Problem: The corrugated board industry is highly affected by customer uncertainty, various demands and short delivery times. In combination with a complex multi-step production process managers have to be able to identify bottle-necks and gain knowledge and understanding of how different changes in process will affect the production output. <br/><br/>Purpose: The purpose of this master thesis is twofold, (1) to examine applicability of complexity theory through agent-based modelling on a production process (2) to identify improvement areas in order to increase the production output at SKS production site in Eslöv, by modelling and simulating the production process through an agent-based model. <br/><br/>Method: The chosen method of this study is a combination of a case study and a complex system approach. The empirical data was collected through interviews, observation and document studies which were analysed through an agent-based simulation model.

The purpose of this report was to investigate to which extent local presence of large herbivore mammals (Alces alces, Cervus elaphus, Capreolus capreolus, Dama dama and Sus scrofa) covaries with small rodents (Myodes glaerolus, Apodemus flavicollis and Apodemus sylvaticus? The hypothesis was that high abundance of wild ungulates would inhibit the density of small forest rodents. The data was collected during field work within FoMA (Environmental Monitoring Assessment)/SLU (Swedish University of Agricultural Science). The Ungulate dropping inventory and rodent trappings, which is the base in this report, where performed 2012 ? 2014 in Gnesta/Nyköping municipalities (G/N) with a relatively high density of wild ungulates and Vetlanda/Växjö municipalities (V/V) with relatively lower wild ungulate density.

Rift Valley Fever (RVF) is a disease caused by Rift Valley Fever virus (RVFV), which is an arbovirus. An arbovirus is a virus that is transmitted by an arthropod vector, in this case a mosquito. The virus is a member of the Phlebovirus genus in the family Bunyaviridae. It was first identified in the Rift Valley in Kenya in 1930. The disease is a zoonosis but mainly affects domestic ruminants inducing massive abortions and a high mortality among young animals.

The purpose of this study is to seek answers to an ongoing problem in the forest sector; why scarifying operators quit their job. Scarification quality is crucial for successful reforestation after clear felling. It is therefore important to keep good operators working in the business. To collect the desirable information interviews were made both with contractors who are working and operators who have stopped working with scarifying. The conclusion one can draw from this report is that the scarifying operator job needs improvement in multiple areas. The former operators are mostly dissatisfied with the stress, low wages and negative physical effects that this work brings..

This master thesis is made in co-operation with the Department of Forest Management and Products at the Swedish University of Agriculture in Uppsala and the Forestry Association in Stockholm. The purpose of the Master thesis was to describe how pre-schools in Sweden use forests and green areas, and to understand how different factors can affect the use of the nature. The purpose of the interviews was to create a picture of attitudes and routines of the pre-schools, in the matter of visiting the nature. The thesis is built on interviews where fifteen pre-schools in five large cities around Sweden participated. Among these pre-schools, five of them worked with special focus on nature, while the other ten did not have any particular focus connected to their activity.

AbstractThis bachelor thesis has been assigned by the company ACG Nyström, Borås. ACG Nyström is working in cooperation with a Swiss company named Jentschmann AG. Jentschmann is a manufacturer of ultra sonic welding machines which ACG Nyström is marketing in Scandinavia and the Baltic States. On behalf of Jentschmann AG the company has the aim to introduce the ultra sonic welding technique to new companies.The aim of this thesis is to compare traditional sewing machines with ultra sonic welding machines within two textile areas, protective clothing and outdoor living.Two investigative questions have been formulated for this purpose: what are the differences between a sewing machine and an ultra sonic welding machine? Is it possible to replace the sewing technology with ultra sonic welding? These stand as guidance for this paper.To gather knowledge interviews, literature studies, and tests on two different ultra sonic welding machines were performed.

Subclinical mastitis (SCM) is a well-known problem in the dairy sector, where it causes severe economic losses mainly due to reduced milk production. This is a problem not only in the western world but also in developing countries. Surveys from different developing countries have shown a SCM prevalence of 52.4 ? 88.6 % at cow level and 26.7 ? 63.2 % at quarter-level. To combat mastitis is important to optimize the milk production of the cow.

We have different kinds of signal processing everywhere around us in our everyday life, in our cellphones, when we are listening to music, watching TV etc. This makes signal processing a very interesting and important technical area, where the demand of skilled engineers sets the limit of what is possible.Working with signal processing requires in-depth knowledge in areas such as mathematics, physics, electronics, and other related areas. For this, it has traditionally been demanded by a talented developer to also master the advanced programming languages such as C / C + + and Assembler.This has begun to change; today there are several companies that offer graphical development environments for signal processing, environments where programming skills are not needed anymore, and the focus can be on signal processing instead.The goal with this project is to build a corresponding graphical development environment to reach an understanding of what is required of these systems, and also to grasp what opportunities that are available within graphic programming. Inspiration for the work has partly arise from some of the tools available on the market, and partly from previous theses that have been written about graphic programming.The challenge lies in creating a program that can execute signal diagrams in real time from given signal blocks, and be able to handle feedback loops in an efficient way and to do so at the lowest "cost" in terms of clock cycles as possible. This should also be compared against to code, compile and run a complete signal diagram directly.To increase the usability it should also be possibility to externally manage in real time the parameters of the signal diagram during execution.The interface is a separate program, which is to some extent similar to Matlab Simulink, where a signal diagram is drawn up graphically by connecting wires between different signal blocks.

I den allmänna debatten om revisorer diskuteras bl.a. revisorns oberoende och hur det kan påverkas av revisorns roller som rådgivare till och granskare av ett företag. Vi ville undersöka inom vilka områden revisorn bidrar med rådgivning och få en uppfattning om hur detta eventuellt kunde påverka oberoendet mellan revisorn och ett nystartat företag. Vi valde att undersöka nystartade företag då vi inte funnit några tidigare studier på just den här kombinationen, revisor/nystartat företag.I vårt syfte att undersöka revisorns roll i nystartade företag har vi tagit reda på de vanligaste problemområdena, som nystartade företag upplever, och i vilken mån revisorerna hjälpt till som rådgivare. Undersökningen genomfördes med hjälp av intervjuer där respondenterna bestod av tre revisorer och ägarna till tre nystartade företag.

The review of Integrated green spaces in urban areas ? A case study of inner Brisbane highlight the significance of addressing characteristics, qualities and landscape values in our outdoor environment. The importance of green spaces to the wellbeing of people in the city and the ecological, social and cultural values they carry are widely recognised in the field of urban and regional planning. At the same time population growth, climate change and urban development put planners and scientists in a challenging position where new solutions must be put on the agenda in order to accomplish sustainability. Open space strategies, collaboration between stakeholders, public participation, learn from earlier failings and a ?value-led? approach facilitate the managing of open space. Brisbane is located in the fastest growing metropolitan region in Australia. The city´s open space landscapes offer cultural, geographical, recreational, social and scenic amenity assets, which make a major contribution to the regions identity they a wide world known for.

The population growth and urbanisation in low-income countries bring issues of poor living standards and miserable sanitation conditions onto the agenda. If well-functioning waste management systems were developed, this could master some of the problems. The already existing local informal waste handling system that is common in many low-income countries, needs to be developed with proper sorting and composting solutions to decrease the environmental burden and improve the overall situation in the dense cities. This master?s thesis project is performed with the intention of developing functional decentralised waste management units in the city of Pune, India.

Wind is used as an energy source all over the world. To be able to use this effectively, there is a need for as good forecasts and forecast models as possible. One of these models is Coupled Ocean/Atmosphere Mesoscale Prediction System (COAMPS®) that is used to calculate short time forecasts. This model is used here to calculate wind speeds at two different areas in Västra Götaland, Bengtsfors and Vänersborg. There are also wind measurements with SODAR stations for these areas.

In December 2008 the municipal council in Nybro, decided that the municipality shouldreduce the budget for food service. The budget should be reduced by 2 100 000 SEK.They decided that the children- and education committee, and the care committee would haveto lower their budget with 1 264 000 SEK respectively 636 000 SEK. The change have to bedone under two years, 60 % should be done under 2009 and 40 % under 2010.As a result of the decision, many kitchens have to become kitchens that only serve food, notcook it. This will result in preschool staff and nursing staff take over some of the tasks fromthe kitchen staff. The municipal council also decided that entrepreneurs could take over one(later two) cooking areas.A kitchen that serves food means that there isn?t any cooking involved.

Background: The Swedish fashion industry grows steadily, today it?s populated by many small and medium sized companies. Due to the big clothing chains dominant position small businesses risks to be ousted out of the fashion industry.Smaller companies may find it difficult to reach out to the customer by traditional advertising because their budgets are often smaller. It is therefore important for smaller companies to create loyal customers. If the smaller sized businesses in the fashion industry do not follow the rapid developments in society and focus on building strong brands and relationships, they will have problems with surviving in the long run.Problem definition: Which communicative factors are important in the choice of brand strategy to create a long-term survival for small and medium-sized companies in the fashion industry?Purpose: The purpose of the essay is to analyse and evaluate the brand as a communications tool for building a brand image.Method: The data which is being used in the essay is collected from interviews with companies and survey of each company's existing and potential customers.Theoretical perspective: Relationship Marketing Perspective and Transaction Marketing PerspectiveTheories: Brand Strategies, Total Communication, Brand Equity, Involvement Theory, Service Value Profit Chain.Empiric: The empirical data is primary data gathered from interviews with a representative for each company and from the questionnaires distributed to the customers of each company.Analysis: The analysis is an interpretation of the empirical material collected from interviews with each company and customers survey.

Biogas is a gaseous fuel, rich in methane, produced through a biological route in an anaerobic digester. A gas engine generates combined heat and power, which can be used at the farm to reduce energy cost. The process also generates a digestate, with better utilization of nutrient compared to cattle manure. The aim of this study is to analyze the profitability of a farm-scale biogas plant for combined heat and power (CHP) at Wapnö. Wapnö is an agriculture company located in the southern part of Sweden.