This report is about helping Q-Med AB in Uppsala to start its implementation of uncertainty of measurements analyses in their manufacturing department. Prior to this, the company relied solely on personal experience or did not take this uncertainty into consideration at all during different kind of measurements, which means that some of the processes that the company previously believed were within specified acceptance limits, will actually fail when considering these sources of uncertainties.Q-Med AB needed some sort of instruction to help the company, in a systematic way, to investigate different types of disorders that are affecting all kinds of measurements. This instruction includes a short summary about measurements and uncertainty of measurements in general and a detailed procedure about how these uncertainties are going to be handled in their daily work.The goal was to be able to use this instruction to systematically locate, eliminate (when possible) and analyze all kinds of disorders when measuring. Q-Med is using a lot of different types of instruments when measuring different types of quantities, including temperature, mass, pressure and density. This instruction will hereafter be used for every instrument, regardless of quantity and type of instrument.The instruction is tested through 4 different kinds of measurements, for mass, temperature and humidity.

This thesis is based on an assignment from a unit within an international group manufacturing industrial products. The purpose of the thesis is to analyze and suggest ways to improve the cost accounting system in use at the unit. The main source of empirical data has been interviews with employees. The theoretical framework is based on a comparison between traditional/standard costing and activity-based costing (ABC). The cost accounting system in use is described in detail and classified as a traditional/standard cost accounting system.

This rapport examines six Swedish workplace unions, in manufacturing internationalised companies, degree of internationalised trade union work. The report is based on interviews with local shop stewards. All local workplace unions were in some form internationalised. They were placed in three different groups of strategies: Passive, Tactical and Strategic. The Passive union only tried to get information; the Tactical unions were reactive against initiative from company management and used the channels provided of Industrial Relation laws.

Lean Production is used by many manufacturing companies. Companies in process industries do not use Lean Production to the same extent today. This is part of the report's issue to explore how Lean Production can be applied to a company in the process industries.The investigated company is a processing company that manufactures various types of foil. The company wishes to streamline its production and has therefore asked the authors to examine if Lean Production can offer the company improvements in their production. Lean Production value stream mapping tool has been selected to identify and analyze the current state of two of its products in production.

Background: A large number of companies works as a link between manufacturers and final users. These companies buys and stores goods to be able to deliver when a need comes up later in the chain. The storage could have a negative effect on profitability and therefore places great demands on the management control systems. ABC as a method has been used with some success in manufacturing for over ten years. In wholesale companies the method is not frequently used.

Syftet med denna uppsats är att se hur effektiva metoder och resurshantering påverkaroffentliga förvaltningar i Borås. Vi för även en diskussion om hur implementeringen avstyrmodeller såsom Lean har för inverkan på förvaltningarna. Uppsatsen har genomförts medutgångspunkt från valda teorier samt intervjuer med administratörer anställda på offentligaförvaltningar i Borås. Detta för att få ett medarbetarperspektiv på hur effektivitets- ochresurshanteringstänket har yttrat sig för de och deras arbetsplatser.De offentliga förvaltningarna som valt att införa styrmodeller såsom Lean i sina verksamheterhar blivit mer kostnadseffektiva och resurssnåla. En märkbar förändring är införandet av nyteknik i förvaltningarna.

Lars Höglund AB is one of Scandinavia?s most qualified manufacturers of sheet metal products and provides custom designed products of very detailed precision. One of the main methods of manufacturing is laser cutting. When Lars Höglund AB signed up a new customer, with high demands in tolerances for the products, Lars Höglund AB thought it would be necessary to know the capability of the laser cutting machine. Also the process of how to retrieve this capability was interesting. The capability will be researched for the following elements: Cutting right angles in squares with a corner radius of 1 mmCutting corners which are not right angleCutting of circles with constant radius Measurements were made on 150 pieces of sheet metal details, which had been cut out by the machine.  The data from the measurements where later used to study the capability.

This paper aims to determine what is decisive for localisation of production units when a company engages in offshoring. By performing a case study on Electrolux and comparing the results with theoretical literature we discuss the implications for manufacturing companies in general. To facilitate a structured analysis we have developed a model dividing the localisation decision into five perspectives and four geographical levels. We have found that the determinants of localisation vary depending on the geographical level of the decision process. Since all geographical levels are interconnected, the analysis needed for a decision on all levels simultaneously is very comprehensive.

Background: It has become important to be able to take advantage of employees' ideas for organizations today.  The contributed ideas can be developed into innovations. However, there are difficulties for businesses to take advantage and develop the employee provided ideas. It can lead to a stop in the organizations development.Purpose: The purpose of this paper is to gain a greater understanding of how organizations can take advantage of the employees' ideas and develop them into useful innovations for organizations.Method: The thesis consists of precipitated studies from the three organizations, a manufacturing company, a service company and the municipality of Karlskrona. The paper is based on qualitative research by collecting valuable insights through interviews.Conclusions: In this study, it has been proven that organizations today have a magnified view of the concept of innovation. They have difficulties in implementing the concept in day to day operations.

CSR - "Corporate Social Responsibility" is a concept that in recent years has become of bigger importance for companies. Even at McDonald's, which quickly grew into today's 217 restaurants, with up to 430 000 visitors daily. We have investigated how the McDonald's CSR work has evolved over time, how it looks today and what has influenced this development. Things that have influenced McDonald's and led to their CSR work proved to be scandals and changes in legislations. The PR value of working with CSR has also increased and a lot of the CSR work has shown to be economically viable.

In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

This report is about helping Q-Med AB in Uppsala to start its implementation of uncertainty of measurements analyses in their manufacturing department. Prior to this, the company relied solely on personal experience or did not take this uncertainty into consideration at all during different kind of measurements, which means that some of the processes that the company previously believed were within specified acceptance limits, will actually fail when considering these sources of uncertainties.Q-Med AB needed some sort of instruction to help the company, in a systematic way, to investigate different types of disorders that are affecting all kinds of measurements. This instruction includes a short summary about measurements and uncertainty of measurements in general and a detailed procedure about how these uncertainties are going to be handled in their daily work.The goal was to be able to use this instruction to systematically locate, eliminate (when possible) and analyze all kinds of disorders when measuring. Q-Med is using a lot of different types of instruments when measuring different types of quantities, including temperature, mass, pressure and density. This instruction will hereafter be used for every instrument, regardless of quantity and type of instrument.The instruction is tested through 4 different kinds of measurements, for mass, temperature and humidity.

LKAB is an international high tech mineral corporation and a world leading manufacturer of refined ironore products for steal manufacturing and other mineral products destined other industries. LKAB is an international corporation with companies world wide, with it?s main location in the north of Sweden, which is where the iron ore mines and the refining works are located. LKAB?s iron refining process in Vitåfors, Malmberget, is a source of great amounts of waste-rock.

The objective of this thesis was to present a design proposal on a modular mechanicalstructure for a nanosatellite. The size of the structure should follow the CubeSatstandards. This standard divides satellites in units (U), where 1U is equivalent to acube where sides measure 100 mm. 2U corresponds to the same volume and size as2 assembled 1U structures, and so on. The focus was to develop a structure in theorder of 3U and 6U.At the integration in the satellite launch rocket, there are a couple of differentinterfaces, where the structure is adapted to common ones; P-POD and CSD.

SECO Tools manufactures tool inserts for all types of metal cutting machining. (Ti,W)C is a common raw material used in the production. At arrival, the material (Ti,W)C is always analyzed. Titanium has previously been analysed with x-ray fluorescence spectrometry, but as the calibration has previously been performed with two different types of titanium (rutile and metallic titanium), the results has differed. Because of that, this thesis project has been devoted to analyze titanium, to find the best titanium compound for producing standards.The work has been performed using literature studies and many experiments in the laboratories at SECO Tools inFagersta,Sweden.