The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.

Begreppen upprorsbekämpning eller counterinsurgency (COIN) ochstabiliseringsoperationer utgör ett debatterat ämne i den dagsaktuella militärteorin. Bådabegreppen förefaller användas för en och samma typ av operation. Erfarenheter från Irakoch Afghanistan har inneburit att USA utvecklat en specifik doktrin för counterinsurgency(FM 3-24) respektive stability operations (FM 3-07). Detta indikerar att det föreligger enskillnad i de två begreppen.Syftet med uppsatsen är att undersöka och definiera skillnader i begreppen COIN(upprorsbekämpning) och stabiliseringsoperationer. Medlet för att nå syftet utgörs av enjämförande studie av amerikanska doktriner.

Optimizing energy systems is, in Sweden, as in many other countries, of growing interest. District heating systems are no exception. In 2012, 285 out of 290 municipals in Sweden had district heating in use and the majority of these systems have a higher return temperature than that which is possible with an error-free substation of day current technology. To, when possible, lower the return temperature is a way of increasing the effectiveness of the district heating system.This study means to investigate, through simulations and calculations, how big of a reduction in production cost a lower temperature in the city of Ystad?s district heating system would correspond to.

This master thesis reviews advances in detection and diagnosis of static friction (stiction) in control valves. Control valves suffering from stiction results in oscillating control loops which in turn decreases both the process stability and reliability. Perstorp AB sees a necessity to automatically detect stiction in valves before the effects of the malfunctioning valves have become too severe. This thesis presents an introduction to maintenance, control loops and how stiction in valves can affect performance of control loops.A selection of methods presented in the literature are introduced and examined using normal operating data from the site in Perstorp. Common for all selected methods is their intuitive ideas and that they are based on normal operating data and minimum amount of process knowledge.

Cooling down the indoor air can be done in several ways. One way is desiccantcooling which will be used at the Stockholm Arena. This method is used in airhandling units that use temperature changes and moisture fluctuations in the air. Oneof the steps is to add heat during the cooling process in order to reduce the relativehumidity of the exhaust air. The air passes thru an adsorptions rotor which thenabsorbs moisture from the supply air.

Increased resource efficiency in an energy system could result in large economic and environmental benefits. Tekniska verken i Linköping AB (Tekniska verken) is responsible for the district heating network in Linköping. Their vision is to create the world?s most resource efficient region. An important step towards this vision is more efficient usage of produced heat, something which could be achieved through integration of a seasonal heat storage in the energy system.

The focus of this thesis is on what is considered to be a suitable foster home. For the study to be carried out an application had to be made to get access to the foster home assessments in a medium-sized municipality in Sweden. With the support of attachment theory and theory of standards different categories have been picked out and analyzed in foster home assessements that have been approved. The conclusion to what is considered to be a suitable foster home is a complex issue, as there are many factors that are interacting. Social workers seem to focus on the importance of a family?s ability to provide some kind of stability and security for a child who is considered to be placed within their home.

AbstractWhy don't (some) regimes with formal democratic features undergo transition to democracy? Which are the internal dynamics of these regimes that can offer comprehension to this state of affairs? The main purpose of this thesis is to advance the above questions, and, on a lower level of abstraction, examine the case of Egypt. The Egyptian regime is characterized by, for instance, a multiparty-system, steps toward economic liberalization, and some level of persistent state opposition, and has been considered on the way to liberal democracy, but can still hardly be estimated as such.Thus, the thesis takes part in a theoretical framework on democratization, and further analyzes the case of Egypt on grounds of socioeconomic development, political culture, and class configuration. By this contextual approach, the thesis adduces that a low level of modernization, an incomplete democratic political culture, and a bourgeoisie supported by the state are impending significant factors. The thesis additionally remarks on the interconnection of the adopted theories, and discusses a potential need for new theoretical propositionsA secondary aim of the thesis also gives some insights into the concurrence of regime stability and the absence of democracy in, what often could be labelled, authoritarian regimes.

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

The purpose of this study is to explore how hybrid work affects the experience of organizational justice and psychological well-being within an organization where working conditions differ between professional groups. Using a combination of semi-structured interviews and a quantitative survey, the study offers a nuanced understanding of how various work arrangements are perceived and interpreted by employees. The findings show that justice is not primarily about having equal conditions, but rather about how these conditions are understood and communicated within the organization. Many employees accept differences in work arrangements when they are perceived as logically justified and clearly communicated. However, when these differences lack explanation or are associated with injustices, frustration can arise even if employees understand the reasons behind them.

Earlier research has shown that young and adult citizens in Europe participate in politics in different ways. While adult citizens participate in more traditional ways, non-traditional ways are more frequent among younger citizens. Moreover, issue-based participation increases when Europeans turn away from mainstream politics. Citizens in the European Union EU-15 between 15-24 ages are likely to be ?critical? citizens of a working democracy compared to people in older ages (Sloam, 2016).

In this project the focus has been on the system for recombination at Oskarshamn 2. The recombining systems have on several occasions switched paths due to low pressure before the last ejector that?s feeding the recombiner. Of the mentioned reason, events and several measuring points have been analyzed in this report since the installation of the recombining systems.In order to prove theories and demonstrate what may be the cause of this problem, we used heat balance calculations by the program Probera. Using the program, we can demonstrate that the catalytic process does not reach the desired temperature with the amount of combustible substance.

As a result of increased energy prices more and more energy-efficient homes are coveted. An energy-efficient alternative is passive houses, which is characterized by an extremely well insulated building envelope that recovers the heat without the use of radiators or under floor heating. But a passive house requires a higher investment cost than a conventional building project, since it will require more construction materials, training of construction workers, greater land area, and long construction period. But the lower operating cost expects to pay back the higher cost of investment. We therefore question how profitable a passive house is in relation to houses built according to modern conventional building techniques.The aim of our study is to investigate the viability of passive houses compared to convent­ional houses.

This final thesis is carried out at BAE Systems Hägglunds in Örnsköldsvik. The mission was to construct and integrate a new semi-active damping unit in the terrain vehicle BvS10. Questions that came up during the process, among others, was how to mount the damping unit to the vehicle in a flexible way without exposing it to unnecessary wears.A generation of the concept is made in 3D using CATIA V5 of a possible solution to the problem. The idea is to weld the unit to the skid girder which is one of the main constructions of the track system. In this way the damping unit will come closer to the track system, which will partly protect it from impacts from below and minimize current problems with breaking forces in the torsion shafts.The complete construction was then analyzed, first by theoretical calculations and then with the FEM-tools in CATIA V5.

In this paper we examine what security is to the individual and how the individual creates and maintains security in their work. The purpose of this paper is to study how the creating of security in working life is performed. We conduct six semi-structured qualitative interviews with permanent employees in the private sector and we encode our material using thematic analysis. We analyze our material and illustrate our problem area on the basis of Anthony Giddens's theory of ontological security and give examples of how security and creating of security is performed at the empirical field with previous studies in the research area. Our survey shows that security for the individual at work seems to be about having continuity in everyday life, financial stability, a permanent employment, a challenging and fun job and a family in good health and good living.