The product structure of the fuel tank installation is one of the most complex product areas at Scania. Caused by the number of parameters, which affect the fuel tank installation, a product structure is created which is very difficult to handle. Knowledge exist that the structure in a nearby future will be considerable more complex. The purpose of the study has been to understand in why this complexity exist and find ways to break the trend of a growing product structure. The goal was to achieve a more standardized fuel tank installation.A theoretical study was performed in order to bring knowledge in relevant areas both in general theory but also in documentation at Scania.

These days most companies conduct some form of work for the external environment, quality and safety. In connection with this work, some companies have chosen to get management systems certified by any applicable standard for one or more of the fields while other companies have chosen other ways that are not associated with certification.In light of the fact that the individual systems are becoming unmanageable an increasing number of these companies are faced with the decision whether to integrate and coordinate these different systems or not. In order to study the possibilities of a company?s system coordination an assessment of elements particularly interesting for the company was performed. The key elements and focuses in the evaluation were staff access to information, experiences from other companies and environmental work status for some of the organization's companies.

Construction companies in Sweden have for recent years seen an increase in the numbers ofwarranty complaints associated with the market of resident buildings and the cost for this hasbeen measured to over 1.2 billion SEK per year. Working with poor quality cost as a way ofcreating insight about defects within the company?s processes is a method developed and usedby the manufacturing industry for decades, but have not yet reached the construction industry.This study has been performed in collaboration with a Swedish construction company, wherethe author has been stationed at the aftersales division for residential buildings. Owing tocircumstances, this published report has been made anonymous regarding the company whowill further on be namedthe Company. The Company is aware that warranty claims producegreat costs and has requested a way of putting cost and cause to specific claims in order ofreceiving a more specific cost view and to make the reuse of knowledge more efficient.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

This rapport contains an examination of the energy consumption of a kindergarten, which areas that have the largest impact on the energy consumption and what can be done to reduce those areas in ways that are relatively easy and profitable. It is also analyzed if it is possible to reduce the energy consumption from today?s consumption to a consumption that fulfils the demands placed on low energy houses by FEBY.The focus has been on reducing the energy consumption of the areas ventilation, heating system and hot water system, since those seemed to be the easiest ones to affect and since the building is quite recently built.There are different kinds of ventilation systems, at the moment the building have a CAV-system, which means that the ventilation is too high during large parts of the day. There are different ways to manage the ventilation system, for example presence detection, humidity sensors, CO2 sensors, temperature sensors and season adjustment. Many of those are in the end dependent on CO2 sensors to guarantee a good indoor climate, therefore the focus have been placed on this system.

Construction companies in Sweden have for recent years seen an increase in the numbers ofwarranty complaints associated with the market of resident buildings and the cost for this hasbeen measured to over 1.2 billion SEK per year. Working with poor quality cost as a way ofcreating insight about defects within the company?s processes is a method developed and usedby the manufacturing industry for decades, but have not yet reached the construction industry.This study has been performed in collaboration with a Swedish construction company, wherethe author has been stationed at the aftersales division for residential buildings. Owing tocircumstances, this published report has been made anonymous regarding the company whowill further on be namedthe Company. The Company is aware that warranty claims producegreat costs and has requested a way of putting cost and cause to specific claims in order ofreceiving a more specific cost view and to make the reuse of knowledge more efficient.

This exam paper has been a collaboration between the writers and SYSteam Utvecklingspartner in Huskvarna. The assignment was about finding a need for a mobile application, making a requirement specification document with design documents and parallel to this constructing a prototype. The assignment is summarized in the following questions:? How can companies in the forest industry benefit from mobile information technology?? How can a user centered perspective be used in the process of making the requirement specification document and the design documents?? How do guidelines for usability apply to a mobile application?Three visits to companies in the forest industry were made to find a need for mobile information technology Solutions. After a small analysis of the different companies? problems and conditions the decision was to use Tenhults Impregneringsverk AB in the case study.We used the FA/SIM method in our job of finding the organization needs for change and the principles of User Centered Design in the work of constructing a prototype.The result of our work is a requirement specification with design documents and a prototype.

AbstractThe Municipality Council decided in 2010 to develop a comprehensive energy efficiency strategy with financial and methodological support from Energimyndigheten (The Swedish Energy Agency). The strategy should include 3 major parts: an inventory of the 2009 energy use defining the current situation, the 2014 and 2020 goals for energy use, and an action plan for goal achievements. According to Energimyndigheten, the strategy must include all municipal administration premises, vehicles, and all majority-owned companies (as Laholmshem, the municipal housing company).The report describes the inventory work in order to obtain the 2009 energy use and the sources of information used. The inventory values are used as the base year values for the 2014 and 2020 goals. The inventory showed that information about the vehicles is dispersed in the municipal administration and no clear structure exists with respect to mileage and fuels used.

This Master?s thesis is one of two parts of a combined project called Sustainable development around the Lake Victoria, the purpose of which is to investigate the importance of local anchoring and active participation in the work towards sustainable development. The present study aims to investigate whether men and women are empowered by the participatory rural appraisal (PRA) process promoted in their villages by the VI Agroforestry Project Masaka/Rakai. The study is primarily based on interviews with farmers within the project area and brings up a local perspective on the concepts sustainable development, active participation and empowerment. The study shows that to improve the farmers? livelihood and to create a sustainable development in the community, the farmers have to be actively involved in, and in control of, the process.

The essay depicts the opposite views of the director and an actor during the filming of a specific scene in a feature film. The actor feels that he is not being listened to. This leads to unforeseen consequences for the director, as the actor no longer wishes to take part in the marketing of the film prior to its opening night. Everything is seen from the director?s point of view, she is working in a film world dominated by men.Questions are being asked if the director?s instructions are clear enough or if the actor, fearing getting lost, is mixing up his own feelings with those of the character he is portraying? What happens to the collaboration and how does it affect the rest of the team and the completion of the production? The director is also the producer.

This thesis has treated a three-axis robot which task is to serve a larger test machine tomove the modules to be tested, from the storage to the test site. The robot is composed ofthree linear actuators; two standard components of ball screw type and a custom-builtactuator of trapezoidal type. The work has mainly focused on the custom-built device to seeif it could be replaced with a standard component. Part of the work has been to look into thepicking tool and to see if there are any possibilities to improve its function.The report presents two different proposals which I decided to call Robot 1 and Robot 2 andthey aim to address the problems arising in the purpose-built linear unit and the X-axislinearity problems. Robot 1 focuses on eliminating the problems that arise around therobot's X-axis, with such simple means as possible and without making excessive materialchanges.

The review of Integrated green spaces in urban areas ? A case study of inner Brisbane highlight the significance of addressing characteristics, qualities and landscape values in our outdoor environment. The importance of green spaces to the wellbeing of people in the city and the ecological, social and cultural values they carry are widely recognised in the field of urban and regional planning. At the same time population growth, climate change and urban development put planners and scientists in a challenging position where new Solutions must be put on the agenda in order to accomplish sustainability. Open space strategies, collaboration between stakeholders, public participation, learn from earlier failings and a ?value-led? approach facilitate the managing of open space. Brisbane is located in the fastest growing metropolitan region in Australia. The city´s open space landscapes offer cultural, geographical, recreational, social and scenic amenity assets, which make a major contribution to the regions identity they a wide world known for.

The poultry red mite, Dermanyssus gallinae, is a common problem in poultry facilities, causing great discomfort for the hens and effecting the production economically. Few efficient acaricides are available and there is a need for new control methods since resistance has become a problem in some cases. The aim of this study was to evaluate the efficiency of the new liquid silica control agent Ectopar, on the poultry red mite. An initial in vitro test of Ectopar and its two components individually was performed, where live mites were sealed in together with filter paper impregnated with one of the three Solutions prepared. The survival of the mites was thereafter recorded repeatedly during a period of 120 hours and compared to a control. For the field study, two poultry farms with different housing systems were used, one with furnished cages (farm 1) and one with a single tier floor system (farm 2).

This master thesis is an early concept development project about using plastic films and sheets as materials for shaping openings for Tetra Pak packages. It is also a technical introduction highlighting the areas of importance for the development of plastic film and sheets openings. The master thesis has been carried out as a co-operation between Chalmers University of Technology, KTH Royal Institute of Technology and Tetra Pak AB.The master thesis study presents an introduction that gives an understanding of the technical complexities and design possibilities of using thin plastic films and sheets in liquid carton openings. The knowledge is then transferred into five design concepts which points out the areas of opportunity. The technical introduction is widespread and extensive covering current packing trends, the liquid carton package and openings, thermoplastic material properties, and thin film and sheet manufacturing and shaping.

Introduction: Public health researchers have long been focusing on investigating health inpopulations through determinants such as income inequalities. Nevertheless, incomeinequalities can be considered an effect of the organization of welfare regimes. The publichealth status is largely affected by the organization of welfare regimes and consequently thereare large differences in health within and between welfare regimes. How are these differencesdistributed and how can they be explained?Aim: To compare health between welfare state regimes with the use of Esping-Andersen?swelfare regime typology and to investigate the relationship between welfare statedeterminants and health.Methods: A literary review based on 12 scientific articles.