1970?s. Also somemodifications done in the original testing rig are presented, as well as some detected problemsand their possible solutions..

Our aim with this thesis was to closer study business intelligence to be able to present an overview of both the concept and the phenomenon. We have also developed a framework that show how business intelligence can be used effectively. We think that our framework can be of help to under-stand the areas which constitutes the core of business intelligence. We think that the framework we have developed is a good basis for the im-plementation of business intelligence in an organisation and that it also can be of help in the daily business intelligence work..

The purpose of the study is to investigate the possible effects of an unstable ventilation system and its influence on energy use and thermal comfort. The report also explores how qualified personal working with HVAC view and handles system control.In order to meet the requirements in energy efficiency and a comfortable indoor climate control regulation is a prerequisite. With optimized increased complexity of the climate systems, it becomes more challenging to control the system and the risk of unstable control increases. No previous studies about what affect an unstable system can have on energy use and thermal comfort have been found.The report is based on several tests were the controlling variable has been increased until the system becomes unstable. Two different types of unstable systems have been investigated.

The increasing complexity in the development of a configurable real-time system has emerged new principles of software techniques, such as aspect-oriented software development and component-based software development. These techniques allow encapsulation of the system's crosscutting concerns and increase the modularity of the software. The properties of a component that influences the systems performance or semantics are specified separately in entities called aspects, while basic functionality of the property still remains in the component. When building a real-time system, different sets of configurations of aspects and components can be combined, resulting in different configurations of the system. The temporal behavior of the system changes and a way to ensure the predictability of the system is needed.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

I föreliggande studie undersöks hur användare upplever användbarheten i ett säkerhetskritiskt system ? Luftfartsverkets flygledningssystem SIGMA. Utifrån litteraturstudier definieras begreppen användbarhet och säkerhetskritiska system. Empirin utgörs av intervjuer med användare av SIGMA-systemet. Studien visade att användarna upplever att systemet i väsentliga delar har bra användbarhet, vilket utifrån litteraturstudier, intervjuer och efterföljande analys främst tycks bero på att systemet arbetats fram med stor användarmedverkan och att det var utarbetat specifikt för arbetsplatsen.

Since the end of the eighteenth century forest damage caused by the pathogen Gremmeniella abietina has been observed and documented. During the latest epidemic in Sweden more than 480 000 hectares forest land have been injured and this has lead to considerable economic losses. For the pathogen to succeed with infection, spore dispersal and colonization the right environmental conditions is required. The aim of this paper is to describe the diseased stands using site and stand characteristics and to evaluate the effect of these variables on the disease incidence. Further, the thinning performed during the time for spore dispersal and its relationship to injured stands is examined.

This master thesis work was done at Saab Underwater Systems AB, a company at the cutting edge of underwater technology. Here torpedoes and other underwater vehicles are developed and manufactured. The major customers are navies of different countries, mostly the Swedish navy. The aim of this master thesis is to develop, construct and evaluate an automatic Trim System for Unmanned Underwater Vehicles. The task of the system is to change the position of the centre of mass and the vehicle?s total mass or volume.

Elever ska enligt kursplanerna i teknik få förståelse för de tekniska system de möter i sitt dagliga liv. Genom att eleverna får kunskap om teknik i allmänhet och tekniska system i synnerhet får de möjlighet att påverka sina liv som medborgare i en demokrati. I litteraturen saknas idag studier om elevers uppfattningar om tekniska system. Syftet med detta examensarbete är därför att studera vilka vardagsuppfattningar elever har om de tekniska system de möter i vardagen. Studien utgår från systemteori vilken ger en möjlighet att utnyttja det gemensamma mönster som kännetecknar analys av system.

Wind power is an energy source that is becoming increasingly popular in Sweden and around the world. The establishment of large wind farms supply and contributes to energy production within grid in search of a more sustainable energy production. Wind power is becoming more popular and opens up new areas of implementation. More cities are starting to use small-scale urban wind power, everything from full-scale work for a little less work adapted to the villas. Sweden has high goals regarding the production of green electricity and the work which deals with the conditions Sweden plays in achieving those goals.

Our society has faced monumental changes and therefore our working life has changed as well. We are now in the twentieth first century and still our labor market is gender-segregated. Today networking is an important part of working life and one cannot emphasize enough the importance of having good connections in your network. Networking is now seen as an important tool when it comes to your career. In the past networking has been the men?s arena and it has almost been seen as a male institution.