This report is presenting an approach that can be used to measure water surfaces in difficult conditions caused by dense vegetation and lack of nearby known points. The objective was to make a contribution to necessary measures for adaptation against floods in Grums Municipality along the stream Karlbergsån, which may occur when persistent rain raises the level of the stream. Along the river there are low-lying areas prone to flooding. According to Grums Municipality, the stream may widen where the water level differences are large, to create a better flow path and to counteract flooding. Grums Municipality was also interested in survey stormwater discharges which may affect the water level in the stream.

This thesis deals with different methods for measuring moisture-related dimensional changes ofwood. Typically relative humidity is measured to determine if the ambient climate around anobject is harmful to it or not. Values between 40 to 65% RH are recommended for hygroscopicmaterials. To know how a wooden object actually reacts to changes in the surroundingenvironment requires methods that involve the object itself. Because of the wood anisotropy,differences in wood structure, finishes and other restraints, it is not always possible to predict themovements.This paper addresses various measurement methods, primarily methods that have been testedin the field of conservation, with examples of their use.

Today's urban centers become denser, which contributes to higher demands on sound and noise. It is therefore highly relevant to build homes with good sound environment while maintaining living space. This thesis aimed to reduce the current concrete walls and see how the mass law affects the reduction index value and flanking transmissions. Handmade calculations were calculated according to the Swedish standard SS-EN 21354-1, where only air sound was calculated.Calculations we­­­re performed on wall elements with different weights and thicknesses, and compared with results from Bastian.In Bastian calculations of flanking transmissions were also made, this was made to see the impact of the flanking transmission when changing the mass per unit area. Mass law's impact was examined by flanking transmission and the result shows that they are not affected as long as the ratio between the thickness and the density remains the same.A questionnaire survey was conducted to determine the actual sound experience; this questionnaire was conducted on three concrete buildings in Växjö.

NCC has given us a commission to investigate a planned housing area in Haga, Karlstad, situated close to the traffic route Hagaleden and the railway. The housing area consists of one hundred apartments in five different houses. The houses are linked to each other by balconies with glass panels. A long carport is situated between Hagaleden and the housing area to absorb part of the noise from the road. The design of the housing area is creating a silent backyard.

This report describes an investigation of the indoor climate in two different workspaces. Since we a big part of our lives are staying indoors in artificial environments, and more particularly in our workplaces, we think it would be interesting to do this investigation. The technical solutions for air treatment systems began with simple natural systems without fans and where the thermal rise of the air applied. In modern time is technical air treating systems used to take care of the fresh air supply. This type of units can supply filtered air with the right temperature to the building. Well-functioning ventilation is essential to bring clean fresh air to the room and effectively remove impurities without sound- or draught problems. The indoor climate is relevant for the output capacity.

In this paper, a navigation support approach for speech-only interaction based on auditory icons for room-based designs is presented, i.e. naturally occurring sounds that have a natural mapping to the system's underlying design metaphor. In contrast to many recent investigations that have focused on multi-modal or augmented reality systems, this paper concerns a unimodal speech and sound-only system. An auditory icon based prototype system for buildings maintenance support using a room-based metaphor was developed. The design was evaluated in a comparison with earcons and no-sound designs.

At the Department of Technology and Built environment at the University of Gävle there was an interest to study GNU Radio, which is an "open source radio project. The project is based on that most of the radio signal processing is made in an ordinary PC. The idea behind this degree project was that in a laptop there are several radio transmitters/receivers that takes space, generates heat and transmit in varied frequency band etcetera. All these radio transmitters/receivers could be replaced with a Software Defined Radio system. It means that one common, general radio hardware is used to different communications such as: WLAN, Bluetooth, GPRS, 3G etcetera. The waveform is generated in the software, which makes the system very flexible.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

A system for sampling of alcohol and aldehyde from diluted exhaust gases from vehicles powered by ethanol has been developed and tested. The major part of the work has been research of earlier work in the field and the construction of the sampling system.The part of the system constructed for the measurement of alcohol has been shown to work, however, more test should be performed. The part of the system constructed for the measurement of aldehyde was tested parallel to a commercially available system, based on the same principle of measurement, and has been shown to work well.Determination of the concentration of gaseous ethanol using a FID has shown the since earlier known fact that a FID is not able to measure a correct concentration of ethanol. Furthermore it has been shown that high concentrations of gaseous ethanol can not be kept in a bag more than a few minutes without a substantial decrease of the measured concentration..

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

This thesis concerns how the power quality in the grid is affected by the connection of wind power plants. As things are at present, Fortum Distribution AB has a number of wind turbines and wind parks connected to the own grid. As the pressure on building and connecting additional wind power is increasing, so is also the interest of how the already existing wind power generation affects the power quality in the nearby distribution grids. The study is performed by direction of Fortum Distribution AB and is limited to the 10 kV/40 kV-grid in Bohuslän, Sweden. The methods for calculation of power quality are compared to the results of a number of measurements.

AbstractThe project "Sound and Play" have been implemented in collaboration with the toy company BRIO in Malmo. The purpose of the project was to examine whether and how BRIO in the future could develop toys around sound for Toddlers.The problem formulations that would be answered after completion of the project was "How could BRIO broaden its product range with the help of audio toys?", "How can you combine toys and sounds in an interesting way for children?", "How do you create a toy with sound that is fun for the child, but not annoying for parents?". Currently BRIO only has two toys with sound in this age group.The expression of the toy was going to be a mix of classic and cool and the overall feeling of the toy was going to be explorative and arouse curiosity in the child. This feeling would be communicated through simplicity and joy.

The banking industry is a fundamental part of the economy in Sweden. Despite its importance, the competition and the concentration level within the Swedish banking sector is relatively unexplored. This paper aims to examine the development of the concentration level in the Swedish banking sector during a period of ten years, 2003 to 2013. The examined banks in the study are the four largest banks in Sweden; Handelsbanken, Nordea, SEB and Swedbank, and four selected niche banks, ICA banken, Ikano Bank, Länförsäkringar Bank and Skandiabanken. In order to examine the development in percentage change, there are six selected variables; loans, deposits and borrowings (both public and households), net interest income and return on equity, which are observed during a period of ten years.