Aim: The purpose of this study is to explore how the media through a certain discourse constructs a view of the labor market and the power relations between companies, unions and employees. The goal is to explore this through studying the media coverage of SAS? financial situation between September-December 2012 and our research question is the following: What view of the labor market and its power relations was constructed and reproduced by Swedish newspapers through their portrayal of SAS during September-December 2012?Method: This study analyses the findings with the help of questions based on theories of social constructivism, discourse, agenda-setting and power. A content and discourse analysis was compiled of 360 articles from five Swedish newspapers that addressed SAS and their situation from September-December 2012. The results of these analyses were further processed using power analysis and John Gaventa?s power cube.Results: In this study we conclude that the medial discourse constructs identities of the different actors and affect power relations between them, in favor of the company.

This project concentrates on musicians who work in a professional music studio.The task of this project was to design a new headphone system called Foldback system.The advantage of this system is that all involved in a music project could influence their ownlistening during the project. With a couple of adjustments should each and everyone get theirown individual listening from their headphone station.This report shows different methods, theories and results that came along in development ofFoldback system. The project has resulted in a finished product that will be in use atStudiomega..

The purpose of this study was to examine how social work professionals view their professional role and how they think about the concept of social work. I also wanted to investigate what they believe characterize a professional social work. For the purposes of this study, I chose a qualitative approach in which I interviewed five people linked to the social work. The theories which I have assumed in the analysis of the results are power theory, organization theory and professional theory. The results of this study show that the respondents believe that a professional social work is performed by someone who has training and experience in the field.

The aim of this thesis is to form a theory of the green consumer power and to distinguish whether this phenomenon could indicate a movement toward the ecological citizenship. To do so, scientific theories regarding the responsibility of companies have been used, as well as the public choice theory, to link individuals as citizens to individuals as consumers. The motives of corporate environmental responsibility, along with consumers ability to bring pressure in different dimensions, are later drawn on as indicators applied to empirical information. The largest producer of ecological products in Sweden, Arla Foods, is employed as case study to explore if the green consumer power can and does exist. The ecological citizenship uses the ecological footprint, to define in what ways we can minimize our part of environmental degradation.The study seems to strengthen the theory, consumers do have a power to make companies go green and they tend to use it increasingly.

The purpose of this study has been to investigate advantages and problems with distributionsystem metering in substations. This report is a study in cooperation with Göteborg Energi.The analyses in this report are made for GENAB, a subsidiary company of Göteborg Energi.To analyse advantages and problems in advance is interesting information for GENAB. Theresult of the report could be based upon whether installation of metering in distributionsubstations will be implemented and in that case which kind of measurement that is relevant.The most relevant and strategic place to implement measurement is at the distributionsubstations on the secondary side (400V), this is due to the placement of the currenttransformers. The measurements in this study involve current, voltage, power, power factor,temperature, energy and power quality.Measuring instruments that are relevant to implement are intended to measure current,voltage, power, power factor, energy and, possibly, power quality in the same measuring unit.It is desirable to have a measuring instrument that measures both energy and power qualitybut since it is most often a cost question, it can be established that energy meters have a lowercost.Metering in distribution substations gives a better illustration of the power network. Thisresults in many advantages for GENAB.

Academic research concerning how to determine the power situation in a supply chain where an investment product supplier is involved did not exist. Therefore new models has been developed that analyses the power relations and maps out the power situation in a supply chain. In the future these models can be applied on similar cases by modifying the included parameters. The new models show that case company FAS should focus on the big producers of garbage bag which are Trioplast, Rullpack and Miljösäck. By strengthen the brand FAS can make more money in these relations.

This report describes how the process has evolved during the creation of a new web page forthe company Scandinavian Travel Agent DMC. The design methods that have been used aredescribed and also how parts of the webpage have been created by using the design methodresults. Our reflections around design and functionality are explained and how usability hasbeen our main focus during the master thesis. We also describe how it has been to work withan external costumer and how the tasks constantly have changed and been added as theprocess has continued.The background to this work is that AB Scandinavian Travel Agent DMC need to improve theircurrent web page. This to give the clients better needed information about destinations, butalso to stand out in the competitive travel business.

 With the increases in fuel costs due to the depletion of the world oil reserves and the increase of greenhouse gasses as a consequence to using oil as a fuel many companies are looking to new and innovative ways to power their aircraft. One of these new ways to power an aircraft is using fuel cells powered using hydrogen and oxygen, thus producing nothing but water vapour and small amounts of nitrogen dioxide as well as trace amounts of other emissions. Both Boeing (1) and Politecnico di Torino (2) have shown that it is possible to build an all-electric aircraft powered by fuel cells. Both flights used small, two-seater aircraft and a constant between them was the loss of the co-pilot seat due to weight and lack of space. As this paper will deal with a commercial aircraft a primary concern is the cargo and passenger capacity and whatever impact switching propulsion system has on these.

Background: It has been shown that EDI can yield positive effects within companies. Which effects are possible for a company to direct assign to the introduction of EDI and is it possible to estimate the total effect.Purpose: The purpose of this study is to estimate and analyze the effects of using EDI in electronic business. We also want to contribute with a model for measure and estimate the effects of EDI.Accomplishment: We have studied literature concering EDI and realized a preliminary studie in form of interviews with experts to establish deeper knowledge of EDI. We have also tried to estimate the effects obtained in companies in three different businesses, power, government and transport industry.Result: To obtain as good effects as possible it is important that the co- oporation is built on trust and engagement. Before implementing the EDI-system a thorough overhaul of the processes in the company should be done, involving both the top managers and the staff.

Historically transformers with system earth equipment have been modeled as open circuits in zero sequence. This approximation has been satisfying, but lately it has been discovered that equipment on one side of the transformer have responded to faults that occurred at the other side. Most of these problems took place when the majority of the system on the secondary side of the transformer contained cables. These findings have led to questioning whether or not the former model of the transformer in zero sequence is correct. This report investigates if it is necessary to represent the transformer in zero sequence in another way than it is usually done today.

Wind power is one of the sources of renewable energy which has to be developed further in order to lessen our dependence on non renewable sources of energy. It's mainly oil and coal which have to be replaced by green energy. Wind power is already established in many countries, for example Germany, The United States of America and Denmark but it has to be continually developed and expanded to meet the needs of the growing energy consumption in the world. During the last few years many types of small wind turbines have appeared on the market. These small wind turbines are an alternative to the big wind turbines or power generators which demand huge sums of investment money.A new target group can now buy the small wind turbines in order to cover their own usage of electricity.

The exhaust arrangement on a Scania V8 consists of one manifold at each bank connected to a twin entry turbine (8-2-2). A study in GT-Power has shown improved performance and reduced cylinder to cylinder variations using two manifolds at each bank in combination with a single entry turbine (8-4-1). This thesis work analyses the difference in performance shown in simulation and verify it by engine test.The initial work was focused on simulation in GT-Power. Investigating how exhaust manifold volume and pulses effects the turbine efficiency and the mean effective pressure during the gas exchange. To verify GT-Power simulations four engine tests with different exhaust arrangement have been made.The results from GT-Power simulation indicate that a larger exhaust volume improve the turbine efficiency.

Fortum has in a pilot project installed metering equipment with wireless communication in secondary substations in Stockholm. So far, the collected data are used only in specific projects.This master thesis was carried out at Fortum Distribution AB in Stockholm during 2013. The purpose of this study is to simplify and enhance the use of data in for example network planning process, by giving suggestions on how data can be managed and giving examples of analyzes that collected data can be used for.The electricity meter which Fortum has installed is a EDMI-Mk10A which is set to measure max/average/min values with a one hour time resolution of the following parameters: voltage (per phase), current (per phase) andactive power and active and reactive energy.In order to analyze the collected data an analysis tool is required. During this thesis two customized tools in Microsoft Excel have been developed, one for sorting data and one for analyzing.One aim of the thesis is to show examples of what collected measurement data can be used for. This work shows an example of analysis of active power, power factor, voltage, occurrence of interrupts and the relationship between outdoor temperature and power.This master thesis has among others resulted in the following advice: Expand the number of secondary substations with measuring equipment.

The problem, which I want to highlight in this essay, is about my fear of losing face in conversationwith the parents of my text. I'm going through different approaches to find out what is happening inmy meetings with parents. I will also see if the knowledge that I get will help me to get deeperunderstanding of my reactions in different situations and if this opens up new possible ways ofhandling them.In my text there will be two stories where the conversation with parents has been difficult. Theyboth illustrate my uncertainty concerning the unpredictability of conversations with distressed orstressed parents. I can prepare the environment, by cleaning and making it look nice before meetingwith the parents.

The author of this report has created a Web-based invoice system and CRM at therequest of the company Webhouse.se. The purpose of the System is to makeeveryday tasks in the company easier. The system also needed to prevent mistakesand errors by managing orders and invoices.The system has been created with the company?s requests in focus. During thedevelopment of the system information security and interaction design have beenimportant aspects that have been taken into consideration.The system has been created using techniques such as PHP and MYSQL.