This master thesis has been performed at the department of Machine Design at KTH, The Royal Institute of Technology. The thesis has been a part of a global development project in collaboration with Luleå University of Technology, Lund Faculty of Engineering and Stanford University. Corporate liaison and sponsor has been Immerse Global Inc. The project was also performed on sponsorship from the Product Innovation Engineering Program, PIEp. The thesis is a representation of some of the contributions made by the authors.The lack of clean drinking water is one of the key issues facing the world today.

This essay is about the planning of Stockholm's border regions (areas on the outskirts of the city) during the first seven years of the 21st century. It describes how planning decisions are made in reality, in respect to a 'green' perspective. By describing what a "markanvisning" is (the right to negotiate with the city about a certain piece of land) and by discussing examples of what has happened with a hundred applications for markanvisning, this essay shows how Stockholm's border regions are planned. In the majority of cases it is the initiative of the future developers that begin the planning and construction processes. Research shows that the application to get a markanvisning in Stockholm does not follow a clear, structured system. However, the existing system in Stockholm does work and it seems like almost all the employees within the municipality, the politicians, and the future proprietors are happy with the current situation. Interviews have been held with key individuals involved in the planning process.

In this project the focus has been on the system for recombination at Oskarshamn 2. The recombining systems have on several occasions switched paths due to low pressure before the last ejector that?s feeding the recombiner. Of the mentioned reason, events and several measuring points have been analyzed in this report since the installation of the recombining systems.In order to prove theories and demonstrate what may be the cause of this problem, we used heat balance calculations by the program Probera. Using the program, we can demonstrate that the catalytic process does not reach the desired temperature with the amount of combustible substance.

During this project a photographer and an illustrator have explored if a single image can communicate a bigger whole, in this case a movie. By analysing five motion pictures with visual communication theories, semiotics and colour symbolism as tools, ten images was created. These images do not only consist of symbols, but also communicate the overall feeling and colour scheme of the movie.These images have been tested in interviews with six individuals, who, except for one, work with visual communication of some kind. They have studied the communication skills of the images from their own experiences.The result of the interviews showed that all images could not communicate a movie. One reason for this was that only a few of the test persons had seen two of the selected movies.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

The aim of this study is to describe and analyze how the European union relates to the different dimensions of abortion. What kind of problem is abortion and whose right is it? Does difference framings of the problem enable different solutions?By analyzing debates from the European parliament through Carol Lee Bacchis method ?What?s the problem approach? I have come to see that different representations of a problem changes the problem it self. This emphasis that a problem is a problem in one context, but not in an other.Depending on the work of, among others, Barbara Hobson and Ailbhe Smyth I have focused upon the European union as a economical project, leaving social issues to national competence. This makes the EU a patriarchal project that fails to guarantee women?s rights.

This report describes an examination project made for the IT consultingcompany Sogeti. The purpose of the project was to develop and modify the translation tool Language Manager (LM) built by Sogeti to be used for translating applications. Employees at Sogeti considered some disadvantages with Language Manager, version 1.0 which among others was that language files for projects were saved at two locations. Partly in resource maps among with the source code of the applications and partly in a database. This was dual work for employees at Sogeti and it also caused redundancy inthe system.

In my degree project, I explore the importance of distance and how our perception of distance is affected by our experiences.During my investigatory work I studied the relation between distance and experiences. Among other things I concluded that distance can refer to several different kinds of distances (for example spatial, temporal or social distances) and that experiences are what you?ve learnt of these distances. The importance of distance can be illustrated by highlighting the effects of the distance, i.e. experiences.My degree project resulted in a pair of interactive binoculars which are used for looking at an virtual world of illustrations in 360°; a world of illustrations where distance and the importance of distance is shown..

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

Many enterprises have shortcomings in the transfer of information between different departments. Furthermore, routines for maintaining knowledge in order to be able to use this experience in the future are often lacking. Time and resources spent on improving these systems and procedures can provide significant benefits in terms of saved time and reduced costs in the later stages of a project. The benefit of this is not only a greater clarity and a reduced risk of misunderstandings, but also the preservation of knowledge that would otherwise be lost.The aim of this study has been to examine the process of information transfer and the transfer of knowledge between the calculus department and production manager in projects at Erlandsson Bygg i Öst AB. An additional aim was suggestions for improvements in the calculation handover and at the end of a project, where it was possible.The study was primarily conducted through literature studies and interviews.

This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

The thesis work of 15 credits has been performed to interest of Norrtälje ElektronikPartner AB (NEP) in Norrtälje. The aim of the thesis was to develop a prototype for an integrated digital multimeter, designed for one of NEP's proprietary test systems. A digital multimeter module according to NEP's requirement specification, such as physical size and accuracy should be constructed. The module should be able to measure current, voltage and resistance.The final circuit was based on the chosen analog to digital-converter, Maxim integrated´s Max134, which is the main component of the circuit for this instrument. A circuit diagram and PCB layout were made. The result of this project is a constructed DMM board.

Shear Strength and Deformation Characteristics of Uppsala Clay with CRS and Standard OedometerTyra Morell Bonin & Magdalena MählerTo see how much a clay compact under different pressure one can use several different methods and in this project, two methods were used, the Standard Oedometer and a CRS apparatus. A Standard Oedometer is a full-time manual device and the CRS apparatus is a modern electric and automatic device. The aim of the project was to see similarities and differences between the two methods and examine which method that were most reliable. This has been done with repeated laboratory tests and afterward evaluations. With this information one can get a picture of how the clay will behave and how it will deform in nature.