Idag finns det ingen som granskar läroböcker i Sverige. Enligt forskarna spelar matematikläroboken en dominerande roll i matematikundervisning i Sverige. Därför bör mer uppmärksamhet riktas mot läroböckernas kvalitet. Mitt syfte med denna studie är därför att se om och i vilken omfattning alla centrala aspekter inom grundläggande taluppfattning, addition och subtraktion finns med i tre matematikläroböcker för årskurs ett. Med centrala aspekter menas aspekter som är väsentliga för att eleven ska kunna bygga sitt vetande i ett visst ämnesområde.

This thesis deals with numerical simulation of earth pressure against tubular bridges in the software Plaxis. Plaxis is a FEM (Finite Element Method) software based on numerical calculations for which approximate solutions are developed through an iterative process. The program is specifically designed for soil and rock mechanical tests, such as voltage and deformation calculations in soil.The Royal Institute of Technology conducted in 2005, field tests on tubular bridges of corrugated steel, which was part of Ersa Bayoglu Fleners PhD (Bayoglu Flener, 2009). She studied how two different tubular bridges deformed during installation and filling. Tests and measurements were made during filling.

In Örebro, the car traffic share does not tend to decrease. The crowdedness on some of the bus routes is high at times. Investigations show that the residents of Örebro want a city centre whose street environment is more restrictive of car traffic and better for pedestrians, cyclists and public transport. To decrease the car traffic share a rapid, convenient, clear, effective and environmental friendly public transport with high frequency and strong capacity in a short, direct and logical network is needed. A modern tramway fulfils these criteria.At first, this report describes factors that are important to take into consideration when planning a tramway.

Sitka spruce (Picea sitchensis (Bong.) Carr) is just like Norway spruce (Picea abies) a species in thegenus picea. The natural range of Sitka spruce is a narrow strip along the west coast of North America. Itis the most coastal of all picea species, and very dependent on the mild and humid climate along thepacific coast.Sitka spruce has been grown a long time in the countries around the North Sea, particularly in GreatBritain where it currently is the most important species in British forestry. Sitka spruce has not beenplanted in Swedish forests to any large extent before the storm Gudrun in 2005. Several studies indicatethat the production of wood biomass is higher for Sitka spruce compared to Norway spruce.

Newbeam Sweden AB är ett ganska ungt företag som genom deras patent har börjat kunna pressa unika träkompositer i 3 dimensioner. Företaget ligger i startgroparna med sin första tillverkningslina som skall öppnas i Söderhamn, Hälsingland.De själva har satsat mycket mot byggnadsindustrin. Min uppgift i detta arbete har varit att undersöka andra marknader med deras profi lpressade träkompositer som grund. Inriktningen blev butiksinredningar som ett resultat av researcharbetet som gjordes.Intervjuer och undersökningar gav en bild av hur viktigt det är med användarvänlighet samt enkelhet och de två orden blev mitt motto arbetet igenom.Resultatet av detta kom att bli lite mer än bara butiksinredningar..

This thesis has identified and studied measures to allow for reduced use of electricity in a waste incineration plant in western Sweden. The energy extracted from the waste at the powerplant is utilized and sold in form of electricity and heat. Technical and environmentally the combined heat and power plant is by today's standards among the leading waste incineration plants in the world. The owners are constantly striving to improve the efficiency of the waste incineration plant. They have seen the opportunities for savings in reducing internal usage of electricity.

This report is a joint venture with SCA Skog AB in the Jämtland forest management area. The company is a major player in the timber market in northern Sweden, and also a large business globally with offices in over 100 countries. The purpose of the study was to find out how timber suppliers want feedback/follow-up after completion of timber business. To determine this, a questionnaire survey was sent out to 75 landowners who supplied the wood for the company during the past year. The questionnaire consisted of a total of 15 questions with the opportunity to comment on certain issues.

My project aims to understand more about the methods used in making woven textiles on an industrial level, and how these tech¬niques can be adapted to create object-specific pieces. On visiting the furniture fair in Stockholm, I was surprised to see that most of the textiles used for furniture were so similar, despite the variation in the furniture itself. My project is about creating textile patterns that are specific for each piece.The idea behind the process could be used for any product, but the pattern I created is specifically for the armchair Accent by Yngve Ekström. I wanted to create the feeling of a pattern moving over the surface of the object and adjusting to it. I worked primarily with differences in density.

The report is a project in cooperation with the Swedish toy company Playsam. The assignment was to design a new toy to their range of products, a pull along toy in shape of a snail with a mechanical function. The research phase contains studies and analysis of the company, its identity, product range and its customers. The research phase includes all the information needed to complete the project. A number of concepts were presented for evaluation by the company.

The purpose of this thesis is to examinethe possibilities for adding a floor to anexisting building using the two materialswood and sheet metal profiles as the loadbearing structure. An apartment buildingfrom the 60s has been used as referencehouse. Two different suggestions for thedesign are presented in the rapport. Oneof them has been analyzed with wood andsheet metal as the load bearing structure.Using the old constructional calculationsand blueprints of the existing buildings,the load bearing capacity has beencalculated. In the calculation programFEM-Design the building has been testedwith the loads that an extra floor wouldgive.

Logosol is a company that produce small-scale wood processing products. To be able to expand the business Logosol have decided to increase exports, their target markets are the US, Russia, Germany and Norway. The expansion has mainly been through subsidiaries situated on the abroad markets. The subsidiaries have done poor results and that has influenced the whole company. CEO Bengt-Olov Byström made a decision to sell out the units to the people who worked in the business.

Vårt syfte med detta examensarbete är att undersöka hur föräldrakontakten ser ut på en invandrartät skola i Malmö, med särskilt fokus på utvecklingssamtalet. Vi har gjort fem semi-strukturerade intervjuer med fyra olika lärare samt biträdande rektorn på skolan. Våra slutsatser är att de flesta av föräldrarna i grundskolans senare år, oavsett kunskaper i svenska språket, kommer till utvecklingssamtalet. Däremot uteblir majoriteten vid föräldramöten. Vårt resultat indikerar att detta inte bara beror på om man förstår svenska eller inte, utan också exempelvis på vad man som förälder prioriterar eller känner sig delaktig i.

Changes in swallowing function are common in elderly and chronically ill individuals. Therefore it is important to be aware of these changes and their prevalence. The aim of this study was to assess the prevalence of dysphagia in nursing homes in the municipality of Linköping, and to correlate dysphagia with variables that can be a cause or a consequence of dysphagia. These variables were gender, age, MMT-result, dentition, weight loss, medical diagnose or number of medications. The intention was also to examine the additional information regarding dysphagia supplied by pulse oximetry.Sixty nursing home residents aged 74-101 years were chosen to participate in the study.

The New National Elevation Model (NNH) is a new high-resolution digital elevation model (DEM) of Sweden from airborne laser scanning. It creates many new opportunities, particularly in the area of flood mapping. NNH is provided by Lantmäteriet in two formats, both in raw LIDAR (Light Detection and Ranging) data and in grid format with two meter resolution. These alternatives have advantages and disadvantages and the aim of this thesis research is to identify these. One of the focuses of the study is data storage and thus data structure analysis, resolution and storage facilities. The research questions are:Why and in what context the different NNH-products from the National Land Survey are used (DEM 2+ or point cloud)?What constraints and opportunities are created by the different options, mainly in terms of different software, resolution, and data storage?The study area is Kärsön in Ekerö municipality located in Stockholms län and has an approximate area of 25 square kilometers. The study is divided into two parts. The first objective is to identify the consequences of using different software to create DEM from pointcloud compared to the DEM2+ model. Height models with a two meter resolution are created in FME and ArcGIS. The models are then compared with the grid from Lantmäteriet, created in TerraScan. The second objective is to examine the impact of the change in resolution, both the storage aspect and both the accuracy aspect. Inverse Distance Weighted (IDW) is an interpolation method which in previous studies proved to have the best results on high resolution LIDAR data. This model was tested and compared with a model from FMEs built-in function and the model from Lantmäteriet wich are based on triangulation (also proved a good method in previous studies). The grid created in TerraScan has good properties such as accuracy.

This report discusses questions concerning wear on forest roads. The purpose of the work is to investigate if the wear on the roads will decrease when the speed limit gets lower for the trucks that transport the wood. A normal forest road, class B, was used in the study. In total 5000 m3f timber was transported on the road. Data about the road was measured with a profilograph car before and after the timber transport.