The aim of this study is to describe and analyze the history and the current situation of the Church of Sweden. The renovation of Skalljö church in Lerum municipality has been used as an example to enlighten the common changes in the church buildings. The long history of the Church of Sweden as the state church has resulted in the fact that it carries a remarkable part of the Swedish cultural heritage. The reason why the Heritage Conservation Act (1988:950) was altered in January 2000 was due to the change of relations between the State and the Church of Sweden. According to the Act, all church sites owned or managed by the Church of Sweden shall be maintained in such a way that their cultural historic value is not diminished and their appearance and character are not violated.Sweden is today considered to be a secularised country where religion is an individuals? private matter.

After the fall of the Berlin Wall in 1989 the satellite states of the former Communist bloc immediately departed on a journey towards democracy and market capitalism. Among the many tasks of the newly elected governments, one was to transform the paternalist Communist welfare state into a social system that would decrease the oversized role of the state, at the same time as protecting the citizens from the hardships ensued from the transition.I have studied the evolution of new welfare systems in the Czech Republic, Poland and Hungary, three countries generally agreed as the most similar and most successfull transition countries of the Eastern bloc. Gøsta Esping-Andersen's prominent typology of welfare regimes, consisting of the liberal, corporatist and social democratic regime-types, has constituted the theoretical basis of the analysis. Simultaneously, applying new cases to the typology implies an element of theory testing.The study shows that 40 years of Communism and partial isolation from the West has not prevented these three countries from developing welfare states fully compatible with those of Western Europe and the Anglo-Saxon nations and that all three of them in fact fall within the scope of the corporatist regime-type..

Bipolar disorder is a severe, affective illness which causes a person to alternate between episodes of pathologically elevated mood (mania) and depression ? in between these episodes the mood is normal. The length and intervals between the episodes are highly variable among the ill, as are the severity which is divided into two major subgroups: bipolar I and II. Bipolar I disorder is the most severe because of the patient?s inability to realize that he or she is currently in a manic phase, in the case of bipolar II disorder, the patient is aware that he or she has an abnormally raised mood, a state which is called hypomanic state instead of manic.

Denna rapport presenterar ett examensarbete som handlar om en konceptstudie för en monteringscell. Examensarbetet har genomförts av Oskar Edström, student inom maskinteknik på Umeå Universitet, under våren 2013.Syftet med arbetet har varit att utveckla en lösning för hur en bussning, som används i Volvos lastvagnar, skall monteras ihop automatiskt i en produktionscell. Arbetet har genomförts i samarbete med uppdragsgivaren HT-Svarv i KalixFör att definiera befintliga problem med dagens konstruktion har förstudier, med kartläggning av företagets behov, genomförts. HT-Svarv vill ändra hur bussningen monteras ihop. Detta för att få kortare operationstid under processen och minska behovet av personal vid montering.

Henric Schartau was the prominent figure in a Christian revivalist movement thatspread mainly in south west Sweden during the 19th century. Priesthood followers in thetradition, commonly named Schartauans, often preached from his drafts, and were generallyvery loyal to the state church. Schartau and his followers placed a strong emphasis onministry and correct biblical teaching. The movement had a great impact on the diocese ofGothenburg for a protracted time period..

Denna rapport presenterar ett examensarbete som handlar om en konceptstudie för en monteringscell. Examensarbetet har genomförts av Oskar Edström, student inom maskinteknik på Umeå Universitet, under våren 2013.Syftet med arbetet har varit att utveckla en lösning för hur en bussning, som används i Volvos lastvagnar, skall monteras ihop automatiskt i en produktionscell. Arbetet har genomförts i samarbete med uppdragsgivaren HT-Svarv i KalixFör att definiera befintliga problem med dagens konstruktion har förstudier, med kartläggning av företagets behov, genomförts. HT-Svarv vill ändra hur bussningen monteras ihop. Detta för att få kortare operationstid under processen och minska behovet av personal vid montering.

Tankevärldar och förhållningssätt i särskolans musikverksamhet av Liselott Stenman, är en studie inom ramen för Magisterprogrammet i musikpedagogik med profil musikterapi vid Kungl. Musikhögskolan i Stockholm.Bakgrunden till denna studie står att finna i min tidigare erfarenhet som musiklärare på en särskola med skolverksamhet för barn och ungdomar med diagnostiserad utvecklingsstörning samt funktionshinder. För några år sedan gav en elevsituation upphov till frågor kring förhållningssätt hos personalen på denna skola, vilket väckte mitt intresse för fenomenet förhållningssätt. Denna studie söker därför svar på hur fem informanter med olika anknytning till särskolans musikverksamhet tänker kring fenomenet förhållningssätt. Syftet är att belysa frågan på ett individuellt plan för att erhålla fördjupad kunskap om tankar runt förhållningssätt inom denna verksamhet.

The Nord Stream natural gas pipeline has been a controversial project. The debate was primarily escalated by Poland's strong negative reaction to the project in the spring of 2006 over safety and security and then alternated back and forth in Europe until the approval by the nations most concerned in the Baltic region during the autumn of 2009.In the case study an approach is used that primarily maps out the media image of the various viewpoints that deal with the pipeline and how these viewpoints position themselves, primarily through political and environmental dimensions. Simultaneously there?s an attempt to map out the spatial spread of the media image views as to the proximity and distance to the pipeline in Sweden, Poland and Germany. A key question is whether distance or proximity to a large facility can affect people's attitudes.A parallel focus of the study is to explore the role of the Nord Stream natural gas pipeline in the cross-border hinterland region of Szczecin-?winouj?cie.

There are many old dams in Sweden and, since few dams are constructed today, the main task in risk assessment on the existing dams is often to reduce the risk of failure. RIDAS (Swedish Guidelines on Dam Safety) is used when designing new dams and assess the existing ones. The guidelines include stability requirements for different failure modes, e.g. overturning and sliding, which imply that the load effect from e.g. uplift and ice load need to be less than the resisting loads or moments.

This thesis aims to investigate if peer-groups based on industry classification perform as well as, or better than, peer-groups based on other measures that represent factors affecting the price-to-earnings multiple. In contrast with previous empirical studies, a solid theoretical approach is used in defining which factors, according to valuation theory, affect the P/E-ratio. The factors identified as explanatory are accounting measures, risk and growth. Furthermore, we have recognized several measures that represent these factors. These measures are tested for accuracy of prediction in terms of the P/E-ratio for peer-groups based on these measures relative to an industry classified peer-group.

The sun is an endless energy source and the heat it produces can be used to heatup our homes. This technology is relatively old and was introduced in the late70-s. There are two kinds of solar collectors that are most frequently used todayand these are plain solar collectors and vacuum solar collectors. The plain solarcollectors are the once that are used the most but the vacuum solar collectorshave increased more as a percentage the last couple of years.The biggest question asked regarding an investment in solar heating is if theplant is economically profitable. This question has no direct answer because itis dependent on a couple of prerequisites.

At Saab Aerospace in Linköping, components for measurement systems to the fighter aircraft JAS 39 Gripen are developed. In this activity you sometimes want to record the traffic transmitted on the data busses that connects different sys-tems. This traffic on the data busses is using the military standard MIL-STD-1553. This project has aimed to create a system for recording and sending 1553-data. The system is used on an ordinary personal computer, equipped with a recon- figurable I/O card that among others has a programmable logic circuit (FPGA).

Today small metal parts are mass-produced as for example rollers in cylinder bearings. At high velocity cutting the metal is cut with a great force in a scissor-like device. Both precision and repeatability is important to be able to guarantee good quality, but from an economical point of view it is also important to keep a great manufacturing capacity. The part of the process that is most time consuming is when the metal bar, that is about to be cut, is fed to the right position. Therefore it is interesting to examine if the time used for positioning can be reduced.

This study is based on an inductive approach where the collected empirical data has been categorized in themes on which we have based the discussion in this paper. Using a qualitative method, nine appropriately selected respondents were questioned with an unstructured interview guide. The transition to a society characterized by interaction has caused a greater part for bilateral communication between consumer and consumer but also between consumer and company. The increased usage and integration on Internet has resulted in so called social media channels. User generated material is published on these media channels which leads to discussions about companies, products and services.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.