The aim of this essay is trying to understand the ideological changing process over the last decades and the ideological meaning of the relatively new conception lifelong learning as well, and how it comes that the opportunities offered the individual pre-school child and the individual compulsory-school pupil to assimilate the so important learning, differs so dramatically all though the expressed ambition to offer each and every one equal opportunities. What are the ideological structures that are, and have been in function, that carries and have carried the perceptions of the use and value of fostering and education?In a time with the welfare ideology in a hegemonic position, it was seen important that the state took major responsibility for the education of the citizens. In our time, it appears, an economist ideology has taken the hegemonic position, and education is becoming an increasingly economic issue, and equality is decreasing along with, as in general society, the increasing of segregation within the educational system..

AbstractInformation and information seeking have always been important parts of society. How behavioural patterns of information seeking manifest themselves are partly due to individual prerequisites and partly due to the practice where the seeking of information is conducted.The aim of this study is to investigate a group of newly examined physicians? experiences of information seeking behaviour in their educational practice and in their professional practice. The two practices are related to each other but still very different. This makes it interesting to study whether individuals? information seeking behaviour changes when they move from the educational practice to the professional.The theoretical framework for the current study is a socio-cultural one.

The purpose of the study is to find out how some teachers in Kenya reason about children in need of special support. To undertake the study the following question are used:How do some teachers in Kenya reason about children in need of special support?The study has been made with qualitative interviews in Kenya. A total of four teachers at primary school level have been interviewed. The decision to do qualitative interviews is made by the opportunity to get as comprehensive answers as possible from the respondents' reason about children in need of special support.Three different kinds of special education perspectives have been used in this study.

This reportcommunicates the processes and results of my degree work in industrial design at candidate level at Umeå Institute of Design.During my degree work I had a cooperation with Svenska Jägareförbundet (Swedish Hunters Assosiation).The aim for my project has been to explore how I could make hunting a safer hobby and undertaking. Every year people get seriously injured and in average 2 people a year dies  due to hunting accidents. My goal is to identify problems within the hunters communication and approach. Through a creative design process I will find a valid  nd realistic solution to these problems. My project will be presented as a conceptual solution  hat will be based on currently existing technology.

This report is an attempt to clarify how religious and non-religious views-of-life [livsåskådningar] are created through the collaboration and opposition of religious and scientific elements/ideas. This with the hope of reaching a fruitful result related to the solution of world-view related conflicts, such as the ones existing between science and religion, on an individual and societal level.This is accomplished with the help of two assertions: (1) Mankind has a need to explain its existence and surroundings. (2) Religion and science has their origins in the same seed and aim to serve the same purpose, or function. Together these two assertions lay the theoretical foundations of this report which implies that all humans have an innate need of sustaining a stable world-view.The result of this report is that a final solution to world-view related conflicts are beyond reach as our mental and physical nature limits us. However there are strategies for minimizing world-view related conflicts effect on society..

Since the 1950s new laws on higher education have led to a ?mass education phenomenon? in Sweden. This has led to a surplus of people with a university degree measured against available positions on the labor market. As a result of that development it must be assumed that in this over qualified society it is not anymore the degree but additional factors which are decisive for getting a job. In this respect the importance of the class background for getting a jobb that is equal to once level of education shall beexamined.The research was carried out by means of a Quantitative Analysis based on data from anational database called Undersökningar av Levnadsförhållanden (Survey of LivingConditions).

Detta examensarbete undersöker om det behövs en chaufförsutbildning för nyanställda inom transportbranschen med avgränsning till Poståkeriet och vad som bör ingå i en sådan. Arbetet tar också upp vikten av kunskap inom kundrelationer för chaufförer och företaget. Det finns även ett förslag på upplägg för en utbildning samt en stödlista för utbildande chaufförer..

The goal of the project was to create an extension to Internet Explorer forStatens Tjänstepensionsverk (SPV) which would give the staff the experience ofSingle sign-on (SSO) to external web service providers as well as manage andupdate their passwords in a secure manner. The survey focused on the providersPalasso, ProCompetence and Wera. The extension was created as a BrowserHelper Object (BHO) with C# in .NET. The solution was implemented as aCOM object in a DLL-file that was running in-process with the browser. Theprogram used a locally stored XML file containing URLs, usernames andencrypted passwords to the providers.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The purpose of this study is to examine how well the teaching of physical education meets the needs of a future life in the building and construction industry. In order to answer the survey's purpose, we have carried interviews with teachers for the subject Physical education and health as well as with teachers for the Building- and construction program in order to through their experience gain understanding of common health problems in the profession, but also to gain a deeper understanding of the importance of the subject Physical education and health for this profession. We have reported and described previous research and then analyzed it during our processing of collected data material. The result of the interviews showed that the teachers as far as possible are trying to adjust the lessons to suit this practical program. They also indicate several aspects to consider in order to further customize the education for students in the Building- and construction program.

The constant need of energy is something that affects us all no matter our current situation. Whether we are driving our car to work, taking the elevator or using the oven to cook dinner we end up relying on energy. Our whole society is continuously striving to achieve a higher grade of efficiency and the process of supplying ourselves with energy is no exception. The importance of appliances in our everyday life cannot be exaggerated and thus the importance of their high efficiency.Efficiency is already a keyword in the appliance industry with labels, stars and numbers helping us choosing the most suitable option for the task ahead. No matter how efficient appliances often use pure electricity as their energy source.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.