Photovoltaic Systems in Sweden has longbeen heavily dependent on subsidies and grants to bring in a profit for the investor. Production of excess electricity is a major reason for this as the compensation for excess electricity today is low. However, there are businesses that have an electricityneed that are particularly suitable for solar electricity. These businesses have an electricity demand when the sun shines the brightest and if the Photovoltaic System is properly scaled, the excess electricity can be minimized. A golf club is that kind of a business and this thesis aims to examinate the solar power potential for golf businesses in Sweden.Nine golf clubs was selected from different locations in Sweden.

Overall aim of this master?s thesis is to describe and identify perceived barriers in Swedish businesses within solar energy field and analyze, based on four theoretical viewpoints, how these barriers can be handled. In other words how can the barriers be overcome or eliminated to better succeed in the commercialization process? The method applied is qualitative in which data has been collected through phone interviews originated from seven Cleantech businesses which operate within solar energy. Furthermore this thesis has a descriptive- and an explorative purpose.

Uppsala County has ambitious environmental aims for the planned residential area inÖstra Sala backe. In this thesis different energy sources have been evaluated todetermine which system that would be most favorable given currently availableinformation about the project. Planned energy usage has been divided into tap waterheating, space heating and power. Three base case scenarios were made with districtheating, small scale bio fuel and heat pump. Solar power and solar heating were thensimulated and the production from the two could individually be deducted from theenergy need in the base cases, constituting 9 different scenarios.

In an attempt to develop a more cost-efficient material for solar   energy applications, nano-particles of nickel oxide composite in a silikatmatris manufactured with solar gelmethod and studied structurally by electron microscopy. Furthermore, the thin film optical properties characterized by Variable. Angel Spectroscopic Ellipsometry. Sol gelfilms suitability as a selective absorber surface is also analyzed by optical modeling..

The purpose of the project is to determine the impact of solar cells and electrical vehicles on the future electricity grid and distribution network. Future electricity grids will be affected differently than it does today. Therefore, it is important to determine the impacts so that the current electricity distribution system can be developed and redesign to achieve the future demand. In Sweden, government has changed rules and laws in order to make it easier for private sector to invest in renewable energy sources. Our project focused on the impact of the solar cells and electric vehicles on the low voltage electricity distribution.

There have been several projects with solar installations in Sweden, and Sala-Heby Energi (SHE) wanted to create a solar plant. The question answered in this thesis is whether it is economically viable to create such a source of sustainable, renewable energy. The plant would be built with the help of the financial effort from 120 customers. This economic union would sell the electricity to the SHE, for SEK 4.50 per kWh up to a certain level over a period of 10 years. It would be a long term commitment to environmentally friendly electricity, using solar cells which convert sunlight directly into electricity.In year 2009 there was introduced a new state aid for photovoltaic systems, to create an increased and continuing interest in solar cells.

Uppsatsens syfte var att undersöka vilken betydelse yttre påverkan och inre drivkrafter har haft i fyra individers karriärutvecklingsprocess inom en hårt konkurrensutsatt bransch, samt hur dessa har hanterat denna. Datainsamlingen genomfördes med hjälp av semistrukturerade mailenkäter, och det insamlade materialet bearbetades med hjälp av deduktiv tematisk analys. De teman som ligger till grund för analysen är: studie- och yrkesvägledning, cooling down, empowerment, informationsteorier, forskningslitteratur samt karriärvalsteorin SCCT. Studien visar att samtliga respondenter har utsatts för dämpande påverkan, cooling down, under sin uppväxt, både från skolpersonal, och den egna familjen, men också att de erhållit empowerment från andra håll. Respondenterna har hanterat denna yttre negativa påverkan på olika sätt, men gemensamt för dem alla är att de visat på en inre drivkraft, som trots den nämnda negativa påverkan gjort att de nått framgång inom sitt gebit.

Akademiska hus is a real estate company that specializes in providing Swedish universities with housing facilities for educational and research purposes. The company strives to reduce its use of energy by 40% between the years 2000 and 2025. The aim of this thesis is to determine which measures can be taken to reduce the need of purchased energy in a building that is used by theSwedishUniversityof Agricultural Sciences inUppsala.In order to determine the results of various changes to the building envelope and ventilation system, the building was modelled in the computer simulation program VIP-Energy. Other proposed changes to make the use of energy more efficient concerned water use and lighting. The need of purchased energy can also be reduced by producing electricity or heat on site, using solar energy.Results show that economically viable measures include upgrading windows and faucets, adjusting control systems for ventilation and lighting, and installing roof mounted solar panels for power production.

In this report a study has been done regarding different heating systems on which are the mostcomprehensive with solar heating systems. The report has also been focusing if solar power can beused as a primary heating source for supplying more than 50 % of the buildings total heatingproduction. The University of Dalarna constructed a demo-house for this purpose and according tocalculations the total solar usage is more than 50 %. This house has been made for referenceregarding the design of the heating system of property 5:37.Further studies have been made to compare different heating systems that are compatible with asolar system, where the compared systems purpose is to be independent of direct using electricity. Asystem of this design is regarded as sustainable according to environmental as economic issues.

Problems with the current energy system, which partially relies on non-renewable fuels, are increasingly recognized. Emissions of greenhouse gases from fossil fuels may speed up global warming, which in turn leads to a number of negative consequences. Nuclear energy is risky and relies on consumption of a scarce resource. This leads to a demand of renewable energy that is also economically feasible. One possible renewable source of energy is solar energy.

Every year, KTH participates in the Shell Eco Marathon, a competition whose goal is to design a vehicle that can go as far as possible using only the equivalent energy of one liter of petrol fuel. This year, one of KTH?s contributions to this race is the Agilis prototype; a car powered by a uniquely configured HCCI-engine developed at the university. The engine is dependent of several subsystems in order to work properly, among other, systems for cooling and lubrication.Combustion engines are in need of a cooling system that reduces the heat developed during the combustion. In general, two main types of cooling systems are employed; either air cooling, where the outside of the cylinder is exposed to a flow of the surrounding air, ore water cooling, where water flows in tubes around the engine, and the heat are transferred by the water to the surrounding air through a heat exchanger.The purpose of the lubrication system is to prevent the friction that builds up in the interference between moving parts in the engine.

The number of data centers and their capacity is increasing throughout the world. Theenergy used in these data centers and the emissions from the use are increasing at thesame rate. The total use of energy will double from 2008 to 2011 based on the trends indata centers use. Research in this area says that the emissions from data centers willhave surpassed the level of airline traffic in 2020. The index used today to compare howefficient a data center is, called PUE, is lacking some information.

Namibia, southern Africa, suffers from an energy shortage and is therefore facing severalchallenging problems. The use of firewood as fuel for cooking is common in the whole countryand has negative consequences for health and the environment. This work have focused ondeveloping a solar baking oven, calledSunbaker, adapted for Namibian families needs forbaking. The development was based on classic solar cooking limitations, specific needs forNamibia and to have a feasible manufacturability.The project started with a theoretical study in Sweden where different solar cookers, informationregarding Namibia, technical aspects and end user aspects were studied. To assess the need for asolar baking oven aMinor Field Study took place in Namibia during eight weeks in July toSeptember 2009 and resulted in a product design specification.

A Swedish electronics company wants to make the cooling of one of their electronic components more efficient. They propose that a retrofit liquid cooler is the way to achieve this goal. The current air cooling has high energy cost due to the high amount of power needed to power fans and heat exchangers. Using high volumes of air for cooling also leads to noise pollution. The conversion from air to liquid cooling would possibly make the operation of the electronics more cost efficient and less noisy.The purpose of this project is to theoretically evaluate different concepts of drawing the heat generated by the electronic component in to a fluid, using numerical calculations in Matlab and FEM simulations in ANSYS.

In this report the two authors, and project contributors alike, describe their work withdeveloping a solar cooker intended for usage in the developing countries of the world.Specifically, the work aims at developing a new, solar heat driven cooking device, possiblybased upon the current product. This should, in comparison to the current product, be lighter,easier to transport and to produce. Also, the new product?s production mustn?t be more costlythan today and the included materials and components must be obtainable from within theBolivian national borders where the product is currently produced. During the project, certainadvantages with a more efficient, and, above all, a more moderately priced product, werediscovered.