A key part in the development and verification of digital systems is simulation. But hardware simulators are expensive, and software simulation is not fast enough for designs with a large number of gates. As today?s digital zesigns constantly grow in size (number of gates), and that trend shows no signs to end, faster simulators handling millions of gates are needed. We investigate how to create a software gate-level simulator able to simulate a high number of gates fast.

Scintigraphic examination of the esophagus has for some time been the method of choice for the study of motility dysfunction in humans. The method has not yet been described for horses hence the lack of reference values for passage time for a bolus through the esophagus in healthy subjects. The purposes of this study were to measure passage velocity and time for a bolus to pass through the esophagus in healthy subjects, as well as to evaluate the reproducibility of the method. Eight warm-blooded trotters were used in the study. The horses were sedated with a low dose of Acepromazine prior to onset of the study.

This thesis describes how a cost reduction project was done on the Packsize ondemand packing machine EM7. The cost reduction was achieved by making minorredesigns of the EM7.The project began by studying the EM7´s structure and function by working on itsassembly line. A short literature study on the subject Design for Manufacturing wasalso done.By working on the assembly line and by speaking with staff from production anddevelopment departments, a number of ideas for reducing manufacturing costs arose.Estimations of the potential cost reduction size for each proposal were done incollaboration with vendors and the purchasing department. Based on the size of the cost reduction, technical risk, impact on the assembly lineand the development time the various proposals were ranked. The two highestranked proposals were selected for further development towards finished solutions.One of the ideas that were selected to develop in to a finished solution meant thatsome of the pneumatic valves were replaced with others.

A water treatment unit consisting of two aeration basins, two settling tanks, a residence basinand a horizontal subsurface flow wetland were used to treat wastewater from an eggprocessing factory in Brazil. The aim of this paper was to determine the efficiency of thesystem in reducing nitrogen, phosphorus, BOD5 and TSS (among other parameters) andgetting a further understanding on different kinds of constructed treatment wetlands as well astheir nitrogen and phosphorus removal processes. The wastewater from the factory consistedof process water from manufacturing and water used for cleaning, no stormwater or sewagewater entered the system. Tests were taken three times a month from October 2013 ?til April2014.

Syfte: Syftet med vår uppsats är att belysa den etiska dimensionen av harm reductionanknuten missbrukarvård. Till vår hjälp har vi haft etiska teorier och sociologen Zygmunt Baumans begrepp. Frågeställningar: Vi har använt oss av två huvudfrågor som vi därunder bryter ner i konkreta frågor. 1 Hur ser de etiska resonemangen ut hos personal verksam inom harm reductionanknuten missbrukarvård?Vilken typ av etik använder de sig av? Har de centrala etiska principer, vilka? Hur ser de på etik och moral? Följer de etiskt formulerade regler? Hur ser de på prohibition? Hur ser de på drogbruk? Hur ser de på människan? Vad driver dem i deras arbete? Hur ser de på harm reductions påverkan på samhället?2 Hur kan man förstå harm reductionmetoders framväxt ur Baumans sociologiska perspektiv?Hur kan harm reductionmetoder kopplas till det senmoderna samhället? Hur kan harm reduction rättfärdigas etiskt utifrån ett sociologiskt perspektiv? Hur kan harm reductions förklarar sociologiskt? Vilka förutsättningar fanns för att harm reduction skulle kunna utvecklas? Hur kan Baumans begrepp förklara harm reductions ställning i det senmoderna samhället? Metod: Vi har använt oss av en kvalitativ metod med intervjuer som redskap.

Growth of small businesses is vital to the Swedish economy, and many entrepreneurs want their enterprises to grow. However, the business climate of today is more changing than ever, and attributes becoming increasingly important for companies in order to deal with this are flexibility, speed, and adaptability: characteristics normally attributed to small enterprises. As a larger organization often is associated with more rigidity as a consequence of a higher degree of formalization, entrepreneurs are hesitant to seize growth opportunities, as they fear it will have negative impact on the aforementioned competitive advantages their enterprise possesses as a small business. This simple case study of a growing small enterprise investigates the effects of organizational growth on a small business' organizational structure and through its above mentioned advantages. The study finds that avoiding formalization while growing damages the competitiveness of the firm, and concludes that a degree of formalization is a necessity to maintain the flexibility, speed and adaptability in a growing small business..

In the dairy production it is necessary to be able to sort cows. Dairy cows are sorted for many different reasons i.e. regrouping into production strings or for treatments i.e. inseminations, pregnancy and health checks, vaccinations or hoof trimmings. One labour saving way of conducting sorting is by using an automatic sort gate.

In modern society in terms of economics and environmental impact, it is important to ensure that a company is as energy efficient as possible to reduce the amount of energy used. About 10 TWh of electricity used annually to pump drives in Swedish industry. Therefore, pumping system has great potential for energy savings.The objective of this report was to determine how much energy and money that can be saved with the insertion of variable speed drive to six pumps on Bleach plant 4 in Skutskär Mill. The work was performed with electrical measurements during one week, analysis of pump curves and the compilation of production data over a year.The results show that four of these six pumps were profitable and yielded an annual saving of 1172 MWh of electricity and 560 000 SEK. With an economic lifetime of 10 years and a discount rate of 6.8% the final result for the entire life-cycle savings became 3 355 000 SEK.

Introduction: There was a reduction in Sweden of the share capital in 2010, in which the share capital was reduced from 100 000 SEK to 50 000 SEK. The reason behind the reduction of the share capital was to enable more people to start limited liability companies in Sweden. Meanwhile in Europe, they questioned the function of the share capital, and as a result of this discussion a number of European countries have abolished the requirement for the share capital in limited liability companies.Purpose: The purpose of this study is to investigate what meaning the share capital has to entrepreneurs based on their own businesses, and to see what function the share capital have for the creditors.Problem: What are the meaning of the share capital for today´s entrepreneurs and its creditors?Methodology: The study is based on a qualitative research method in which a cross-sectional study was done with four small limited liability companies and four creditors.Conclusions: The share capital functions and meaning has lost its intended meaning as creditor protection and the help to facilitate the raising of capital. The share capitals intention has to some extent been eroded.

The purpose of this essay is to examine cost-benefit-analysis as a method of evaluation of labour market policy. To illustrate the possibilities and difficulties of the method chapter four contains a partial cost-benefit-analysis of the results of a labour market project in Kävlinge. The questions this essay strives to answer are the following: What possibilities and difficulties do cost-benefit-analyses entail? How would one conduct a cost-benefit-analysis of the project in Kävlinge?The method used in this essay is mainly a literature study of cost-benefit-analysis of labour market programs. The labour market project Brännpunkt is used as an example in a partial cost-benefit-analysis.The applied cost-benefit-analysis of the Brännpunkt project in Kävlinge shows that it is possible to calculate the profit for the society as a whole, given that the necessary information is obtainable.

The general consensus is that the gap between the Swedish variable mortgage rate and the repo rate has increased over the last years. Although the Riksbank in recent times has cut its base rate, many banks have chosen either to leave the interest rate on variable mortgages unchanged, or they did reduce it but by less points than the reduction in the repo rate. The linear relationship between the repo rate and the variable mortgage rate has changed over the last decade and the mortgage margins these days are relatively high. This can somewhat be explained by the new rules introduced in the bank sector requiring banks to increase liquidity and equity. Since mortgage loans play an important role in banks? lending business it is of interest to gain knowledge in whether a repo rate reduction latterly has generated a limited affect on the banks lending rates..

To maintain production in high salaries countries and strength in competition against other companies, it is today more important than ever to maximize production, offer a wide spectra of products and be able to deliver on the customers desire of shorter and shorter delivery time. Flexible production and short time spent on die changes is vital to achieve these desires. The interest for die changeover time reduction grew in the same pace as the demand for increased product variety grew. SMED as a method of reducing time spent on die changeovers were developed in between 1950-1970, by the Japanese Shigeo Shingo.The purpose of this thesis work has been to investigate the result of SMED in a die casting facility, and compare the result from it with the result considering time spent on die changeovers when investing in new equipment. The goal is to implement a thorough investigation by using the SMED method at Tenhults Pressgjuteri AB and make a brochure that have to be simple to understand, in purpose to draw interest to the advantages of using SMED as a method.Commissioned by the Swedish foundry association Swecast, the work has been carried out by studying die changeovers at Tenhults Pressgjuteri AB, where filming and interviews with the operators have been included in the analysis.

The aim of this thesis is to improve the control of urea injection at the combined power and heating plant Framtidens Gärstad (FTG). Tekniska Verken i Linköping AB is the owner of the plant.The FTG plant consists of a boiler where garbage combustion is done. From the combustion nitrogen oxides are emitted. These nitrogen oxides are hazardous to the environment. To reduce the nitrogen oxides, injection of urea into the boiler is used.

In 1996 a hunting test for British gun dogs was started in Sweden, based on a similar one al-ready in place in Norway. The aim of the new test was to describe the hunting ability of the dog and to use the results as a basis for selection. However, up to now, no genetic study of these data has been done. Therefore the aim of this study was to estimate genetic parameters for the traits measured in the hunting test and to investigate whether the traits can summarized into fewer overall measures. Data from trails of British gundogs between 1996 and 2005 in Sweden were used to estimate genetic parameters and environmental effects in hunting performance. British gundogs consist of five different breeds: Pointer, English setter (ES), Gordon setter (GS), Irish red setter (Irl S) and Irish red and white setter.

This report will outline a proposal for the improvement of the baggage sorting facility at Arlanda airport. Swedavia is a state owned company group that operates, owns and develops airports in Sweden. One of their main roles is to create accessibility needed to facilitate and streamline the work at the airport.Swedavia is constantly working to develop new solutions and enhancements that will help to standardize and automate the work at airports without major impact on climate and above all adapt these solutions to work.The project has been aimed to identify and isolate the problem at the check-in counter, investigate the possibility of setting a speed control on the DC motor driving the luggage conveyer belt at the check-in desk so that the luggage does not lose tracking already there, as well as evaluate the new sorting systems planned to be introduce in the upcoming refurbishment of the sorting area.To determine the parameters that are used to regulate the speed of the baggage conveyor belt, information about the inputs and outputs that participated in the process was gathered. Information was collected both practically and theoretically. Process was followed and monitored by the supervisor of the company, and a theoretical study was done separately on my own.