This master thesis has been performed at Sectra Communications AB in Linköping where they manufacture electronic encryption devices. In cryptology it is essential that an eavesdropper cannot find the plain text. To assure that a system is safe, all devices are thoroughly examined so that they don?t emit any secret information, so called Compromising Emanations (CE). This is done by comparing the secret signal with measured signals on the screen of an oscilloscope, a process that is very time consuming and furthermore, the risk of missing compromising emanations is high.

I denna rapport har vi utforskat olika metoder som löser handelsresandeproblemetmed hjälp av rumsfyllande kurvor. Vi har utgått från en klassisk algoritm av Bartholdioch Platzman och förbättrat den med avseende på lösningslängd med två egna algoritmer.Vi har under arbetets gång utvecklat programvara som använder dessa algoritmer.Vi har undersökt körningstid, lösningslängd och stabilitet för de olika algoritmerna ochanalyserat resultaten. Rapporten innehåller även en inledande teoretisk beskrivning avplanfyllande kurvor och NP-komplexitet..

Scania?s discount rate - the return requirement of investments - refers to Scania?s WACC or weighted average cost of capital. The capital markets return requirement on equity and the credit market interest cost of borrowing is weighted to become the single discount rate, the WACC. The purpose of this study is to investigate which asset pricing model of APT and CAPM Scania should use in their WACC calculations. The company now uses a group WACC of 11 percent which is used in all company levels.

Forest biomass is becoming an increasingly important source of renewable energy, and thereby the demand is increasing. There is currently 213 000 km of forest roads in Sweden that could be suitable for biomass harvesting. Harvest of biomass along forest roads both provides biomass and maintains the quality of the roads. Currently, the volume of biomass along roads can only be assessed post harvest, chipping and industry deliverance. As the decision of whether or not to harvest should preferably be based on more than experience, the TJ-method has been proposed. The TJ-method is a subjective method to quickly determine the dry matter quantity with the assessment being conducted from the roadside.

The purpose of this study was to increase the understanding of the phenomenon that there are so many young people placed in institutions in Sweden despite the valuable knowledge regarding the problems and risks of doing so. The questions that follow in the essay were what guided the social workers to choose institutional placement for youngsters. It went on to also ask if this knowledge could contribute to an increased understanding of why there were so many young people placed in institutions despite the criticism from scientists. To accomplish the goal of the essay, former science in the subject was reported and six social workers within social services were interviewed. The material of the interviews was analyzed with help from the theory of human service organizations, street-level bureaucrats work situation and the new institutionalism.The result of the investigation showed that the social workers choices to place young people in institutions is guided by specific work and organizational factors connected with a belief in the helping function of the surroundings.

Fallstudie: Swedbank Syfte: Syftet med denna uppsats är att undersöka hur ett varumärke kan framställas inom tre olika kontexter. Denna studie kommer att fokuseras kring aktörerna företag och konsument inom den interna företagsmiljön samt den fysiska och virtuella tjänstemiljön.Metod: Studien utgår från en etnografisk metod, där vi studerar och deltar i olika miljöer. För att erhålla datainsamling utfördes intervjuer, observationer samt dokumentanalys. Teoretisk referensram: Vi kritiserar traditionella brand management teorier kring företagets roll vid varumärkesskapande. Vi presenterar istället brand consumptions teorierna, eftersom dessa framhäver att varumärke skapas utav fler aktörer.

This thesis was conducted at AB Fredr Wagner in Ösmo in Nynäshamn, Sweden.AB Fredr Wagner provides solutions for the graphic industry and has been asked by acustomer to develop a product that can simplify handling of EUR-pallets, namely amechanical arrangement, further called pallet exchanger that can switch from anempty pallet to a fully loaded one using only hand force.The goal with the thesis was to create design documents for a pallet exchanger, andalso from those documents to manufacture a prototype for testing and evaluation.A field trip was made to the customer, IKAB mailing in Huddinge, where the palletexchanger is thought to be placed. The purpose of this field trip was to get an insightinto the current work condition and need of change, as well as to gather informationregarding the requirements when it comes to size and robustness of the palletexchanger. Existing equipment on the market that can perform similar tasks werestudied in order to find an optimal solution for the actual pallet exchanger.After the field trip and gathering of information the concept generating phase began.The method used for generating concepts was brainstorming. To decide on whichconcept to use, a concept selection matrix was created. The selection criteriaincluded in the matrix came from the requirements for the pallet exchanger.

In conjunction with today?s increasing competition within the construction sector, more pressure is being placed on building contractors. Efficiency and improvements are necessary but without impairment to an ergonomic and safe construction site. This in is in order to reduce the construction costs and time but to retain the ability to deliver a high-quality contract.Various methods and prefabrication degrees are used, depending on the project's requirements and conditions. This analysis sets out to investigate and exhibit what qualifications are important when choosing a construction method for curtain walls.Advantages and disadvantages with each method have been analyzed and recommendations have been given to show when different methods are best suited.

The purpose of this project has been to cut production costs for the fascia panels ofGetinge?s largest autoclaves. The cost for the stainless steel plates currently used is veryhigh. An alternative material solution could cut costs significantly.In addition, improvements have been made to the instrument tower which is a central partof the fascia panel. As a result of the new modular design in a new material theinstrument tower has been improved in several aspects..

Competition in the market of interior design during the last several years has drastically increased. The consumers of today are very conscious about what the market can offer and therefore they have high demands on the products. It is not only the function of the product that matters but also the design that makes a difference. Companies are becoming more aware of this and as a result they have to find a way to set themselves apart in order to attract customers. This realization has led designers and economists to cooperate in a different way than before.

Amongst the published literature researching wet cleaning of paper there is a limited amount of studies conducted researching the method simmering water treatment. There are even less studies conducted on how simmering water affects the paper being treated when used as a cleaning method. Despite the limited research, there are literary reviews describing the method and suggesting it as an alternative for conservation of paper with iron-gall ink. The following study will therefore be examining, the somewhat unusual method, simmering water treatment, and comparing it to one of the more common wet cleaning methods: immersion washing. This is done to compare how the different temperatures of the water affect the paper. The types of paper used in this study consists of three dyed and four undyed papers. All of the papers are new, apart from one sample originating from 1847.

The aim of this essay is to examine why and how three teachers who work in elementary classes choose to use ability grouping during math lessons and what they think of ability grouping as a method to individualize the activities according to the pupil?s needs.I chose one main question for this study that is the following:What is the teacher?s point of view and experience of ability grouping in teaching mathematics?And three sub-questions:What are the motives behind the choice of ability grouping?What are the advantages of ability grouping?What are the disadvantages of ability grouping?In order to be able to answer my questions, I used the qualitative method. I interviewed three teachers who work in the elementary classes (First to fifth grade) to find out what they think about ability grouping and how it is experienced in mathematic teaching.The result shows that the common thing between these three teachers is that they don?t use ability grouping as the only teaching method. They all agree that the whole class teaching has many benefits for the pupils.

This thesis is an investigation of Iranian immigrants and their use of libraries in Sweden. It isbased on a combination of a qualitative and a·quantitative method.Using a qualitative method, I give an outline of the history of lran from ancient times up to the present, as well as the different ethnological groups in Iran and their cultures. The main objective of this part is to clarify the contrasts between Iranian and Swedish cultural, social, linguistic and family structures, and also the characteristics of the crisis that most immigrants go through on their arrival in the new country. The qualitative method also involves structured telephone interviews with eight highly educated Iranians.This method was supplemented by a quantitative study through questionnaires of the attitudes· of lranian immigrants to libraries and reading. Iranians in Sweden turned out to be frequent Iibrary users.

The aim is to examine teachers own experiences of leadership, leadership styles and what good leadership is and to find out how teacher leadership can influence students according to teachers. My questions are: How do teachers evaluate leadership and their own leadership styles?What is good leadership according to teachers?How can the teachers leadership styles affect students in the classroom according to teachers?The method used is a qualitative method based on interviews with five teachers. The reason why I have chosen a qualitative research method is that I believe that this method can give me better results by understanding the world from the interviewees? point of view.I have come to the conclusion that the interviewed teachers believe that leadership and management style play a large role in the teacher's profession and that the teacher's leadership style in the classroom democratic or authoritarian have a major impact on students. The teacher should consider his management and find some sort of balance by exercising both democratic and authoritarian leadership style and adapt it to the situation. And In terms of results regarding good leadership of the interviewed teachers, I can say that good leadership is largely about good relationships between teachers and students and that a teacher can become accepted as leader by winning students confidence..

This thesis assignment at C-level is focused on calculation models and prediction methodswhish can be used in the stage we call ?prospecting? of possible windmill locations. Thelocation is southeast of Halmstad at the Farm ?Stjernarpsgods?. The rapport has two mainareas directed towards this task.