The thesis mission is to investigate whether the swiveling laser that Vectura (former Vägverket Konsult) has in use to measure the road areas and straddle measuring can be used to detect differences in the reflective road markings function. This is to increase use of the swiveling laser and get rid of the manual measurements performed today.Currently, the measurement of road markings reflective function is performed with both mobile and handheld measuring instruments. The purpose of this thesis is to develop better methods for determination of road markings? reflective function, in order to facilitate the description and suggestions for improvements of the maintenance of road markings reflective function.The questions that the thesis has been to start with are:Can the swiveling laser detect differences in longitudinal and transverse road markings reflective function?The accuracy of measurement has been sweeping the laser over the reference instrument (LTL-2000)Is it necessary with a conversion factor for swiveling laser data against the reference instrument data?To answer the question 2 and 3, there has been a field work in Värnamo where a road stretch with longitudinal road markings and zebra crossing (transverse road markings) has been investigated with a swiveling laser and LTL-2000.The formulas and calculations contained in the thesis are drawn from scientific reports that are produced by VTI in Linköping. The same formula that was used to calculate the optical measurement data was also used for the swiveling laser data.

In June 2006 the Swedish government decided that the use of energy in buildings should be reduced by 20 percent until 2020, compared to the level of energy used in 1995. To contribute to this goal, the real estate company ?Eskilstuna Kommunfastigheter AB?, set up own goals for their buildings. In 2009, the goal for schools was to have a maximum energy use of 118 kWh/m2year for heating and hot water.The school ?Hållsta skola?, just south of Eskilstuna, exceeds the limit since it used 270 kWh in 2008.

When designing roads it?s important to knowwhat loads will bedriven on it. The axles on heavy vehicles can either have super single tires ordual tires which, according to studies, damage the roads differently. The SwedishTransport Administration is developing an understanding for the character ofthese different kinds of axle and tire types on the loads induced on Swedishroads. In this thesis a field study was conducted to determine the distributionbetween axles with super single tires and axles with dual tires on heavy vehicles.A highway, a country road and a national road were investigated during thestudy.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

For the company to work well, it is necessary with a good economy, a high qualitative production and a well working system concerning the environment: the whole cycle on the farm needs to be working. At the same time, debaters about the environmental impacts are also requiring higher demands for the dairy farmers and therefore also the management programs. Management programs for feed evaluation calculations have been more developed over the years. Big amounts have been invested in the new feeding system with NorFor, but no one seems to have asked the dairy farmers what they themselves want to spend their money on, and what they need help with. For the dairy farmers it is necessary that the whole company is controlled in the right way, and much more than just feed evaluation is included in this.

Hallstaviks papermill is an industry plant within Holmen Paper. Hallstavik is a mechanical mill and produce newspaper and journal paper. During year 2000, Hallstavik used approximate 1.200 m3f spruce, either as logs or chips from sawmills. Due to that the production is running continuously the mill also needs raw material at the same rate. At some periods the supply of raw material cannot keep up pace.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

This bachelor essay is divided into two parts, the first being a construction of a single-familyhouse and the second an in-depth study of five different isolation materials, analysed from anenergy perspective.The first part, the construction of the single-family house, has been created from knowledgeacquired during three years of studying at KTH Royal institute of Technology in Stockholm, inthe program Architecture and the Built Environment. The constructed house is a one-floorhouse of 137m2with façade plaster, situated in Borlänge, Sweden. The house has a wooden framewhich is built on a on sight cast concrete foundation, on the ground. The house?s roof is a gableroof, which has an angle of 24 degrees.

Sweden's drinking water quality is considered to be high partly due to a high quality of the raw water and a well developed sewage infrastructure. Despite this, there is water contamination that could be prevented by installation of a sophisticated early warning system. Some of the major players in the production of drinking water have already invested in different types of early warning systems to ensure drinking water of high quality. There are various forms of early warning systems where automatic monitoring of E. Coli is an interesting alternative.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

The borehole heat exchangers of today suffer from poor thermal and hydrodynamic performance. The purpose of this thesis is to improve the performance of ground source heat pump systems and thermal energy storages by increasing the energy efficiency of the borehole heat exchangers. For this reason, the annular coaxial borehole heat exchanger (CBHE) has been analyzed. This type of heat exchanger is interesting in terms of both thermal and hydrodynamic performance. A model has been set up in the program Comsol Multiphysics in order to investigate the heat transfer characteristics along the borehole.

This thesis has been a part of Forsmarks Kraftgrupp AB's evaluation of a turbulencemodel used in simulation of turbulent flow called PRNS (Partially Resolved NumericalSimulation). This model has promising properties and may be of use in savingcomputational resources. The purpose of this thesis was to analyze this model andcompare it with industrially applied models such as k-omega SST and LES (Large EddySimulations).PRNS works as a hybrid of the k-omega SST and DNS (Direct Numerical Simulation)where a constant, RCP (Resolution Control Parameter) with a value between 0 and 1are selected. This constant is then used in the calculations and determines thebehavior of the simulation. When RCP is set to zero the equation are the same as fora DNS simulation and when RCP is set to one the equations for k-omega SST issolved.

AbstractIntroduction: It has during the latest years occurred several large business scandals both abroad and in Sweden where auditors have been involved. The need for stabile conditions and well functioning professional codes of ethics for companies, especially auditing firms have been growing during the latest years. FAR has seen it as their task to define the meaning of the Swedish term ?god revisorssed?. This is specified through FAR?s nine professional codes of ethics, which came out in a new edition in 2003.

AbstractWork to develop the Eurocodes started in 1975 by the European Commission adopted a program to eliminate trade barriers within the construction area. The goal was to create common European design standards that would replace the member countries' own rules. Eurocodes will replace The National Board of Housing Building and Planning, National Rail, The National Road Administration and other agencies' calculation rules for the buildings structures. The transition to the use of Eurocodes looks like this:Eurocodes set to Swedish standards  between 2002 ? 2007They can be used parallel with national standards 2006 - 2009 The total transition is at the end of 2010/2011.Right now is going on a lot of work for replacement of the existing standards to Eurocodes.  The transition to the new calculations` standards, many construction companies and consulting firms facing a big changes and competitions.