This report is our Master thesis. Our work has taken place at a one-stop-shop in Sölvesborg during the spring of 2002. We have conducted ethnographical studies concerning the one-stop-shops frontdesk and telephone exchange. During these studies we became aware of some differences under which the daily work was to be carried out. When operating the switchboard the staff usually work alone and perform the tasks individually.

The Swedish cooperative Lantmännen Ekonomiska Förening has initiated a project labelled "Operation Blåljus" that includes an extensive program for closing down elevators. The number of elevators will be reduced from 92 to approximately 15 after harvest of 2007. The objective of Blåljus is to increase the price of grain with 10 öre/kg. A project has been initiated at the Lantmännen Grain division where the purpose is to provide the farmers with support in their decisions and practical advice how they can load a 35 ton grain truck on 30 minutes. The result from the project will serve as a support system to the farmer in his ambition to achieve cost efficient systems to load a truck with grain on the farm.

The aim of this thesis is to use Gabriel Tardes theories concerning imitation, repetition and the public opinion as a way of understanding how transmedial communication develops over time. This involves a study of social media, traditional press and public organizations in relation to each other. The campaign, What are you doing? (Vad håller du på med?, 2013), launched by the Swedish military as a way of drafting more soldiers, is used as an example of how the theories can be applied to help us understand connections, patterns and social behavior in the rapid mutation and viral spreading of information. By discussing the campaign and its effects, the ambition is to give an understanding of how a campaign of this scale could be planned for and structured.

In the last years people has become more aware of issues regarding corporate social responsibility. This has led to a more thorough control of big multinational companies, which are often held account of violating social, ethical and environmental values. The term most often used for this is corporate social responsibility (CSR). H&M is a Swedish multinational company and the concept of H&M is fashion to a low price. The material most often used in producing clothes is cotton.

This report deals with issues related to construction waste. Building material that has not been built into the project is defined as construction waste. Cost of construction waste amounts to 4-12 % of the total cost of the project. Moreover, cost of construction waste is 1-3 % of the production cost. The aim of this study is to increase knowledge about the main causes of waste within the construction industry.

Sweden has formulated ambitious energy goals which signify that by year 2050 the energy usage should be halved. One of the objectives is the reduction of energy usage by 20% by year 2020 and that it should be compared to the usage of energy from 1995. In parallel with increased energy requirements for buildings the demand on housing conservation, by highlighting also buildings from the last 50 years as part of the building heritage, continues to enhance, which in theory means that there is a conflict between these.The law will never be able to point out unique buildings and PBL (planning and building act) is not especially concrete. The National Housing Board has tried to make this more concrete by the new BBR regulations though there are still an enormous variety of interpretations.This report deals with the conflict between conservation requirements and additional insulation of the building envelope and is limited to multi-residential buildings built between the years 1945 and 1975. It is the stock with the greatest energy consumption and that is where the big challenge lies.

Det råder bostadsbrist i Stockholm, en lösning är att bygga nya bostäder. En annan lösning är att nyttja befintliga byggnader som inte används som bostäder, genom att bygga om kontor- och industrilokaler till bostäder. Det som händer är att industriområden flyttas längre ut från de attraktiva bostadsområdena. Ombyggnationer av byggnader med olika lokalkategorier kräver omfattande bearbetning och samarbete mellan flera aktörer såsom stadsplanerare, byggherrar, arkitekter, konstruktörer med flera. Det finns många aspekter att ta hänsyn till vid ombyggnationsprojekt och vårt mål är att belysa några av dessa.Den här rapporten studerar först och främst konstruktörens roll, vad en konstruktör ska tänka på vid en ombyggnation.

Concrete floors have traditionally had no problems with annoying vibrations. However with the demand for larger spans the floors need to be made more slender with a higher degree of utilization and lower mass. Therefore new floors may have problems with vibration serviceability. This thesis studies the vibration characteristics of hollow core slabs. The analysis was made in the finite element program Ansys. The hollow core slab was subjected to a varying force simulating one person walking across the slab.

This study was done regarding whether sealing or ventilation is the best solution to prevent moisture on cold attics. The authors of this report addressed the problem with moisture in attics when they started their cooperation with Peab.The methods included interviews with people, database research, and calculations of a project in Akersberga north of Stockholm. The conclusion is based on interviews and other information as they are analyzed in relation to the house of reference. The focus of this report is on problems with moisture in the attics known as cold attics.The background of the problem with moisture is that today?s slabs are usually insulated to save energy and that the attics nearly gives the climate as the outdoor climate.

This study was done regarding whether sealing or ventilation is the best solution to prevent moisture on cold attics. The authors of this report addressed the problem with moisture in attics when they started their cooperation with Peab.The methods included interviews with people, database research, and calculations of a project in Akersberga north of Stockholm. The conclusion is based on interviews and other information as they are analyzed in relation to the house of reference. The focus of this report is on problems with moisture in the attics known as cold attics.The background of the problem with moisture is that today?s slabs are usually insulated to save energy and that the attics nearly gives the climate as the outdoor climate.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

Självkompakterande betong (SKB) eller som den också kallas vibreringsfri betong upptäcktes och utvecklades i Japan i slutet av 1980- talet. Anledningen till detta utvecklingsarbete var att betong gjutning väldigt kämpigt och tillgången på erfarna betongarbetare började bli låg. I Sverige använde man självkompakterande betong året 1993 som tekniken hämtades hem av CBI Betonginstitutet.Användning av självkompakterande betong leder till många fördelar som skiljer sig från den vanliga betongen avseende arbetsmiljö t.ex. slipper man vibrering och undviker tungt arbete som i konsekvens minskar antal skador på arbetsplatsen. Utöver detta ger SKB förkortad arbetstid, bättre utförande och möjlighet till arbetskraftbesparing.Sedan 1997 har Sverige ökat användning av SKB i platsgjutning medan andra länder som Danmark har gått fram till ca 30 % av sin platsgjutning.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.