The purpose of this thesis is to study how swedishness is constructed and narrated in two Swedish documentary series that picture the Swedish participation in the international ISAF mission in Afghanistan. The main focus lies on how the Swedish soldier as such is portrayed, on which values, characteristics and qualities that they are said to embody and how these are linked to notions of swedishness, particularly the strong historical narrative, formed during the second half of the twentieth century, that defines Sweden as a peaceful, neutral and humanitarian state, with peaceful, enlightened and democratically minded citizens. Theoretically it draws on the concept of metanarrative to explain how ideas of shared national origin translates in to a broad organizing discourse, that defines, interprets and communicates notions of what it means to be a Swede and what is needed to make claims on swedishness. Another concept, that of national bodyscape, is also used to further define and explain how ideas of nationality are embodied and take the form of specific characteristics and  personal qualities. The meaning-making in these two series makes use of the above mentioned definition of swedishness as defined by humanitarian concerns, democratic ideals and moral superiority to construct an image of the Swedish soldiers as on the one hand soft, humanitarians, who are needed in Afghanistan because of their especially strong sense of justice and moral, and, on the other, as tough soldiers, who are able to participate in every aspect of the war as fighters.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

This paper constitutes graduate work at the Depart-ment of Urban and Rural Development at the Swedish University of Agricultural Sciences. In this paper the urban structure of the million program suburb Husby in Stockholm is examined and what effect this structure has on social life in the area. The main objective of the study has been to, with the help of morphological analyses, examine how to create meeting places and make the Husby Park more accessiblefor the inhabitants in Husby. There has been a selection of analyses to ensure that Husby?s spatial relationship with surrounding suburbs as well as local spaces in the Husby Park is described.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

This work has been done to develop a plan for a future dairy barn at theGästgivaregården and to show the space needed for cows and replacement heifers. Itwould also show the storage that will be needed. The design was largely based on resultsfrom studies on six different farms, but also the facts that are taken from research papersand articles in order to compare theory with practice. Because some farms only whereinterviewed by phone I have used a query form to obtain comparable resultes.The aim is to build a new barn with Automatic milking. I've drawn a milking stable for120 milking cow and replacement heifers with the capability to house up to 140 milkingcows if the farm would expand in the future.Calculations of feed amounts and space requirements have been made to see how manyhectares are needed to supply the cows and replacement heifers with feed and to knowabout what size of storage space is required.The investigations made in this writing are to answer questions about the AMS-unit`sposition and how to best maintain a good health status in the herd.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

Being an architect I create spaces with roof, walls and fl oor. The availability of the essential materials to create such spaces is practically unlimited. The materials also play a significant part to the character of the created space. I hope to contribute to the general understanding of materials as elements in the design of urban spaces by having intensely explored one specific material in depth, pointing out its bad and good qualities. I am of the opinion that the reason for choosing a material shouldn?t be because of a shortage of knowledge, facts or references, but what character you want for the room. When travelling across Europe, it sometimes feels like clay paving is everywhere, but back in Sweden it is almost unseen of in modern landscape architecture.

Webexhibits is a growing but unexplored, cultural phenomenon that indicates a new use of the Internet for cultural communication. In the essay two quantitative methods, logganalysis and websurveys, have been used to study the visitors in 5hus.nu. The purpose is to generate knowledge about webexhibits as a cultural manifestation and medium by studying the experience and actions of its visitors. To achieve the aim the paper explores the methodological questions of how to study webusers. Theories about the exhibition as a medium and the web as a virtual area of exhibits have been used to understand and interpret the results.

AbstractThis report has been developed in cooperation with Peab Region Bostad Göteborg, mentor at Krook& Tjäder (through Chalmers), and examiner at Chalmers University of Technology. The report is the result of a research of a building project, constructed by Peab. The report is investigating and it means to identify and evaluate qualities in the dwelling and its surroundings. Its purpose is to evaluate how the residents in a chosen housing cooperative enjoy living there. It shall, with help of chosen quality aspects, identify what expectations the residents had before moving in, how they experience the dwelling and its surroundings today, and what hopes they have for the future planning of the area.

Frågeställningar:På vilket sätt påverkas personalens arbetsmotivation av personalkostnadsbesparingar?Vilken betydelse har arbetsmotivationen vid personalkostnadsbesparingar för det finansiella resultatet på kort och lång sikt?.

The City is filled with signs of life. It teems with human traces waiting to be discovered. Street art of different kinds prevails behind traffic signs, on posts and electrical boxes. Personally con-structed dogs guard roundabouts all around Sweden and small gardens spire underneath window ledges. In this work I want to identify these phenomena and find out what thoughts inspired these creations.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

This degree project was intendet to construct and design packaging for beauty care. At the requestof AssiDomän Frövi the project group were instructed to innovate creative packagesmade of their cardboard Frövi Bright.Three different packages have been developed. Two of them are for child care products and onepackage is for several bath products. These results show that there are possibilities to create creativeand different packages of the cardboard Frövi Bright.The report also enters deeply into the special qualities of Frövi Bright and studies of packagingdesign..