On some occasions it may be inappropriate with a cameraman behind the camera. In somecases there is no cameraman available or it is a smaller event, like a family celebration, to befilmed. It can also be difficult for a cameraman to shoot from certain angles. One Solution forthis kind of situations can be to remotely control the camera movements. There are thosekinds of Solutions on the market today but they either address professional filmmakers or thefunctionality is limited, for example by the absence of wireless remote control.This project aims to develop a Solution to the problem with absence of wireless remote controland also a Solution with more flexibility and less complexity than today?s Solutions.

The thesis is about exploring possibilities for developing a standardised system Solution for micro businesses, this since most of the micro business lack proper system Solutions, a contributing factor of this is price and also incompatibility between the Solution and the business itself. The system Solutions we will refer to are Solutions which task is to cover the most important needs that a micro business might have on their system. The main goal with this research is to see if this is possible, and if so, how the developers should think to take it further. We chose to do this by identifying the most significant of needs a micro business has when it comes to this type of system Solution.In this thesis we will present three needs which were evaluated and brought forth through the analyses of various interviews and observations we had done during the study. The interviews took place at respective company with their employees and consisted both closed and open questions with our main focus on the open questions because we wanted to obtain as much information from the respondents as possible from several viewpoints.

The project is a practical and theoretical test of IP telephony with Skype in order to form a base for a comparison between IP-Telephony with Skype and the Public Switched Telephony Network (PSTN). PSTN is the common standard that most of us use for telephony today. The objective for the study is to simplify the choice between PSTN and IP-Telephony for the Swedish private customer user group. The project is supposed to answer the following questions. - How easy is it to start using IP-telephony with Skype? - How is the quality of IP-telephony compared to PSTN? - Are all services provided by PSTN available and accessible using the IP-Solution? - How are the usability and the availability of support with IP telephony? - Is IP-telephony a cheaper Solution and in that case under which circumstances? Within the project a collection of practical and theoretical tests have been performed to be able to form an opinion on the IP-Solution in the following areas, installation, function, quality, usability, costs, accessibility and security. In order to study usability, a test group of ten persons have been used to evaluate the usability of the system.

The aim of this project is to find a concept Solution for a wireless transmitting system, installed to transmit data from a hydrophone of the ocean floor down by a wave power generator to the office on shore. The project is a literature review in which previous observations and tests are analyzed and put together to find a Solution. The result was a comprehensive Solution that includes an acoustic modem to transfer captured information from the bottom to the surface, wirelessly through the water. The information is then sent fron the surface on radio waves through the GSM network to the office on land. Between under and over water there are components to convert information between acoustic waves and radio waves, but also various types of modulation, such as amplitude and frequency modulation is required..

Title: Information storage - A growing problem? Authors: Göran Svanhall Pär Truedsson Erik Ponnert Tutor: Bengt Carlsson Problem: Every day companies, regardless of size, produces new information that needs to be stored. In the information society of today, the characteristics of the information changes both in size and complexity. This results in higher demands on which storage Solution that suits the company and their field of business. New and more innovating storage Solutions enters the market, but are they necessary to smaller companies of development active in the IT society? Questions to Answer: Is data storage a growing problem for companies of development active in the IT society? How do traditional storage Solutions manage the information growth of today? How urgent is the need of a new storage Solution? Which features are prioritized in the future storage Solution? Method: By performing a quantitative survey we delivered an inquiry to several companies, which answers will help us answering our above mentioned questions.

This degree project is on 15 university points which correspond to 10 weeks full time studies. The work has been carried out during autumn term 2007 and spring term 2008. This degree project has been carried out with the cooperation of Etac Supply Center AB who is located in Anderstorp.It?s been Etac interest to develop a Solution which helps the user of the wheelchair over obstacles. My task has been to develop a concept that solves the problem according to the requirement specification.In the rapport the reader can follow the development from an idea to a finished concept.

Every year more than 6000 thefts, to a value of 1.5 billion SEK, are reportedwithin the Swedish building trade. Plus all the indirect costs of having theconstruction site standing still.SafeTool is a newly started company that will try to prevent this problem witha modern technology Solution.The key to SafeTool?s Solution is RFID ? Radio Frequency Identification ? andthe Solution looks like this;All tools are stored in a container on the construction site. Every tool isequipped with a RFID-tag that uniquely identifies the tool. With antennas in thecontainer it is possible to detect when a tool is leaving the container and whenit comes back.

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation Solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed Solution.This pilot study has resulted in a suggested automation Solution using laser as a heat source for soldering. Calculations of the Solution show that a automating a laser soldering cell is very profitable..

The company LightLift Esystems AB manufactures patented motorized lift systems for the illumination of halls with high ceilings. The company wants a new design for singular heavy lights in order to be more competitive.This project consists of the development of the new design under the requirements and specifications imposed by the company. The new design must support lights up to 300kg and keep the overall dimensions as low as possible without modifying the driving unit.This document contains all the designing steps followed to reach the final Solution as well as the material selection, manufacturing process and assembly of all the parts that form it.The Solution obtained shows to be very competitive with other alternative products, since this new design triples their maximum load capacity while the dimensions are very similar.In this context, the optical appearance was also very important to the company and so it was another main objective of this project. From an aesthetical point of view, the final Solution proves to be very compact and versatile since it can either be hidden behind a false ceiling or covered by a plastic case that gives the design a very nice look.Finally, the Solution achieved fulfils all the requirements and specification previously imposed. It is reliable, compact, cheap to manufacture, easy to assembly and it has a good optical appearance. .

This examination work is about implementation of Cisco Systems Network Admission Control (NAC) within a leading IT-company in region of Jönköping. NAC is a technique that is used for securing the internal network from the inside. NAC can verify that the client who connects to the network has the latest antivirus updates and latest operative system hotfixes. Clients who don?t meet the criteria can be placed in quarantine VLAN where they only have access to the update servers.

Abstract (in English)During the last fifty years, the waste in an average Swedish household has increased by about five hundred percent. In order to manage (eller take care of) all of this new waste, Swedes need a method of facilitating the handling process. In this report, both the habits and needs among private households across Sweden are investigated, followed by a pertinent Solution to the waste problem. This Solution is a container with two compartments, using the standarddimensions of a grocery store paper bag..

Title: Information storage - A growing problem? Authors: Göran Svanhall Pär Truedsson Erik Ponnert Tutor: Bengt Carlsson Problem: Every day companies, regardless of size, produces new information that needs to be stored. In the information society of today, the characteristics of the information changes both in size and complexity. This results in higher demands on which storage Solution that suits the company and their field of business. New and more innovating storage Solutions enters the market, but are they necessary to smaller companies of development active in the IT society? Questions to Answer: Is data storage a growing problem for companies of development active in the IT society? How do traditional storage Solutions manage the information growth of today? How urgent is the need of a new storage Solution? Which features are prioritized in the future storage Solution? Method: By performing a quantitative survey we delivered an inquiry to several companies, which answers will help us answering our above mentioned questions. Conclusion: The consulted companies experience no growing problems what so ever regarding their existing storage Solution..

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation Solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed Solution.This pilot study has resulted in a suggested automation Solution using laser as a heat source for soldering. Calculations of the Solution show that a automating a laser soldering cell is very profitable..

This Master Thesis is a product development project that has been carried out incooperation with Metso Paper Sundsvall AB. The task has been to develop a holdingSolution that generates force between two rolls and to evaluate the new Solution withrespect to functionality, manufacturing, structural stability, costs, assembly etc. Theroll holding Solution is a system that is part of a rollpress. The rollpress is used towash and dewater pulp. The existing Solution creates forces that have to be absorbedby the gable of the press.

Today's communication Solution between the vehicle and trailer is one many see as anon-viable Solution, then breakdowns on both the lights and cables are common. Now, anew innovation enters the market, a system that can transmit wireless control signalsbetween the vehicle and trailer.Parvus and Zap, the two Solutions that the projekt group has come up with during thisthesis work carried out over the last year on Utvecklingsingenjörsprogrammet.Technologists Peter Jägevall and Christopher Åberg has developed this project on theirown. The group has developed various concepts and chosen to work on, two of them.The project has resulted in this report and a prototypeThe Solution that the group has developed is a wireless communication between vehicleand trailer. The project team has developed new power-efficient LED lighting fixtures inorder to implement an internal power source in the trailer. The result of this has becomea maintenance-free and wireless product to trailers.