Purpose: Our purpose is to describe and understand how a project-based, knowledge-intensive firm in the high-technology industry creates and transfers knowledge, seen from two perspectives.Methodology: Our qualitative case study has an explorative approach since earlier studies within our positioning are absent, thus we look at KM abductively. To gain more depth to our study, we mirror our findings from our case company with data collected from three additional organisations.Theoretical perspectives: We see a clear distinction between researchers, either seeing knowledge as an object or a process. Thus, we review theories from both sides, either focusing on the creation or transferring of knowledge. In addition, theories on KM in project organisations areaccounted for.Empirical foundation: The study is based on the empirical foundation which consists of the data received through six interviews with employees at our main case company and, additionally, two interviews at each of our three mirrorcompanies.Conclusion: The study found KM being seen from both perspectives in all four firms. Through this, we found implications for how our case company could proceed in the future..

This study has been made on behalf of the Swedish Transport Administration to study the work of the department National Projects. The Swedish construction industry has for many years been characterized by low productivity. By being the largest purchaser of contracts in the industry the Swedish Transport Administration has a unique opportunity to influence the productivity. In order to improve in productivity The Swedish Transport Administration is adopting a new role in which they will order more turnkey projects. In our study, we will focus on how one department within the Swedish Transport Administration, National Projects, can perform successful turnkey projects.To clarify how the department National Projects can perform successful projects, this study identifies critical factors for projects and their links to different phases of the project.

Background Being outdoors on a regular basis is beneficial for all individuals, people with dementia who is living in special accommodation have not always that possibility. If the person with dementia live in a stimulating environment can contribute to the person's functions are maintained. Aim To provide a basis for evaluation of a new outdoor environment at a special accommodation for people with dementia. Method of data collection in action research was done through focus group with staff on the accommodation and the participants in the project, a total of five informants. Results Informants thoughts and experiences were analyzed and divided into three main categories to describe the project - design, obstacles and goals.

This report is the documentation of a project in the education Master of Science in Mechanical Engineering. The project was carried out at Alfakonsult AB. The purpose of the project was to map out the transference of information between the different operators in the supply chain of medicine in Sweden and to analyse this in order to reduce lead-time and the total throughputtime. The supply chain of medicine in Sweden consists of producers, distributors, one wholesaler, prescribers and patients. The mapping of the transference of information showed that most operators in the supply chain have done well introducing technical aids to facilitate the transference of information.

AbstractPain among patients in their final stage of life is a commonly occurring problem. Results fromthe Swedish Register of Palliative Care (SRPC) indicate that validated instruments forassessing pain are rarely used. Nurses' insufficient knowledge of pain and pain treatmentmethods may be a cause of maltreatment of patients who suffer from pain.The goal of this study was to determine whether training within the area of pain, painassessment and pain assessment instruments increases the use of validated pain assessmentinstruments utilized by nurses working in care homes for patients in the final stage of life inthe city of Uppsala.Method: A quantitative and quasi-experimental design was selected to perform the study.The intervention study that was used consisted of one training session where onequestionnaire was given before and one after the time of training. Register data were collectedfrom the SRPC given the question of pain assessment before and after the intervention.Results: The study showed that nurses more often used pain assessment instruments after thetraining session. The results also showed that nurses to a greater extent than before alternatedbetween the two validated pain assessment instruments that were introduced at the trainingsession.Conclusion: The results showed that when nurses at care homes are given training in the areaof pain and pain assessment they absorb and use the newly acquired knowledge in theirclinical work..

This thesis project is based on a business idea where users can design their own t-shirt online. The project shows the first step in the development process where a prototype for a user interface is created and evaluated.The purpose of this thesis project is to answer the following question:How does one develop a user interface for t-shirt design with consideration to interaction design theories?In order to answer this question the design process began with scheduling the work at hand. The first step was to build a conceptual model based on specifications made prior to this project. This conceptual model became the foundation for the physical design.A high fidelity prototype was created using Macromedia Flash and Actionscript 2.0.

The students have been assigned a task from Consid, were they are supposed to develop a web based platform for handling the company?s consult CV:s. The key features of the system are to simplify the administration part at mission procurements towards customers and to match qualified consultants to certain missions.Consid is an international it-consult company and have about 1000 consults working for them. When Consid makes mission procurements towards a customer they have to manually match the best consult against a certain mission, this is both time consuming and complicated.The students started the project with big visions and thoughts about how the work would be performed and how the system would be developed. After the initial meetings and the closer it came to the beginning of programming it became clear that the expectations were too big.

This degree project was conducted in collaboration with Gremo AB located in Ätran.The aim of the project was to develop a solution to secure quality and to help assemblingthe locknut holding the vertical hinge on the harvesters and foresters from Gremo.At this time the nut is assembled manually by the aid of an overhead crane. The nut istightened differently from time to time, and there was no specified torque to which it istightened. Another present problem was the locking washer which sometimes getsdamaged during assembly, when this happens the procedure has to be started over fromthe beginning. The current assembly procedure is very time consuming and lengthy forthe employees.Our task was to design a machine that could tighten the nut to a specified torque with amargin of error of ± 3%. The assembly procedure will be held simple and the timerequired at a minimum.The project started by developing several principle solutions, the one solution that bestmatched our specifications were developed to a primary solution.Today we have started manufacturing and assembling our prototype.

This term project addresses how to develop construction drawings for a general contract. The project contains supervision, including blue prints as support as needed.Apart from directions on how to carry out the actual work, the supervision also discusses regulations governing all construction drawings. The supervision is created as guide for similar projects.The construction drawings is a complete construction guide, hence it includes all construction drawings. In addition, a room description and a general description is included..

The work has been carried out in cooperation with the company Zenit Design in Malmö. The project's goal was to restore, improve and produce an ozone generator. During the project, the authors sought relevant literature in databases, been in contact with US suppliers of fuel cell membranes, Asian suppliers for the processing of Teflon and Titanium parts in mechanical engineering and Swedish suppliers of various standard components. The authors had access to a temporary lab at Zenit and electron microscope at Halmstad University where material tests were performed. The authors have also had access to measurement equipment to measure amounts of ozone.During the work, the authors have mapped how an existing ozone generator works and then have their own development.

The Hunter?s Bend project is about how our personal possessions affect our perceived identity and in what way the value of an object may increase with the relationship that is built up towards the user. I have looked upon traces of time as an extension of an existing object. The outcome is a series of leather cases made out of one piece of folded leather, hardened and locked within itself. The history contained in leather, as a living material has been an important part of the project as well as how its features are used in the making and then allowing the product to change after use..

In a world where digital media is becoming a greater part of people?s everyday and working lives it is plausible to assume that the upcoming generation of pupils expect the teaching media to adapt thereafter. It is this assumption of an increased demand that Natur & Kultur is hoping to be able to meet. This thesis has been a stage in the process of producing digital material in the subject of mathematics for high school students. Specifically the aims of this thesis have been to make a rough description of the largest competitive companies? products within the same market, explore and put together a brief theoretical foundation of contemporary research and produce concrete examples of ideas for digital applications.

The goal with the project was to make the graphic for Djungeltrumman.se´s upcomingwebb-TV. Djungeltrumman.se is a clubguide on the internet and as a magazine.Their target group is people in the age between 18-34 with an interest for culture and nightlife that lives in a city where Djungeltrumman.se is active. The purpose of the project was to make a graphical frame that had the feelling ofDjungeltrumman.se. The feeling should capture the interest of the target group and make them care more for Djungeltrumman.se.The graphics will contain an intro, information frames and presentations for the different parts in the program. In this project I focused on making the intro for the program.

3D modeling is a common tool in landscape architecture. Today, there have been new ways in which virtual 3D models are successful tools in the dialogue with the public. These new methods involve children and young people who are groups that is hard to reach and engage in citizen dialogues. The purpose of this work was to investigate how a virtual 3D model works in the landscape architect?s communication with the public through the project Gruvstadsparken in Kiruna. Through workshops, I wanted to communicate Gruvstadsparken to get ideas from participants on how the park can be used and be revisited.

This diploma work project is a product development project which purpose is to redesign a braking system for a walking frame. The system that was developed diverges the force from the user to braking power, and includes a service brake as well as a parking brake. The most important components of the system are a grip handle on where the user holds on to and a braking handle on which the user operates the brake from. The system also includes a power transmission component, braking package and other mechanical components. All of the components wasn?t developed in this project, several off them has been reused from the existing system.This product has been developed to meet the requirements and standards presented from the principal, Ahlberg Leber.