In this thesis, two real-time stereo methods have been implemented and evaluated. The first one is based on blockmatching and the second one is based on local phase. The goal was to be able to run the algorithms at real-time and examine which one is best. The blockmatching method performed better than the phase based method, both in speed and accuracy. SIMD operations (Single Instruction Multiple Data) have been used in the processor giving a speed boost by a factor of two..

The aim of this Master of Science Thesis is to develop guidelines and improvementsuggestions of RiNOVA Traffic AB?s dynamic speed bump. The project started with athorough pre study of the design and its function to find out how passing vehiclesaffects the dynamic speed bump. The majority part of the pre study was to createnecessary mathematical models to explain the arisen forces and strains.The results of the mathematical models gave necessary information about the designregarding weaknesses and flaws. The most critical ones where those which interferedwith the design?s performance and reliability, and therefore needed to be corrected.These problems where more thorough analysed and discussed with experts before thefinal guidelines and improvement suggestions where developed.The parts of the design that had to be redesigned were the extension springs and thebearing that enables the dynamic properties.

The purpose of the thesis is to investigate whether a higher income make individuals more likely to exceed the speed limit. In addition to income the variables age, sex, perception of the speed of the average driver and offense history for the last three years are taken into account.The method used is based on a survey performed at the mandatory annual motor-vehicle inspection (Bilprovningen). 177 individuals were asked to participate, of these, 124 completed the survey which in turn left us with 117 usable observations.The analysis is based on two forms of regression, a linear regression and an ordered logit regression to confirm the results for the ordinal data.The final model indicates a result where income and age are statistically significant. Sex is considered insignificant for our data material and is excluded from the model. Age has a negative effect on the propensity to exceed the speed limit while income has a positive effect.

Title:?Speed cameras - an prevention of crime and a standard forming instrument of control??Authors: Markus HanssonTutors: Bo Isenberg & Carl HultExaminator: Ulf DruggeThe School of Human SciencesUniversity of KalmarThe studys purpose is to get a absorbed understanding for peoples attitude, and effect of speed cameras. The disposition for the study is to integrate earlier studies in the matter, combined with elevating interesting sociological conceptions. As an attempt to understand speed cameras as an instrument of force on the individual have Michel Foucaults concept Panopticon been used to see its effect, and it?s look upon how crime prevention will be formulated, which can give an explanation of why speed cameras are being used as an instrument of control on the traffic area.

In the dairy production it is necessary to be able to sort cows. Dairy cows are sorted for many different reasons i.e. regrouping into production strings or for treatments i.e. inseminations, pregnancy and health checks, vaccinations or hoof trimmings. One labour saving way of conducting sorting is by using an automatic sort gate.

Road safety is the result of measures to reduce therisk of accident and injury. (Nationalencyklopedin,2008). In principle, road safety means to arrive saveand sound.Safe traffic in cities is mainly achieved throughappropriate speed. In Sweden, more than half ofall rides happen with a speed above the legal speedlimit (Holmberg, Hydén m.fl, 1996). To reducespeed in order to increase safety requires measureswhich influence a driver?s motives for his orher choice of speed even if these are not rational(Boverket, 2002).

Road safety is the result of measures to reduce therisk of accident and injury. (Nationalencyklopedin,2008). In principle, road safety means to arrive saveand sound.Safe traffic in cities is mainly achieved throughappropriate speed. In Sweden, more than half ofall rides happen with a speed above the legal speedlimit (Holmberg, Hydén m.fl, 1996). To reducespeed in order to increase safety requires measureswhich influence a driver?s motives for his orher choice of speed even if these are not rational(Boverket, 2002).

The aim of this study is to investigate the effect of an intervention that focuses on phonics, decoding, reading speed and phonological awareness for 8-9 year old children in reading difficulties. Participants were selected on the basis of screening test results in grade one (decoding and reading comprehension). The participants were divided into two groups, an intervention group (A1, n=10 children) and a control group (A2, n=10). A1 received 30 minutes of intense reading instruction every day for six weeks from special educational needs teachers on top of their usual classroom based reading instruction. The control group received only their usual classroom-based reading instruction.

n this dissertation a comparison of two evolutionary methods for evolving ANNs for robot control is made. The methods compared are SANE with enforced sub-population and delta-coding, and marker-based encoding. In an attempt to speed up evolution, marker-based encoding is extended with delta-coding. The task selected for comparison is the hunter-prey task. This task requires the robot controller to posess some form of memory as the prey can move out of sensor range.

The survival of hatchery reared smolts is generally low after release. To get a better understanding of what variables affecting migration success, Atlantic salmon smolts were studied during their out-migration in the old river channel in the lower part of river Umeälven. The area consists of shifting habitat and complex structures which causes difficulties for smolt on their migration out to sea. The aim of this study was to try to determine the effects of feed restriction, fin conditions and different physical barriers in the river, on the migratory behavior of Atlantic salmon smolts in the river Umeälven. The river was divided into six different sections using acoustic receivers strategically deployed along the river. Two-year old hatchery-reared smolts (n=150), in three different weight classes, were tagged with acoustic transmitters.

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

The combustion engines in today?s vehicles are getting more and more advanced and there are increasing demands on that the engines should operate during optimal conditions. Examples of internal combustion engine parameters which may be carefully controlled are the rate between fuel and air, that this gas mixture is homogenous enough and that it is ignited at the correct moment. Moreover, the requirements of these parameters vary depending on, among other, engine speed and load. To meet these requirements in all occurring operation conditions, it is required that many subsystems work together.

This project was led on behalf of Bombardier Transportation in Västerås, Sweden, incollaboration with KTH Stockholm and EPFL Lausanne. This project is connected to thedevelopment of a new and simplified tilt system for rail vehicles.Growing competition from other means of transportation has forced railway companiesthroughout the world to search for increased performances.Travelling time is the mostobvious performance indicator that may be improved by introducing high-speed trains.They require very large curve radii and long transitions curves not to impairridecomfort, another performance indicator. Building new tracks adapted to high speedtrains is very costly and can only be justified where the passenger base is large.Trains with the capability to tilt the carbodies inwards the curve is a more cost efficientalternative. The tilt inwards reduces thelateral force felt by the passengers allowing thetrain to pass curves at enhanced speed with maintained ride comfort but increases thefrequency ofmotion sickness.The benefits of tilting trains are improved speed capability in curves and enhancedpassengers comfort, but at higher buying and maintenance cost. As the conventionaltrains increase their speed in curves, the performance advantage of tilting trains isreduced while their prize is still kept significantly higher and constant.

In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.