Together with NCC and Sweco we measured the air-flow on a semi-detached house in Jönköping. When a pressure measurement is made, the house gets exposed to over- and under pressure. This is done in order to examine the houses climate shell. The climate shell of the semi-detached house we tested exceeded the required air thickness in BBR-2002, hence, measures have to be taken.This report also displays the importance of building air thick houses and what consequences a non air-thick house can have for the ones residing the house. A discussion of different measures is on for the addressed problems with the flow-measurement and the alternative construction-solutions.Furthermore we have described in this report of how to account for the performance of the air pressure, what kind of equipment we used and how we came up with the results.

This report reflects an examination work performed for Getrag All Wheel Drive AB during the spring of 2005. Among the companies range of products there exists some concern regarding the amount of clamping force and friction on bolted joints caused by the assembly torque.The aim of this project has been to determine if there is a simple way in which to identify and then practically apply testing methods for clamping force and friction through utilization of existing testing equipment.Three separate methods of clamping force and friction determination have been tested in rear drive unit, RDU, at a 30 Nm assembly torque. A fourth and final method, screw elongation with ultrasound, has been used as reference. The methods are:?Torque-Tension test.?Screw elongation with micrometer.?Joint stiffness test.?Screw elongation with ultra sound for reference.The results from tests can be viewed in table below.MethodTorque-TensionMicrometerCs=318 kN/mm Assembled with torque wrenchMicrometerCs=318 kN/mm Assembled on lineUltra-soundCS=311 kN/mm Ultra- soundCS=318 kN/mm Joint stiffnessTheoreticalClamping force-21,8 kN17,6 kN17,3 kN17,6 kN17,1 kN17,3 kNFriction-0,110,1470,1530,1470,1520,149.

Due to higher standards of living around the world, greater industries and larger infrastructures causes an increase of the global energy consumption. This harvest of energy puts a great stress on the global environment. With this development, it becomes increasingly important to utilize energy resources in the best possible way.Fans are components that are often used in the industry and in households. A common problem is that the fan is oversized. An oversized fan causes an excessive flow, which has to be adjusted in order to achieve the correct flow.

Earlier investigations showed that damages on timber from feeding rolls could be within the lower classes of damage according to VMRs classes. Knowledge about differences in productivity between kind types and aggressive types of feeding rolls is necessary because it should influence the question about damages on timber caused by different feeding rolls. In this study the production and timber damage in a harvesting head were evaluated at three levels of pressure (8, 10 and 14 MPa) on the feeding rolls, and with three different types of rolls. One type, the rubber cushioned steel plate roller had 10 mm studs and rubber damping, one ?middle? type made of solid steel with 14 mm studs, and one aggressive type, also made of solid steel with 18 mm studs.

The problem being examined is the disturbing noise that is created in an open plan office on a company working with a creative process, such as a newspaper or a communications agency. The purpose of this study was to examine the needs for today for a sound absorber in open offices and create and design a design proposal. The aim is also to develop a marketing material the product proposal. The problem has been broken down into the following questions:- How does the user look at the need of a sound absorber in an open offices solution today?- Does an interior designer apply sound absorbers when they furnish the intended environment? - How can a design that meets the needs that exists be achieved and to speak the user?The study is based on three choice of methods a literature review on selected topics that relate to the topic, an interview with an interior designer to explore how an interior designer applies absorbers in open plan office and finally an extensive survey that treats the user's needs and appropriate appearance for the product proposal.The design process has undertaken the following methods, design brief, requirements specification, functional analysis and sketches to produce the final product proposal.

This thesis investigates how the level of implementation of New Public Management affects an organization?s efficiency. According to theory, a high level of implementation leads to a more efficient organization. This thesis is based on two case studies conducted on two units within Stockholms Stad. One of the units shows a high level of implementation of NPM and a high level of efficiency.

Studien visar att en positiv onormal avkastning uppstår i och med att kungörelsen av ett noteringsplatsskifte offentliggörs. Den positiva onormala avkastningen återgår från och med det fysiska skiftet till OMX från de mindre noteringsplatserna. En temporär värdeutveckling som stöds av Price pressure hypotesen och som förklaras av handelsvolymförändringar i aktien..

Syftet med mitt examensarbete har varit att skriva, arrangera och spela in musik till Tritons kommande debutskiva, Beneath Our Feet. Arbetet besta?r av tva? delar, en skriftlig del da?r jag redogo?r fo?r dels en sammanfattning av den fo?rberedande kursen 2012, som legat till grund och mo?jliggjort mitt arbete. Dels ocksa? huvudarbetet under 2013 da?r jag i egenskap av projektledare, producent och musiker genomfo?rt den studioinspelning som utgjort va?rt ma?l.Den andra, konstna?rliga och klingande delen av mitt arbete gestaltas av de 8 la?tinspelningarna jag tillsammans med Triton a?stadkommit i Studio 2 pa? KMH..

Sahlgrenska Academyat University of GothenburgDepartment of Internal Medicine and Clinical NutritionTitle: Can nutritional support contribute to the healing of pressure ulcers in elderly patients?Author: Anton Kinnander, Sandra SmidelikSupervisor: Elisabet RothenbergExaminer: Anna WinkvistProgramme: Dietician study programme, 180/240 ECTSType of paper: Examination paper, 15 hpDate: 12-04-11Background The number of elderly patients with co-morbidity is increasing in the western world. It is therefore reasonable to predict increasing incidence and prevalence of pressure ulcers. One study, published 2009, found that as many as 59 % of geriatric patients within the Swedish health care system had developed pressure ulcers. Symptoms vary from mild erythema to severe deep tissue damage and development of pressure varies from hours to weeks.

Our essay is about the grammar structure that the participants in A- and B- level of a school in the middle of Sweden, in the subject, Swedish as a second language, process. We have collected written productions from an A-level group and a B-level group and made a comparison between them morphologically and syntactically according to the processability theory by Pienemann.Processability theory was applied to Swedish by Pienemann & Håkansson (1999), with five steps in syntax and four steps in morphology. It turned out that the B-level group had much higher processing level of grammar than the A level group and one of the reasons for this can be that grammar is explicitly taught during the first year of studying Swedish as a second language in the school we have chosen to study..

The aim of this work is to give an example of how archaeoacoustics can broaden our understanding of archaeological remains and to further contribute to the almost non-existing research of ringing stones. With a theoretical discussion about sound from three different perspectives and by means of using different kinds of analysis, this essay will show that there are unknown relations between the three known ölandic ringing stones and the cultural landscape of Öland. Possible patterns in the placement of the stones and the possibility of the sound in this soundscape will be investigated. The essay will also suggest a resonant stone typology and discuss the necessity of one. Finally, the intention is also to shed new light upon the discussion on what the uses of the ringing stones might have been..

In the 1980?s the moose population in Sweden grew explosively due to big changes in the silviculture with clear cuttings instead of single-tree selection. Clear cuttings brought big areas of young forest and therefore a lot of fodder in one place. Since this change, the discussion about how to manage the moose population has grown into a very big problem. Forest owners think that the population needs to be strongly reduced because of all the damage that is done to the young forest when the moose seeks its food, and the economic losses because of that.

As I recently started to record in a studio, I almost immediately came to the conclusion that getting the right sound is not easy. I became curious about my recording procedure. What did I do wrong? How to place the microphone? Use of equipment? How is it possible to modify the sound afterwards? Are there any special methods that are commonly used among producers and/or guitarists? My thoughts ended up in a question ? What do producers and guitarists think of the guitar sound during a recording session in relation to the final production? In my research I interviewed two producers and two guitarists about guitar recordings. The results show that the quality of the guitar sound is in relation to production and style of music.

The aim of this study was to investigate patients? experiences of pain during dental hygienist treatment and scaling. The study is based on a questionnaire and includes 129 patients, from four dental clinics in Skåne, Sweden. The questionnaire consisted of ten questions with a Visual Analogue Scale as a main question. Questions about age, gender and dental anxiety were also included.

To fence in pastures for sheep today is a major cost, especially because of the time required when using current methods. What takes most time is starting to fence off a new area, but to maintain a fence is also a continuous effort. The main function is to keep the sheep at the field.! !By interviewing and observing sheep farmers on how they work with fence today and what their problems was, I got a better understanding of the problem. Also looking at a number of other things like the context, statistics on sheep farming, laws and competition mapping gave a wider image. But the most important part in my research occurred when I talked to experts about sheep behavior.