Detta arbete är sekretess belagt under de närmaste två åren och därför kommer bara sammanfattningen att publiceras för tillfället..

Företaget Radius Control Systems AB sysslar huvudsakligen med utveckling och underhåll av SCADA applikationer. Radius hade önskemål om att kunna visa väderinformation från en väderstation i Radius egna övervakningssystem Uni-View. Detta skulle ske via ABB: s styrsystem AC 800M/ 800xA, med en PM856 processor. Arbetet handlar om att upprätta kommunikation mellan en PLC och väderstation, och från PLC vidare upp till Uni-View. Rapporten behandlar hela arbetsprocessen med början från en prototyp till ett fungerande system.

Background: Bone anchored hearing system is a surgically implantable system for treatment ofindividuals with hearing loss. The Softband is intended for patients who can benefit from a boneanchored hearing system but who are not yet suitable for implant surgery.Objective: The aim of this study was to investigate whether an adhesive bone conductor, Adjoin, canbe used as an alternative to Softband.Material and Method: Twenty adult subjects with normal hearing participated in the study.Measurement of functional gain and speech intelligibility was performed with Softband and Adjoinwhich then were compared. A questionnaire was answered by the participants after the measurementsthat treated their subjective experiences with each option.Results: The objective measurements yielded no overall difference between Softband and Adjoin forthe group studied. The subjective results showed differences in the perceived comfort as well as whichof the two bone conductors that would be preferred to use in everyday life, with Adjoin being thepreferred option. No difference was detected on participants perceived gain, sound quality and speechintelligibility.Conclusion: Based on the measured results, Adjoin seems to be a suitable alternative to Softband.However, there are questions about how Adjoin works with long-term use..

The Master of Science in Energy Systems Engineering program at Uppsala University started in 2000 and 221 students has graduated since. This master thesis aims to answer what competencies alumni considers most important for successful professional practice. It also seeks to find out how these competencies are reflected in the program to identify potential gaps between importance and how the competencies are being prepared. With inspiration from similar research a method has been developed consisting of two steps: (1) A survey and (2) interviews with alumni. The alumni survey rates the professional importance of 13 competencies and how well the corresponding competency is prepared in the program.

The title of the paper aims at a comment by one of the students during an interview. It reflects how most of the students experience the lunches in a specific school where the investigation is made. The question of pedagogical lunches has always interested me. Here I have used a method called the Grounded theory. I carried out a qualitative investigation with a number of methods such as interviews and participating observations.

Tinnitus is the perception of sound in the absence of an external source. 10-15 % of the population is experiencing tinnitus. There are different causes such as damage to the inner ear, musculartension and stress. Tinnitus affects many different aspects of an individuals life and often disturbs everyday activities. There are different treatments for tinnitus.

This thesis describes redesign and adaption of a products housing. In order to make it more economical to produce at a lower production volume. The thesis is based upon a prototype that a previous student developed for injection moulding. The goal is to find alternative manufacturing methods, but also to identify parameters that affect the cost of the injection moulding tool.The housing must be tough in order to protect the circuit board inside. But at the same time it must allow sound, light an electrical communication to pass through.

Detta examensprojekt innehåller olika frågeställningar gällande hur några av Sveriges främsta hårdrocksproducenter arbetar. Eftersom hårdrock är Sveriges andra största musikgenre när man talar om den svenska musikexporten idag 1, måste det finnas något unikt med de producenter som arbetar med denna genre i Sverige, bortsett från att vi har bra artister, musiker och låtskrivare här. Är det samarbetet mellan artist och producent som gör att en skiva låter bra, eller kanske är det den nya digitala teknikens förtjänst att det går bra för svensk hårdrock? Detta är några av de frågor som kommer att behandlas i projektet.Projektet kommer även att innehålla intervjuer med olika hårdrocksproducenter i Sverige och deras syn på de frågeställningar projektet inkluderar, vilket vidare resulterar i en analys av intervjuerna och producenternas sound. Dessa analyser kommer att vara kopplade till en framställning av viktiga saker man bör ta i beaktande vid musikproduktion av hårdrock.

This paper presents the result of a master thesis project at 30 Hp, master of industrial engineering at Luleå University of Technology. The project was performed during 20 weeks, spring 2014, in collaboration with ABB Control Products in Västerås. The aim of the project was to evaluate two half-automated assembly lines for a new generation of contactors, the NAFC assembly lines (New AF Conductor). The aim and purpose of the project was achieved by answering the following questions:? How are the ergonomic working conditions at the NAFC assembly lines during spring 2014?? Which areas at NAFC assembly lines can be improved for the work environment?? How can the ergonomic work conditions improve at the NAFC assembly lines?Literature reviews were performed from earlier research papers and articles of the ergonomic, musculoskeletal and work environment subject, from where a number of chosen methods and tools were used to perform the ergonomic evaluation.

Detta arbete är en magisteruppsats i Systemvetenskap med inriktning data och systemvetenskap, 10 poäng, vid Luleå Tekniska Universitet. Uppsatsen klargör vilka faktorer som avgör en användning eller icke-användning av Case-teknologin. Case-teknologin möjliggör ett ingenjörsmässigt närmande till mjukvaruproduktion och systemutveckling genom att tillföra nödvändig systematik, standardisering, automation och kvalitetssäkring. Ett stort antal undersökningar är gjorda genom årens lopp med syfte att förstå och förklara varför det som teoretiskt borde vara lösningen på problemet med undermåliga system inte tycks ha blivit detta. Resultatet av undersökningen tyder på att de variabler som Prekumar och Potter kom fram till i sin forskningsmodell ? relativa fördelar, kostnad, komplexitet, kompabilitet, produkt förespråkare, stöd från ledningen och operativ expertkunskap har störst påverkan på användningsbenägenheten av Case-teknologi..

It's an everyday experience shared by many that nature can be of help in relieving pain, reducing stress, support mental recovery etc. In the last three decades or so this experience has also found support in a large number of scientific investigations. Among other things the experience of nature has been shown to reduce stress and pain in patients and to boost concentration and reduce impulsive behavior in children. Most of this research however has mainly been concerned with the visual modality. In this thesis the aim has been to focus on the auditory modality in this context by trying to reveal some effects on people from the exposure of nature sounds played indoors in three different environments: a grammar school class room, a kindergarten play room and a post-surgery wake up room at an intensive care unit.

The aim of this thesis is to describe and compare the cataloguing rules for sound recordings: the rules used by a specialised archive and common libraries respectively. We will put the rules in relation to purposes (the objectives of a bibliographic system) and principles (directives that guide the construction of a bibliographic language). The first question to be answered is in which way the set of rules used by a specialised archive differ from the one used by common libraries. The second question examines if and how the differences can be derived from purposes and principles. The sets of rules studied are KRS (chapter 6) and the Swedish version of the IASA Cataloguing Rules (1999), worked out by the National Archive of Sound and Moving Images (SLBA).

The purpose with this report is to illuminate the construction solutions and the deformations that could exist in medieval parish stone churches. But also to increase the writers understanding how activity forces effect the construction of the churches. With help from literature and a practical study, containing three churches the writers have collected the material that the conclusions and discussions are built upon in this report. The construction of the churches consists of three parts, the wall, the roof and the vault. The construction solutions are similar in the churches disregard of the roof, where the roof trusses are different.

My research interest in the upcoming paper is the increased need for promotion of schools. I. e. the individual school´s needs to be able to show its existence, in the huge flow and availability of information; schools and universities, study circles, streamed lectures on the Internet, public schools and private schools, different educational directions, et cetera. The schools? needs to market itself, make good PR and sell their pedagogical idea, and that has become increasingly important. My purpose is to clarify how music teachers, in the Swedish primary and secondary school, skills and competences are used in outreach activities within but also outside, the school premises.

In this report a systematic working procedure for risk classification of processing equipment from a maintenance point of view is described. How this system has been worked out is also an important part of the report. The classification system is adapted for use in complex processing plants. Preemraff Göteborg has been subject for the underlying study and application of the system.The system aims to give a good overview of the maintenance related risks at the plant. Furthermore, the analysis result is a good motivation for the suggested maintenance activities and as motivation for extended or decreased maintenance resources in total.