The project involves implementing a finished dispersion model into ArcGIS. The goal of the tool is to show how dangerous and toxic substances will travel in the ground after long periods. The goal of the project is to understand GIS in general, what it is used for and gain an insight into how developing tools for ArcGIS is, what challenges might exists. Understanding the type of data that can be stored and accessed in ArcGIS a long with the tools and functionality offered by the system when using Python as the main language for development. A prototype of the tool is created..

Edsbyverken Office Furniture has over the past 100 years been producing delicate carpentry products, chairs and skiis, but more recently the focus has shifted to furniture for the modern office environment. With a wide selection of products and its characteristic neutral design, Edsbyverken has an extensive group of clients both in Sweden and internationally. The aim of my C level thesis project was to examine the materials Edsbyverken is currently using in order to develop new designs or product functions. Simultanesously, I also wanted to verify whether the method I developed for this project - to initially undertake a comprehensive study of the chosen materials and thereafter specialise on a certain product and target audience ? was effective and successful.

This thesis is a feasibility study for a future product development project. The purpose ofthis project is to evaluate the possibilities and difficulties associated with the design of anelectric power assist servo for all terrain vehicles (ATVs). The project has been carriedout in collaboration with Nira Control AB. Nira designs and manufactures electric andelectro mechanic products mainly for the motor sport market segment.Nira Control AB is developing a fuel injection system for a new line of large ATVs oncommission. To be able to compete with manufacturers like Yamaha and Honda thecommissioner should be able to offer optional power assist steering.

At the Department of Technology and Built environment at the University of Gävle there was an interest to study GNU Radio, which is an "open source radio project. The project is based on that most of the radio signal processing is made in an ordinary PC. The idea behind this degree project was that in a laptop there are several radio transmitters/receivers that takes space, generates heat and transmit in varied frequency band etcetera. All these radio transmitters/receivers could be replaced with a Software Defined Radio system. It means that one common, general radio hardware is used to different communications such as: WLAN, Bluetooth, GPRS, 3G etcetera. The waveform is generated in the software, which makes the system very flexible.

Compared to all existing ethnic groups in Sweden, the integration of Somali women has failed the most within the aspect of employment. This bachelor?s thesis investigates the obstacles in the integration of Somali women by focusing on one case, a project named ?Kvinnokraft?, partly financed by the European Socialfund.By interviewing eight key actors, opinions about obstacles in the project have been identified. A theoretical framework that incorporates integration, project research, multi-level governance and intersectionality contributes to explaining difficulties in integrating Somali women.The empirical findings show that there are individual, social and institutional holdbacks. Stereotypical perceptions were common amongst officials, which contributes to a creation of an inferior position in the structures of the society for Somali women.

We got in contact with Marco AB, who we?ve had contact with before concerning earlier projects, to find out if they were interested in arranging a larger project for our last class (Examensarbete 15hp). They were very positive to this proposition, and soon they offered us a project regarding reconstruction of their current mechanical device that absorbs all the force from the lift itself when it is at a predefined level (sv. sjunkspärr). The current solution does fulfill the requirements that are given, however it is not a solution that gives a high level of satisfactory.

This thesis intends to examine the role of the city, Dublin, in the Irish economic growth during the 1990s. It is a case study where Dublin is compared with current theories on post modern cities as growth machines and increasingly prominent actors in the global context. The study has an interdisciplinary approach but focuses on political science issues such as power distribution, global-local governance and local political organisation. It is a theory driven study that also intends to add aspects to the understanding of the cities of our time. I argue that Dublin has faced a lot of changes during the last decades in accordance with the post modern city.

SECO Tools manufactures tool inserts for all types of metal cutting machining. (Ti,W)C is a common raw material used in the production. At arrival, the material (Ti,W)C is always analyzed. Titanium has previously been analysed with x-ray fluorescence spectrometry, but as the calibration has previously been performed with two different types of titanium (rutile and metallic titanium), the results has differed. Because of that, this thesis project has been devoted to analyze titanium, to find the best titanium compound for producing standards.The work has been performed using literature studies and many experiments in the laboratories at SECO Tools inFagersta,Sweden.

This has been a thesis work for an bachelor degree at Umeå university. The work has been done at LKAB?s facilities in Kiruna and its main purpose has been to investigate and construct some conceptual designs for replacing a screen with magnetic separation in KA3 concentrator plant. First all information available about magnetic separation was gathered and studies of magnetic separation at the sorting plant and studies of the plant KA3 was conducted. Companies that manufacture magnetic separators were contacted.

This paper discusses sound education within school subjects such as music, science, engineering, computer science, and Swedish to classes at the intermediate stage..

This examination project is an investigation about the opinion and comprehension for political engagement of four young municipal politicians. The purpose with this project is to describe and understand the pronounced comprehension for political engagement. There is also an intention to investigate the educational in discussing political engagement with students in social studies at upper secondary school. The method that has been used is ?map of conceptions? because of its appropriate way to elucidate the comprehension and understanding of a certain subject. Those four young municipal politicians see political engagement as the will to improve the community. There is also an importance to have a large engagement in more areas than just one.

Typically, when Faurecia in Torsås are planning a new assembly line, one of the steps is to build a full-scale model of the line in card board, a form of mock-up planning. Faurecia has shown interest in finding an alternative methodology. The purpose was to explore the possibility of replacing today's cardboard based mock-up planning with models in a digital simulation environment.The purpose of the thesis has been to answer some of these complex questions; What are the benefits of using a simulation tool? In what way can we use it? If we choose to use a simulation tool, in what way does it affect our way of planning an assembly line? What are the advantages and disadvantages? Are there any economical and social aspects?Our results made us realize that a digital simulation tool does not replace the card board. On the other hand simulation could be used as a complement.

During the period of this project I have programed a web site in php4, and also built the database in MySQL. The purpose with the projekt is to create a common web site for the various activities in the different churches located in the area of Örnsköldsvik. In my project I have chosen to try to find a structure of programming that fits my needs as a dyslexic. In the essay you can find a more thorough description of my procedure and the structure that I have chosen to use. .

ABSTRACTThe purpose of our study was to examine how four different organizations cooperate on rehabilitation of people to get them back to employment. More specifically our aim was to investigate how different organizations in a project, involving workrehabilitation, looks at cooperation. Our main questions were vague at the beginning of our study, but finally our focus became clear. The questions were formed with help from the research of Hjortsjö (2006) and Fridolf (2000): Which possibilities and hindrances identify the different organizations which cooperate? What does cooperation mean to the representatives from the different organizations which are included in KARB? Our result shows that the respondents mostly think positive of the project KARB.

As my final project I planned to animate a movie. Usually I work with illustration and I see animation as the next step in my design work, to investigate how illustration and movement can collaborate. The purpose with my project was to develop my technical skills, improve my design process and broaden my work to eventually be able to work with animation. My ambition was to make an abstract animation and my focus was mainly on my personal process and knowledge. I also wanted to explore how much one can abstract a movie while still communicating a story or message..