The government regulations for energy use in buildings will be tightened in the future. At the same time the interest in environmental classifications and certifications of buildings is increasing. This has meant a new situation for solar energy. The designs of solar heating systems are often based on experience and/or rules of thumb, rather than calculations and simulations. This thesis examines whether simulation tools, in this case Polysun, are useful in this work.

Long transport of products is an environmental issue discussed to an increasing extent. The consumers are increasingly aware of how far our comestibles really have been transported. The increasing levels of environmental emissions are something that concerns people. The question is nevertheless delicate and many choose to ignore it. This is no longer an option.

An Interoperable Fare Management system for public transport has been a struggle for the actors in industry of public transport. A lot of effort has been put into creating a smart card solution that enables the travellers to use the same card for paying and holding the ticket regardless geographical position in Sweden. That project has failed, mostly due to a lack of taking non-technical actors and aspects into consideration during the project process. This thesis highlights the major actors and their responsibilities. The ARKTRANS framework is used as analytical tool to identify different roles. Throughout the thesis a sociotechnical perspective is used. The developed method in this thesis is suitable for mapping of actors and responsibilities in a network surrounding a complex technical system.

Vertical hydropower units has a rotating mass of up to 1000 tons. For the generator and turbine to work well the rotating system is required to be centered in relation to the surrounding structure. This is achieved by means of radial bearings. The dynamic characteristics of these bearings have a strong impact on the overall rotational dynamics of the total system and thus influence the vibrations in the unit. At Vattenfall Research & Development in Älvkarleby ongoing research is taking place on how the bearing parameters should be represented in the rotor dynamic calculations.

The Library of Uppsala University has decided to change their classification system from the Swedish SAB system to the American Dewey Decimal Classification. One of the main reasons for this decison was that Kungliga biblioteket also has made an exchange between these systems. Due to that, the national bibliography of Sweden classifies Swedish documents according to Dewey Decimal Classification and the SAB system is no longer maintained. A transition to Dewey Decimal Classification will enable Swedish librarians to import foreign catalouge posts and classification codes and will provide them with a common standard between their libraries and other libraries due to the use of the same international classification system. It is disputed whether the Dewey Decimal Classification is equally suitable for all subjects.

This thesis was made possible by the company Verendus system AB, which is the leading developer of dealership management systems in the caravan and camper market. The goal of the thesis was to create a statistics module for a new producer system envisioned by Verendus. The new system is aimed at manufacturers and importers of caravans and campers, with the goal of enabling its users to create more effective production lines. By providing statistical data to mentioned users they will be able to predict market trends and customize their production lines accordingly. Today such software does not exist which leads Verendus to think that its arrival would lead to a success on the market.Before the development and design of the producer system began, a new agile method had to be developed, MAM (Minimum Agile Method).

The aim of this Master thesis has been to analyse the debateon Wikileaks as it occured in the Swedish daily press during2010 and early 2011, as well as to identify what differentdiscourses influenced the discussions. The empirical materialconsisted of fifty-three articles, taken from three nationalnewspapers and has been analysed using the discourseanalysis theory of Ernesto Laclau and Chantal Mouffe. Thearticles were analysed in four stages which included:identifying statements concerning Wikileaks and itsoperations; identifying additional groups and individualsappearing in the debate and the statements made about these;grouping statements into themes and on the basis of thesethemes construct chains of equivalence and identify subjectpositions. The last stage consisted of identification ofdiscourses and the relationships and possible conflictsbetween those discourses. The results showed that fourdiscourses could be identified: the good democracydiscourse, the traditional diplomatic discourse, the goodjournalism discourse and the power-critical discourse..

The study aims to examine how censorship and comics have been discussed in three debates. The aim is also to identify discourses and the orders and relations of power constructed in the debates, and to examine how librarians should handle debates about censorship and comics. Selected sources are articles from Swedish newspapers and tabloids about the debates on the Pox-trial, the manga case and the debate about Tintin in Kulturhuset. The results from the analysis indicates that the debates have been dominated by two main discourses: a discourse on freedom of speech and a discourse on social responsibility. Within the discourse of freedom of speech there is a range of perspectives that emphasize: artistic freedom, the need for open and free conversations, a discussion about how the comics are assessed in comparison with other media formats as well as a discussion about moral and moralism.

Denna rapport behandlar en prisjämförelse mellan fyra olika elsystem i fyra valda referensmiljöer. Uppdragsgivaren till detta projekt är företaget Arexor som har utvecklat en ellist som de ska släppa på marknaden under hösten och därför vill ha en prisbild på marknaden idag. De olika systemen är i huvuddel Thorsmans TEK-123, KB-systems DWP, Eubiqs PTS samt det traditionella sättet med kablar och VP-rör infällda i väggen. Även en presentation av projektets uppdragsgivare Arexor och deras ETS finns att läsa om. För att kunna utgå från en realistisk bakgrund är referensmiljöerna valda så att en standard kan sättas för utformningen.

Ett företag kan göra sina för- och efterkalkyler i MPS-systemet eller i ekonomisystemet. Hur den ekonomiska uppföljningen är fördelad mellan de olika systemen är helt upp till företaget med avseende på företagets olika behov och krav.Den centrala delen av detta examensarbete är de besöksintervjuer som genomförts på fyra utvalda företag. Dessa intervjuer ligger till grund för mitt resultat och analys. Utifrån det insamlade materialet har jag besvarat den frågeställning jag hade: Hur hantering med för- och efterkalkyler sköts samt hur ekonomisk uppföljning är fördelad mellan MPS-system och ekonomisystem.Det resultat och slutsatser som jag kommit fram till finns presenterat i denna rapport. Det visade sig att de undersökta företagen sköter arbetet med förkalkyler noggrant.

Arbetet är ett examensarbete i högskoleingenjörsutbildningen, inriktning datateknik, på Linnéuniversitet. Arcoma AB är ett företag i Växjö som utvecklar och tillverkar kompletta röntgensystem. Företaget har som mål att förbättra användarvänligheten av systemet med hjälp av en LED-display. De kan förbättra systemet genom att byta ut en enhet som styr röntgengeneratorn mot LED-displayen. Detta leder till att användaren får bättre kontroll och styrning av systemet, samtidigt som patienten behandlas.I rapporten beskrivs implementering av både hårdvara och mjukvara till displayen, samt den tekniska bakgrunden som till exempel HDMI och LED-tekniken.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

This master thesis is made of two parts. The first part concerns the method and results ofdesigning a motion control system for a piece of research-equipment called BIRGIT. Theequipment is made to be used for research on eyemovements. In the second part, a computermodel of a part of the balance organ in the inner-ear is developed. The work has been done atthe Bernadotte laboratory at S:t Erik Eye Hospital.The equipment the control system is made for is a so-called rotationchair.

This essay deals with the principle of surprise warfare and its development as well as the adaptation of military action that had to be made to surprise the opponent in the modern era.The concept of surprise is divided into its components in order to clarify what is required to implement a surprising maneuver, to understand the complex concept and form a theoretical framework for gathering facts in the case study.Development and adaption are demonstrated by a comparative case study where Pearl Harbor illustrates an example of historical surprise and Operation Desert Storm illustrates a modern surprise. The product will then be analyzed in order to detect the development and how military conduct is forced to adapt in order to carry out a surprising maneuver. The results shows that the military action of performing a surprise attack has had a major development and is now carried out in a different stage of the attack..

AbstractTitle: It?s not just a comment ? a study about Crisis Management on Social MediaAuthor: Malin Pettersson 910624 and Amanda White 920310Year: Spring 2014Level: Bachelor degreeDepartment: School of Business and EconomicsSupervisor: Carina HolmgrenExaminer: Frederic Bill Purpose: The purpose of this paper is to develop and test a theoretical model for Crisis Management on social media. Method: The overall literature that was found consisted of traditional Crisis Management and the communication that goes with it, and it was mainly written for traditional channels such as newspapers. The theories could not concretely describe how organizations should handle crisis in Social Media. Therefore, this study focuses on if and how organizations can use the traditional theories when working with crisis management in social media. Through a qualitative method the study has examined and tested the model on three crises, and subsequently improved the model based on the empirical material and  the analysis that was made. Conclusion: The conclusion found that organizations need to adjust their crisis management after following guidelines for it to work on social media:-    Strategies should be limited to only one, and be either a rebuilding strategy or a bolstering strategy.-    The focus should be on emotional communication, and regarding the rational aspects the focus should be on actual actions and plans for the future.-    Clear guidelines for what type of questions and critics that should be answered should be set.