The aim of this bachelor thesis is to through a theoretical analyze, investigate the conditions and the challenges for a consolidated democracy in Egypt from 1952 until after the revolution of 2011. The central question in this thesis is what opportunities and challenges are there for the democratic consolidation in Egypt, with respect to civic, political and economic conditions. How have the conditions developed between 1952 and 2011? How has the transition government/military government handled the central problems in the transitions phase after 2011? The theory used in this analysis is Linz and Stepans famous five arenas (the political society, the economic society, the civil society, the bureaucracy and the state of rule, whit focus on the three first). Through a qualitative case study we have analyzed the conditions in Egypt from 1952 to after the revolution 2011.The empirical material shows that the arenas in Egypt are both historically and current very weak, and they are not supporting democratic consolidation as they are challenged by several enormous problems.

Fortum has in a pilot project installed metering equipment with wireless communication in secondary substations in Stockholm. So far, the collected data are used only in specific projects.This master thesis was carried out at Fortum Distribution AB in Stockholm during 2013. The purpose of this study is to simplify and enhance the use of data in for example network planning process, by giving suggestions on how data can be managed and giving examples of analyzes that collected data can be used for.The electricity meter which Fortum has installed is a EDMI-Mk10A which is set to measure max/average/min values with a one hour time resolution of the following parameters: voltage (per phase), current (per phase) andactive power and active and reactive energy.In order to analyze the collected data an analysis tool is required. During this thesis two customized tools in Microsoft Excel have been developed, one for sorting data and one for analyzing.One aim of the thesis is to show examples of what collected measurement data can be used for. This work shows an example of analysis of active power, power factor, voltage, occurrence of interrupts and the relationship between outdoor temperature and power.This master thesis has among others resulted in the following advice: Expand the number of secondary substations with measuring equipment.

Haptoglobin is an acute phase protein with important biological role because of its capacity to bind to haemoglobin. Haptoglobin exists in three major genetic polymorphism types: Hp1-1, Hp2-1 and Hp2-2, the distribution of which has been associated with abdominal aortic aneurysm (AAA), an asymptomatic aortic disease common among men older than 65 years.    Five different electrophoretic methods were tested according to their ability to separate the haptoglobin phenotypes. The detection was based on a produced hemolysate of blood in which haemoglobin binds to haptoglobin thereby forming a complex that can be detected by specific haemoglobin staining using TMB-dihydrochloride and hydro peroxide as substrate resulting in an azure-green color of the bands. Samples from 15 patients who had suffered surgery for not broken AAA, that is more than5.0 cmaortic diameter, and 15 samples from matched controls were analyzed.    Among the five tested electrophoretic methods best migration and separation was seen on the pre-cast agarosgel Hydragel HR on the instrument Hydrasys. The other four methods gave less successful results.

An emerging trend within the construction industry is the expectation of the customer to experience and sense the product, maybe even in a customized manner. The latter trend would extend the necessity of incorporating not only function and aesthetics, but also perception and sensation. To meet this trend while at the same time improve the productivity the use of information technology such as BIM and technical platforms has increased in construction projects. Nevertheless, in spite of large investments, the construction industry has not managed to increase the effectiveness and productivity as much as other industries. Evident is that successful use of information technology depend on the integration and collaboration of various experts in a continuous and dynamic process.

The purpose of this study was to evaluate enantioselective analytical methods by separation of the enantiomers of four drugs (citalopram, zopiclone, tramadol and methylphenidate) and their metabolites. The analyses were performed with HPLC-UV with columns whose stationary phases were based on macrocyclic glycopeptides (Chirobiotic V, V2 and T) and polysaccharides (Lux Cellulose-1, Cellulose-2 and Amylose-2).The Chirobiotic V column showed high selectivity for citalopram and its metabolites. High resolution was obtained using a mobile phase consisting of methanol, acetic acid and ammonia. High selectivity for the enantiomers of zopiclone and its metabolites were obtained on the Cellulose-2 column using a mobile phase consisting of acetonitrile and ammonium acetate buffer.The enantiomers of tramadol were separated with the Amylose-2 column. However, changes in the pressure arose, probably caused by the additive NH4HCO3.

3D-modelling in AutoCAD This thesis is done in cooperation with LB-Hus in Bromölla, and have aimed to establish a digital AutoCAD model of one of the company?s house types and to find out what opportunities there are to do visualisations in the form of images directly from the programme. Modeling has been carried out so that the very construction of the house is included. Interiors and installations, with the exception of the ventilation system, have been left out in the model. The model has been created with solid models after a comparative study made between solid models and surface models to find out which option in this case was the easiest to handle and took up the least space.

 Denna uppsats undersöker två läroböcker avsedda för gymnasiets A-kurs i engelskämnet, Progress Gold A (2003) och Solid Ground (2003), i syfte att se vad de kan kommunicera ur ett genusperspektiv. De frågeställningar som behandlas är följande: Hur konstrueras genus i texterna i dessa båda läroböcker? Då läsaren inkluderas exempelvis i ett "vi" eller "du", förutsätts läsaren då vara antingen man eller kvinna, eller har detta inte någon betydelse? Hur förhåller sig resultaten till läroplanens mål om jämställdhet?Den teori och metod som ligger till grund för analysen har hämtats från det fält som kallas diskursanalys. Såsom den utformats i detta arbete kan metoden närmast beskrivas som en kvalitativ närläsning av materialet. Resultatet visar på att båda läroböckerna till stor del tycks reproducera genuskontraktets grundpelare, dikotomiseringen av manligt och kvinnligt samt hierarkin dem emellan som ger det manliga högre statuts än det kvinnliga.

This study concerns mapping and analysing two different Supply Chains at Setra Group. Setra Group is Sweden?s biggest producer of solid wood and is primarily owned by Sveaskog, Mellanskog and LRF. The Company consist of twelve sawmills, five planning mills and an organisation for distribution of building material. This study maps one chain for Swedish Glulam standard beam and one chain for solid pine flooring on export to Japan. The glulam chain is based on spruce as raw material and includes all actors between sawmill and the Swedish building material retailers.

The purpose of this work is to develop and test a design process where quick decisions and model building has a prominent role. The goal is to develop a number of products and build prototypes to be shown during the Carl Malmsten Furniture Studies spring exhibition 2012. I?m also writing a report describing my work.To reach my goal I have each day during the first phase conducted a short research and found a concept based on that days name day. Then I have continued in the workshop and worked with three-dimensional models.

The aim of this study was to quantify the productivity and the costs of different harvesting systems (teams), containing harvesters equipped with accumulating harvester heads and forwarders, in first commercial thinnings were an integrated harvest of pulpwood and energy wood were performed. In the beginning the plan was to study and measure 20 sites before and after harvest. Due to storms during the summer of 2010, complete data could only be obtained from 8 of these 20 sites. Seven of these sites were privately owned and one was owned by UPM, all of the sites had been pre-commercially thinned. The mean stem density before harvest was 2578 stems per ha and the mean stem volume was 0.074 m3solid over bark.On average 1518 stems/ha was harvested.

The assignment is issued by Scania Maintence AB seeking a new approach to detect power changes in their industrial processes. The work has taken place at Ångströmslaboratoriet and tests have been performed at Scania AB Södertälje.Today?s society consumes enormous amount of energy. In both economically and environmental view, it is important that the processes are effective, with high power factor. There are many ways to measure power in the industry, what they all have in common is that the installation is advanced, requires time and planning.

Large amounts of phosphorus (P) are lost from the arable land due to water erosion. Both phosphorus attached to particles and dissolved phosphorus (mainly phosphate) are transported away with drainage-water and surface runoff. Good soil structure is important in minimizing these losses. In this study, soils from 50 fields were analysed with respect to aggregate stability as measured by dispersion of clay together with the content of total phosphorus (TotP), particulate phosphorus (PP) and phosphate phosphorus (PO4P) in the water phase. All soils were clay soils with clay content varying between 21 and 54%.

Concrete floors have traditionally had no problems with annoying vibrations. However with the demand for larger spans the floors need to be made more slender with a higher degree of utilization and lower mass. Therefore new floors may have problems with vibration serviceability. This thesis studies the vibration characteristics of hollow core slabs. The analysis was made in the finite element program Ansys. The hollow core slab was subjected to a varying force simulating one person walking across the slab.

Stockholms vattenskärning AB in Kungsängen has through the acquisition of a company begun to design and produce aircraft heaters whose origin is early 1970s which follows a high inefficiency in terms of energy consumption and size.The aircraft heater, which is sold worldwide, serves its purpose for customer satisfaction and has done so ever since it was developed in the 70s.Stockholms vattenskärning AB is now investigating the possibility in making the aircraft heaters more efficient, both in terms of energy consumption but also on a more efficient design with the belief that it would lead them to an edge in the market. The aircraft heater consists of several main components whose function altogether is to keep passenger aircrafts warm while they are on the ground.This project has been limited to the further development of the heat exchanger package which accounts for the conversion of the hot medium to the fresh air being carried in to the aircraft cabin. Work has been divided into different phases in order to create a better understanding of the project range and to make it easier to divide the various elements in the time available, 10 weeks. These phases are literature review, situation analysis, concept generation, CAD, concept comparison and writing reports.After the initial literature review was made, a fundamental theory was written which is essential in understanding the remaining parts of the project.With the theoretical part as support, measurements and calculations were made on the current heat exchange package in a situation analysis to ensure its operation and efficiency.In the concept generation phase, the collected facts from the literature review was used as the basis for creating a matrix. The purpose of the matrix was to indicate the two most suitable types of heat exchangers to develop four new concepts out of.In the CAD phase the four concepts was drawn up and then described with text and images.The last phase is the concept comparison where a concept selection matrix is used to function as a decision basis for further production at Stockholms vattenskärning AB. The four concepts have been developed based on the current heat exchanger and is gradually changed into a design of a cross-flow heat exchanger constructed out of stainless sections. The purpose of this is to have gradual upgrading of the heat exchanger as an option, in order not to saturate the market..

pcSKOG-gård is a computerised manager plan for private forest owners, developed by the pcSKOG AB. The program is based on forest stand data, joined with a map of the forest and GIS-applications. The purpose is to offer a program for private forest owners managing the forest and with the possibility of updating the actual status of the forest. The company pcSKOG AB is the leading producer of programs for forest management and has developed the program since 1997. The program is currently the most common program used by private forest owners in Sweden. The aim of this thesis, leading to MSc in forestry, is to investigate the purpose of the private forest owners when purchasing the pcSKOG-gård. The thesis also studies how private forest owners use the program, what they use it for and how the private forest owners state that the program has achieved to fulfil their expectations. The thesis is also a market research concerning the knowledge and attitudes the private forest owners have about the program and associated services. The study material has been collected during two phases.