The purpose with this thesis was to examine the cold rolling mill located at Högskolan Dalarna and to Stabilize the rolling process, to achieve steady state. Experiments with cold rolling of an aluminium strip have given results for rolling force, friction, reduction, strip tension and strain hardening. Results show that steady state has been found for the experiments with roll force and strain hardening, and not been found for the experiments with friction and reduction. Results show that increased strip tension gives lower roll forces. The roll force equation of Stone shows comparable results with reality for dry contact with reductions up to 30 %, but starts being incomparable with higher reductions.

The project contains a force analysis of the vertical axis wind turbine Lucia's supporting arms and a measuring device to experimentally measure the forces is made. The forces between the supporting arms and the tower are calculated theoretically and then simulated by a computere. A measuring devise is then designed to measure the forces experimentally. The forces acting on the attachment between the supporting arms and the tower is primarily the centripetal force, gravitational force and the aerodynamic forces on the rotor wings. The maximum forces were theoretically calculated and is 13.38 kN along the x-axis, -0.25 kN along the y-axis and then 0.5 kN along the z-axis.

Background:Chronic heart failure (CHF) is a complex clinical condition. The higher survival rate after heart attack and other heart diseases, plus aging population, has led to more CHF patients. Symptoms can have negative impact on exercise capacity, ability to perform activities of daily living and quality of life. Heart failure clinics have been established to help better quality of life. Helping to Stabilize and maintain patients´ health can reduce the need of hospital admission.

It is imperative to provide more information regarding changed conditions resulting landslide events in a future climate. The aim of this thesis is to assess landslide susceptibility in Huddinge Municipality in middle Sweden. The main purpose is to produce a map, to visualize landslide susceptible areas, and to integrate the result with changes in physical factors such as climate change. Also, the thesis aims to analyze anthropogenic factors such as changes in land use and an increasing population in Huddinge Municipality. Methods used are GIS-analyses, interviews with staff of Huddinge Municipality, and field observations.

When exposed to them, isocyanates can induce serious injuries in the respiratory tract and irritation on the skin and in the eyes. They are therefore interesting from the point of view of occupational health. The purpose of this thesis was to collect isocyanates in air with impinger-filter samplers and solvent free samplers. Furthermore the isocyanates were to be analyzed with liquid chromatography-mass spectrometry. The solvent free sampler consists of a polypropylene tube and filter holder fitted with glass fiber filters impregnated with derivatization reagent, coupled with a pump.

AbstractThis bachelor thesis has been assigned by the company ACG Nyström, Borås. ACG Nyström is working in cooperation with a Swiss company named Jentschmann AG. Jentschmann is a manufacturer of ultra sonic welding machines which ACG Nyström is marketing in Scandinavia and the Baltic States. On behalf of Jentschmann AG the company has the aim to introduce the ultra sonic welding technique to new companies.The aim of this thesis is to compare traditional sewing machines with ultra sonic welding machines within two textile areas, protective clothing and outdoor living.Two investigative questions have been formulated for this purpose: what are the differences between a sewing machine and an ultra sonic welding machine? Is it possible to replace the sewing technology with ultra sonic welding? These stand as guidance for this paper.To gather knowledge interviews, literature studies, and tests on two different ultra sonic welding machines were performed.

The purpose of the thesis has been to explore the use of hedge fund styles when constructing portfolios of hedge funds (i.e. funds of hedge funds). The central question is if the use of hedge fund styles can significantly explain and improve risk adjusted returns (characterized by Sharpe ratios). The study has been done in collaboration with Optimized Portfolio Management AB who desire further knowledge and evaluation of hedge fund styles for their fund of hedge funds.To be able to create successful ex ante portfolios we have explored various prediction models for both risk and return. Our findings indicate that return prediction is problematic using simple models such as regression since the risk exposure of the indices appear to change significantly over time.

A detailed dam safety evaluation (in Sweden called FDU) was performed in 2009 by WSP where stability control was performed for Långströmmen power plant with associated spillways. This evaluation concluded that stability could not be ensured, and risk of sliding occurred. The evaluation is based entirely on the recommendations outlined in RIDAS, the power companies guidelines for dam safety, and it is clear that extensive renovations are necessary to Stabilize the dam.In this work, the stability will also be checked with guidance through new proposals on guidelines for concrete dams sliding stability, ELFORSK?s report 08:59. This report considered the guidelines in RIDAS as oversimplified, both from an international perspective, but also with regard to the current state of knowledge regarding dam safety.

In recent years, Lean has been implemented in a variety of companies with focus areas that differ from the conditions that characterizes manufacturing. This transfer has contributed to fairly superficial results because companies almost exclusively focus on Toyotas methodology and not on the goal of Lean. The effort of transforming Lean from manufacturing to any organization requires a definition on a general level and a view of Lean as a system. One of the core principles of Lean and the foundation of continuous improvements is standardized work. In product development there is a negative view on standardized work, where the engineers state that the principle is not applicable for knowledge processes that include non-repetitive and creative work.In the framework of this master thesis literature has been studied to find support that standardized work is applicable for product development and areas that include knowledge processes.

This is a critical discourse analysis of the conformation of the conflict in Goma, Democratic Republic of the Congo, as constructed by Ekot, a news-show on Radio Sweden. The ambition of this bachelor thesis is to examine the production of a Congolese conflict for a Swedish audience and to find out how the construction differences with and without a reporter in the field. To obtain this purpose the narrative is studied as well as the use of voices that define the conflict. The construction of proximity between Swedish audience and the Congolese event and the meaning of sound to Stabilize the formation of discourse within foreign news is examined as well. To conform and explain foreign news it must be put in relation to a starting point.

Mine waste from Ljusnarsbergsfältet in Kopparberg, Sweden, is considered to constitute a great risk for human health and the surrounding environment. Some of the waste rock consists of sulphide minerals. When sulphide minerals come into contact with dissolved oxygen and precipitation, oxidation may occur resulting in acid mine drainage (AMD) and the release of heavy metals. The purpose of this study has been to characterise the waste material and try to chemically Stabilize the waste rock with a mixture of sewage sludge and calcium carbonate. The drawback of using organic matter is the risk that dissolved organic matter can act as a complexing agent for heavy metals and in this way increase their mobility.

Chemical stabilization of mine waste from Ljusnarsbergsfältet with sewage sludge and calcium carbonate residuesMine waste from Ljusnarsbergsfältet in Kopparberg, Sweden, is considered to constitute a great risk for human health and the surrounding environment. Some of the waste rock consists of sulphide minerals. When sulphide minerals come into contact with dissolvedoxygen and precipitation, oxidation may occur resulting in acid mine drainage (AMD) and the release of heavy metals. The purpose of this study has been to characterise the waste material and try to chemically Stabilize the waste rock with a mixture of sewage sludge and calcium carbonate. The drawback of using organic matter is the risk that dissolved organic matter can act as complexing agents for heavy metals and in this way increase their mobility.

The requirements of good quality and appetizing fast food increases continuously as a consequence of a community where food is always available. The crispiness of French fries is an issue that must be considered in this context, since it tends to decrease and give the fries a soft surface not appreciated by the consumer. To prolong the crispiness, the fries can be coated by a batter, a mix of starches. The batters used often consists of modified starches, e.g. cross-linked, acetylated and dextrinizated to increase and prolong crispiness, flour to Stabilize the batter and sodium bicarbonate to make the batter ?rise?.The cross-linked starch keeps the granules in a swelled state and prevents them from breaking when exposed to heat or processing: therefore, it delays the gelatinization and decreases the stickiness of the batter.

Concentration of protein in bovine milk is one of the most significant milk quality parameters, to a large extent determining the price for milk to the producer. Mastitis is a common disease among dairy cows, negatively affecting not only milk yield but also milk protein composition. Milk from mastitic cows tends to have lower cheese yield, negatively affected processability properties and sensory quality, due to changed protein quality and composition. Poorer milk protein quality would have an economically negative impact on dairy industry. Only few studies have investigated the short term effects of mastitis on milk protein composition.