The reason for performing an Environmental Impact Assessment (EIA) is to incorporate environmental concern in different kinds of plans and projects. The purpose of such an assessment is to identify and describe direct, indirect and cumulative environmental impacts.Geographical Information System (GIS) is a tool that can be used to combine spatial extension of both sensitive areas and different environmental impacts in a quick and easy way. Because of that, descriptions of environmental impacts and motivation of different standpoints on a specific issue can be more correct and easier to make if GIS is used as a tool.Hence, GIS can contribute to improve the quality of Environmental Impact Assessments. If the benefits of using GIS are to out weight the costs, geographical information of satisfactory detail, actuality and accuracy need to be available at reasonable prices.In this paper, case studies are carried out for three different geographical analyses to investigate the use of GIS as a tool in EIA. From these case studies, more general conclusions about the benefits and limitations of using GIS for Environmental Impact Assessments are also drawn.

At the beginning of 2011, Sweden started using the European rules for structural design, the Eurocodes, instead of the previous national rules. In both the previous rules and the Eurocodes, it is possible to dimension concrete columns using tabled values. However, the required cross section measurements have increased considerably. Moreover, it is possible to dimension concrete columns using calculations, however, this is unusual.The development of a fire in a fire cell can be divided into the growth stage, the fully developed fire and the cooling phase. The duration of each phase, as well as the temperature, is dependent on a number of factors, e.g.

This study was made in an attempt to give the forest research centre Mógilsá a producedtetratherm map and a better understanding of how topography and temperature influencethe growth of two tree species. The digital tetratherm map model, covering the northernpart of Iceland, was developed to investigate the correlation between tetratherm and thegrowth of Picea sitchensis and Larix (sukaczewii + sibirica). The study confirms theusefulness of digital terrain models in providing data for a lot of different factors and forthe tetratherm model. Hopefully will this tetratherm map be used in future studies.Secondly, investigations were made correlating the growth of the two species againsttopographic factors representing height above sea level, distance to the sea, slope andtopex. Thirdly, investigations were made comparing the aspect and the ground shape tothe growth.The growth rate of Larix had strong significant correlations to the tetratherm and thedistance to the sea- factors.

The task of making a correct application for B- activities is the foundry time consuming task. Information and facts concerning your entire business activity shall be attached into a description of environmental consequences, which will be the basis for the decision making whether the activities shall be granted a permission to practise environmentally hazardous actions or not. When the Environmental Act were established 1999, the permission process became more extensor. With this study I want to give an insight about how these applications are made. The methods I have used to collect information are a study literature where the Environmental Act has been the focus, and qualitative interviews with two County Administrative Board. I used the Environmental Act to understand why permission is needed and the interviews to give me insight in how the work is done. My conclusion is that it is very unusual that an application is granted without complements.

In early January 2010 the authors participated in a meeting with the chief engineer for a company in which a central part is manufacturing of printed circuit boards (PCB). At this meeting it emerged that the machinery and production methods have changed substantially since the early 1990's. The spreadsheet for preliminary production time calculations by the company is today based on conditions from almost 20 years ago. The company has over the years been trying to adjust the spreadsheet template. The result of these adjustments has filled it with historical residue, something which makes the template difficult and time consuming when the primary user tries to handle it.The purpose of this study was to help the company increase its accuracy in the representation of the production times for the different PCB-based products by developing a new costing model based on an already existing but inadequate spreadsheet template. The company also expressed the wish that the new costing model would be less time consuming to work with.The methods used to achieve the goal are interviewing, participatory observations and meetings with relevant persons. The data obtained were analyzed using the theory on PCB production and visualization of data.

The student project Elba at KTH started in 2011 and is a project where a battery driven prototype car is developed. The vehicle competes in Eco Shell Marathon in Rotterdam, Holland. In this competition the vehicle that travels a certain distance including several starts and stops with the lowest energy consumption wins. To minimize the consumption is therefore very important, which requires knowledge of the vehicles energy losses.A vehicle's energy losses depends on several factors and can be divided into the powertrain efficiency and the driving resistance. The driving resistance can then be divided in to rolling and air resistance, if smaller losses like vibrations are ignored.

Phosphorus is the single most potent contributor to eutrophication of freshwater and has also been shown to contribute to the toxic algae blooms in the Baltic sea. The dynamics and paths of losses of phosphorus from arable lands are not fully understood. It is known that phosphorus can be lost directly from plant material to water. In studies where plant material has been subjected to several freeze-thaw cycles, large amounts of phosphorus have been lost. Most studies have been conducted under field conditions, with many factors effecting the measured losses of phosphorus, such as weather and type of soil. This study was performed in a controlled environment without the presence of soil. Instead of soil, small glass beads were mixed with the plant materials in vessels, to make possible homogeneous leaching with water through the mixture of glass beads and plant materials. In this study, clover, ryegrass and dry straw were cut to pieces, approximately 2 cm long.

Background and problem: The financial crisis 2008-2009 came out from an over-optimism among those who took the real estate loans in the U.S., and especially so-called subprime loans. After the 2008 financial crisis, it has become a global uncertainty in the financial market with low growth, and even financial crises in the euro countries have appeared. The real estate industry is a capital-intensive industry where companies have a high leverage to implement their investment. This means they have a larger proportion of debt relative to equity than companies in other industries. As investments require a lot of capital, real estate companies become dependent on having a working relationship with both the banks and the capital market.

This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

European Union has made a new decision that all new built houses by 2020 shallbe near-zero energy houses. Boverket?s definition of near-zero energy housesintends buildings with good energy performance in which a proportion of theamount of energy that must be added to the building is made of renewable energy.Passive House is a set of requirements from FEBY designed to build energyefficient buildings. This is achieved by reducing loss of heat through the buildingenvelope and to take advantage of the passive heat from solar radiation,installation and heat sources like people living in the house.This project has been made with help of Anebyhus and one of their model houseshave been examined from the report?s issues, including Anebyhus?s energyperformance, requirements for the manufacturing and assembly, how theenvelope must be improved to fulfill the requirements for the Passive House andwhat energy calculation programs are available on the market.The report aims to provide solutions for energy efficient houses that are adaptedfor production of house building.Two visits to Anebyhus has been done to study their manufacture and assemblyof building elements.

The purposes of this study were to estimate genetic and phenotypic parameters for conformation traits in Swedish Ardenner, a heavy draught horse, and to investigate the inbreeding status of the population. Additionally, a breeding scheme proposal was created, based on the results achieved in the study. The data studied were obtained from the Swedish Horse Board and from the Swedish Ardenner Association. The data included 1632 three-year-old horses, mainly mares, and 356 stallions, judged between 1986 and 2005 at conformation shows. The traits studied were type, head-neck-body, legs, walk and trot at hand, total score and height at withers.

The aim of this study was to investigate and analyze similarities and differences in trials and punishment from a gender perspective, during the inquisition in the episcopate of Linköping. A inquisition initiated by duke Karl but performed by archbishop Abraham Angermannus in the year 1596.During the working process a quantitive method was used in the purpose of getting statistic data considering number of men and women that were trialed and punished. A hermeneutic qualitive method was also used in the purpose of closer investigating certain cases that men and women were involved in. The theoretical concepts that have been of importance and used in this study are the individual and the female subject that is based on gender in judicial procedures.The results showed that 49 % of the men were trialed for quarrel. Not as many men were trialed for contempt towards the church and witchery.The most frequently used corporal punishment in this cases were flogging that were executed for totally 38 % of the men.The investigation also proved that men were punished with these forms of corporal punishments for showing their contempt towards the church.

This study was made as a part of a feasibility study on a polishing wetland at Rimbo wastewater plant (wwp) in Norrtälje municipality. The wwp had to decrease the nitrogen discharge to reach the limit 15 mg tot-N/l. The nitrogen in the outlet was mainly in the form of nitrate, hence the wetland mainly ought to support denitrification. The proposed area for the wetland was situated right next to the wwp and was already in the municipalitys posession. One aim of this study was to examine what spieces of plants needed to achieve highest possible denitrification.

The aim of this study was to compare activity, lying down and getting up behaviour, weight gain and cleanliness in heifers in cubicles versus on deep-litter. The study was conducted from autumn of 2005 until autumn of 2006 in a commercial organic dairy herd with 340 cows. In 2005 the farm rebuilt half of the young stock accommodation from deep-litter pens to cubicles. The experiment used 150 heifers of the breeds Swedish Red, Swedish Holstein and crossbreeds between these, all born on the farm. The animals were divided into three blocks based on breed and within each block they were sorted after increasing age. The youngest heifer in each block was randomly allocated to one of two groups, cubicle or deep-litter pen.

Field balances based on supply and removal of trace elements from the topsoil have been calculatedfor farms specialized in crop, dairy and pig production in Sweden. Today's field balances have beencompared with the field balances of 1990 in order to examine if, and then how, the situation haschanged. Studied trace elements are arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu),mercury (Hg), manganese (Mn), nickel (Ni), lead (Pb) and zinc (Zn).The balance calculations show that the stores of Cu and Zn are depleted with an average rate of -15% and -6 % over a 100-years period on crop farms when only commercial fertilizers are being used.The concentrations of Hg and Pb tend to increase in the topsoil on crop farms with more than 3 % forHg and with 2 % for Pb in 100 years. There is today balance between supply and removal of the traceelements As, Cd, Cr, Mn and Ni. In the south of Sweden, on crop farms with sugar beets in the croprotation, one can see a decrease in the concentration of Cd in the top soil by -6 % over a period of100 years.