This report describes a Bachelor thesis work in which a robotised laser welding cell has been modelled and simulated for the purpose of making a presentation movie. The report shows that the work has been concentrated on making the movie from the modelling phase through the recording of the movie and ending up with the editing of the final presentation movie. A pre-study was made prior the Bachelor thesis work. In the pre-study a literature study was conducted about measurement and calibration of a welding cell. Measurement of almost all equipment in the entire cell was also conducted in the pre-study.

This is a qualitative study about Art transformation and commodification in the digital age. The study applies a rhetoric analysis with the aim to understand how art sellers, gallery owners and entrepreneurs take part in this transformation process through their websites? presentation texts ?about us?. The analysis is related to communication theories but it is also inspired by other theories such as Gramsci?s hegemony theory and Bourdieu?s cultural critical theory.

This thesis discusses the concept of Corporate Social Responsibility, which means that companies are taking a voluntary accountability towards the society with a view to improve it. Today's stakeholders and people in general have higher demands and expectations on businesses and its products or services than before. This is driving more and more companies to consider questions like voluntary responsibility so that they can maintain public confidence. Confidence towards the banking sector is particularly important to avoid financial crises. Our study focuses on leadership impact on CSR.

Approximately 20% of the milk within the udder of a cow is stored in the cistern and immediately available for milk removal, while activation of the milk ejection reflex is required for removing the remaining milk stored in the alveolar compartment. The aim of this literature review is to describe, evaluate and consider implications of the three different suckling activities that the calf displays during a suckling bout. In terms of milking, these phases are represented by pre-stimulation, stimulation during milking and post-stimulation. Pre-stimulation is commonly performed in order to induce the milk ejection reflex, whereby the hormone oxytocin is released and the alveoli in the secretory tissue are contracted. Time requirements regarding pre-stimulation must be considered in relation to lactation stage and milking interval.

In this final thesis, an existing method for analysis of chlorophenols (CP) in bottom sediments has been updated and adjusted for analysis of chlorophenols in soil. The covalent bonds between the chlorophenols and the soil matrix were broken through basic hydrolysis and the chlorophenols were then separated from the water phase through addition of sulphuric acid followed by ether extraction. The chromatography was improved through extractive acetylation of the chlorophenols.The updated method was then applied on soil samples from a contaminated area (a former sawmill in Hyttsjö, Östergötland, Sweden).The analyse was preformed by GC/MS with respect to 2-MonoCP, 4-MonoCP, 2,4-DiCP, 2,6-DiCP, 2,4,6-TriCP, 2,3,4,6-TetraCP and pentachlorophenol (PCP).Contamination of chlorophenols in nature can be explained by the former use of wood preservative chemicals based on chlorophenols. In the 1960s and the 1970s these chemicals were used in Sweden, but due to their toxicity they were banned by the Swedish government in 1978.In Hyttsjö a pentachlorophenol-based product named Santobrite was used for several years. The concentration of PCP in the soil samples from Hyttsjö varied from 0.2->1.8 ng/mg dry substance.

This thesis work is made by Torbjörn Johansson on Karlstad University for Uddeholms AB. The assignment in this thesis work was to investigate tough cutting in three different tool steels: Vanadis 4 Extra, Vancron 40 and Sverker 21. The research was to compare the wear of the tool after cutting in each one of the tool steel alloys. The research was also made to see if the tool cutting in Vancron 40 has a better wear than the tool cutting in Vanadis 4 Extra and also compare the results with Sverker 21. All three of these alloys are a part of Uddeholms AB:s range of products, and is used in applications like forming tools and knife tools. Vancron 40 is a powder steel with a very good combination of mechanical properties like ductility, adhesive strength and hardness.

2014 is a special year in Sweden: for the first time elections to the European parliament and the national elections coincides, creating a"Super election year". This year has also seen the rebirth of an old way of campaigning: door-to-door canvassing. For the first time in 50 years the two biggest political parties, the Social Democrats and the Moderate Party, have decided to create a campaign based on personal meetings with the voters in their own home. To investigate this old-new way of campaigning, this study presents an overview of the history of door-to-door canvassing in Sweden and the research in political marketing associated with the phenomena. Based on that, a new model is constructed to help analyze and map the Swedish canvassing-campaigns.

The topic of this essay is information seeking for children and young people in municipal libraries. This is based in the growing need for information seeking skills in the Information Society. Policy documents on the topic are scrutinized and related to a concrete praxis. Data has been collected through two case studies; one carried out in Ronneby and one in Trandared, Borås. These cases where chosen because of the existence of a local policy for library skills and information search for 6 to 12-year-olds.

One of the most commonly used methods for analysis of polyphenols is the Folin-Ciocalteu (FC) method, where the FC reagent has been reported to interfere with some substances in fruit juices. The interfering substance that is present in the highest amount in most fruit juices is ascorbic acid. In this study, the total phenolic content (TPC) of three fruit juices was analysed by the FC method as well as with an enzymatic method with hydrogen peroxide oxidoreductase type II (HRP) for comparison. To investigate how the interfering ascorbic acid affects the TPC, juice samples were analysed after removal and addition, respectively, of ascorbic acid. The samples were analysed with HPLC both before and after the extraction phase of the FC method.

A study was carried in conjunction with the Orthodontic department at Halmstad General Hospital in Sweden to investigate the possibility of reducing cost and manufacture time of dental implant drill guides. The current system involves sending a digital image in STL format to the Materialise factory in Belgium where information of the position of dental implants is translated onto a moulded mouthpiece. Drill guides are placed in the mouth piece which is then returned to the surgeon. The mouthpiece complete with drill guides is then placed in the patients mouth and used as a guide for the implant drill holes. The cost of 10000 sek and a turnaround time of 2 weeks gave rise to the need for a faster and cheaper solution.

The aim of this undergraduate thesis was to explore how the welfare officers at palliative units in Stockholm respond to the patients? thoughts and experiences during the last phase of life, as well as exploring their picture of the patients experiences. The research questions of the study were:? How do the welfare officers relate to the patients? experience of their death? ? In what way do the welfare officers respond to the dying patient and his or her experiences?? What knowledge/experience do the welfare officers have and what knowledge/experience do they consider is needed in their profession?To answer the research questions a qualitative method was used where five welfare officers in three different palliative units were interviewed. The empirical material was analysed through meaning concentration and are presented using exact quotations.

In the EU the amount of waste increased by 14 percent during the years 2000 to 2010. EU?s target to reduce waste generation runs parallel with the aim of increasing the efficiency and profitability aligned with energy recovery. In Sweden the energy recovery through incineration is increasing steadily, and 46 percent of the municipal solid waste (MSW) is treated by combustion. This report aims to examine the profitability of processing MSW into Refuse Derived Fuel (RDF) from an economic-, energy- and environmental perspective.

As a part of the fight against the global warming the energy production needs to be more efficient and redirected towards sustainable options. One alternative is cogeneration, which means that electricity and heat is produced in one plant. The purpose with this survey is to examine if there are any commercial available combined heat and power techniques, based on combustion of solid moist biomass, which are suitable to small-scale applications. The technique must be able to produce between 2 and 10 MW thermal and the heat demand is a Swedish district-heating system. When already published reports had been studied, the Organic Rankine Cycle (ORC) was chosen as the most suitable technique.

Rapporten ingår i ett FoU- projekt för Högskolan Dalarna, där målet är att ta fram en konstruktion utan ångspärr som ska klara dagens mått på lufttäthet och fuktkrav.Syftet med denna rapport är att utreda hur fukt påverkar en byggnad medmassivträstomme och olika isoleringsmaterial utan ångspärr. Mineralull och träfiberisolering jämförs mot varandra för att se hur dessa påverkarfuktbelastningen i en väggkonstruktion. Testobjektet är lokaliserat i Dalarna, inget fukttillskott har funnits inomhus i byggnaden.För att genomföra detta arbete har tre stycken olika metoder används. Ensimulering, verkliga uppmätta värden och en provtagning. Fuktsimuleringen genomfördes med hjälp av programmet WUFI, uppmätta värden i form av relativ fuktighet och temperatur har samlats in kontinuerligt under två års tid från väggkonstruktionen via mätsensorer.

In 1999 the childbearing increased, which in combination with the closure of a number ofpreschools led to the shortage and reduced capacity in available places for youngchildren. The lack of places in preschools has led us to try to find a solution to theproblem and in order to solve the problem we have interviewed personnel of preschoolsin Halmstad. The persons we met were asked to list advantages and disadvantages oftheir preschool and also to come up with innovative solutions and new ideas of how todevelop a satisfactory preschool. This was the basis for us when we drew our drawingsand our main objective was to find a new template for the development of pre-fabricatedpreschools.When drawing a new and modern preschool a number of considerations have to be made,first of all the main objective for the children is play and playtime, a second objective issound reduction and laws about sound reduction. Another consideration is how toconstruct the building and which method to be used, for instance should industrialtechniques be considered and pros and cons be listed.The main disappointment amongst the preschool personnel was that they had noinfluence in the planning stage of the new development of the preschool.