The Societety Park (Societetsparken) of Varberg here in Sweden, established in the year 1883 (1856), is one of the most famous parks in Varberg. Today it is, more or less, only used as a park that you will walk through in the wintertime, under the summer season though, the park starts blooming and then it is used for public music and singalong evenings. Earlier it was an old health resort park with its fine old traditions.The Societetsparken was a private owned park until 1902 when the town purchased it. On this plot there was already a smaller park and it was established as early as in 1856. It was called Badhusparken (The Public Bath Park) and it belonged to the hot- and cold-bathhouses, and these baths were very well frequented.

In June 2006 the Swedish government decided that the use of energy in buildings should be reduced by 20 percent until 2020, compared to the level of energy used in 1995. To contribute to this goal, the real estate company ?Eskilstuna Kommunfastigheter AB?, set up own goals for their buildings. In 2009, the goal for schools was to have a maximum energy use of 118 kWh/m2year for heating and hot water.The school ?Hållsta skola?, just south of Eskilstuna, exceeds the limit since it used 270 kWh in 2008.

Ocean Thermal Energy Conversion, OTEC, is a sustainable energy conversion technology that is not yet commercialized. OTEC is a technology that utilizes the temperature difference in oceans between the warm surface water and the cold water at 1 000 m depth to run a Rankine Cycle. This technology can produce electricity and provide synergies like fresh water, air conditioning and aquaculture. A simulation program for three alternative OTEC systems has been created in order to decide which OTEC system is most profitable; closed, open or hybrid system. In this simulation a production cost analysis is performed in order to investigate and decide which one of the three systems that has the lowest production cost. The production cost analysis also analyzes if the profitability is affected by the size of the facility. After these analyzes, the most profitable of the three different OTEC-systems is expanded by an installation of solar collectors in order to see if the thermal efficiency is improved. The result shows that the most profitable system varies with the size of the facility.

There are several thousands shallow bays along the Swedish east coast. Most of them are disturbed by different human activities, and undisturbed bays can be considered as quite unique. In the sheltered shallow bays water warms up more rapidly than adjacent water favoring the growth of vegetation, which in turns is beneficial to spring spawning fish species like perch and pike. It is nowadays more common that coastal habitats are inventoried to facilitate future preservation and planning. The aim of this study was to investigate the shallow bay Utanåfladen (59° 53`31.38 N 19°00`44.90 E) in the north Stockholm archipelago and evaluate its habitat value.

The building industry consumes approximately 40 % of the total energy consumption in Sweden, where the using stage is dominating with 80 %. There is a lot of work in progress to reduce energy use in the building industry, and the demands from authorities regarding energy use increases. As a part of this work Building and planning department of Sweden has established a requirement that has been applied since 2006, and restricts a maximum energy use for buildings.The requirement includes that an energy simulation must be done in advance to demonstrate that it is possible to meet the demands.Reality is however more complex than an energy simulation program, that frequently underestimates the energy use of buildings. The purpose of this thesisis to study and analyse deviations between estimated and actual energy use in modern apartment buildings. The study includes four apartment buildings in Stockholm, Gothenburg and Jönköping that were built in 2007-2009.

Climate changing is a growing problem for many countries and communities over the world. The cities has a huge work to deal with in their reforcements of their cities to be resilient ones. This thesis makes an effort to investigate and illuminate some of the problem the cities has to solve related to flooding, hazards, erosions, rising sea levels and crotches. This thesis will help to find solutions that international and national efforts has produced and handed out to each other. A lot of communities are charing their excellent tools that works for them.

Syftet med denna uppsats är att skänka en grundläggande illustration av hur relationen bildinom bild och skräck kan se ut. Studien koncentrerar sig på estetiken och reflexiviteten hosbilderna inom bilden hos de japanska skräckfilmerna The Ring, Pulse och Dark Water. Dessabilder består av ett videoband i The Ring, webbkamerabilder i Pulse och övervakningsbilder iDark Water.Användningen av rörliga bilder inom rörliga bilder är reflexivt i den meningen att vimedvetandegörs om filmmediet självt som en konstruktion av bilder. Detta fenomenuppmärksammar oss också på akten att se. Syftet i skräckfilm är att skapa känslor av olust ochskräck hos oss och detta åstadkoms, bland annat, genom hur bilderna ser ut och är upplagda.Ett återkommande element hos bilderna inom bilden hos våra filmer är otydligheten hosflera av dem och detta att vi inte kan se bilden tydligt kan ge upphov till olustkänslor.

Using leaching test is a way to get a picture of pollutants retention and leaching in a risk assessment on contaminated land. There are several different types of standardised leaching tests today, where the natural leaching processes are speeded up to make it possible to predict the leaching of pollutants. These leaching tests have been developed for waste and there are no specific guidelines on how to judge the results from the tests, when making a risk assessment on contaminated land. This work is an investigation on how to use leaching test in this type of risk assessments. The strengths and weaknesses of the different types of tests are discussed. Depending on what type of information you want from your leaching test, different types of tests are suitable.

ABSTRACTThe fauna of the Lower Cambrian is far from fully understood, as is the environment of that epoch. Some of the most crucial moments in the history of evolution takes place during this epoch; the Cambrian explosion and the appearance of ecosystems as we know them. That makes it an important period to investigate. Doing so, the Lower Cambrian offers a lot of problems, one of which is that body fossils are seldom preserved. That has often left us with trace fossils to create an image of the Lower Cambrian life, but also some bedrock features such as ripple marks.The main purpose of this work has been to investigate the possibilities of relating the wave lengths and forms of recent wave-generated ripples to fossil ones, and also to evaluate the methods for that kind of comparison.

Highly polluted urban storm water from e.g. highways can contain large amounts of heavy metals that may cause harm if they are discharged into recipients. To remove the heavy metals a possible low-cost method that does not require much maintenance, could be the use of reactive filters with filter materials consisting of industrial residues or other cheap mineral based materials. Dissolved metal ions are removed by reactive filters through the processes of ions binding to active sites on the surface of the filter materials, or by formation of insoluble precipitates.The ability of CaO-treated granulated blast-furnace slag, iron oxide coated sand, olivine and nepheline to remove seven heavy metals (Cr, Cd, Cu, Ni, Zn, Pb and Hg) from urban storm water was studied. Initially batch experiments were performed where the effect of pH, dissolved organic carbon (DOC) and dissolved ions on the adsorption efficiency was studied.

The content of the following report is the summarized result of three students thesis at Blekinge Institute of Technology in co-operation with Water Jet Sweden AB. This report will give the reader a description of principles how to measure the abrasive mass flow in a waterjet cutting system. The work began with a visit to Water Jet Sweden AB to get a closer look at the problem. When the analysis of the problem was done the criteria were defined in the form of demands and desires. The main task of the criteria was to guide the search for the solution.

Moisture damage in kitchens is an area that many people believe to be irrelevant andnot a subject to concern, however the problems encountered might be larger thananticipated.The purpose of this essay is to get a view of how problematic moisture damagecurrently is as well as what can be done to prevent damage during the constructionand building of new housing.Statistics regarding moisture damage as well as several tools for damage preventionhave been studied and investigated. Industrial regulations have been reviewed tounderstand the requirements construction companies must legally follow during theconstruction and building of new kitchens. Home manufacturers and largerentrepreneurs have been contacted in order to get their point of view regarding theproblems with moisture damages in kitchens.The knowledge of moisture safe constructions is prevalent by home manufacturers,insurance companies and entrepreneurs. Despite this knowledge, the constructioncompanies predominately follow the industries regulations, which normally onlyimplement the minimum requirements.In order to get construction companies to design and build kitchens with increasedmoisture security, stricter industrial regulations might be needed to be implemented.Unlike bathrooms and laundry rooms, kitchens are not defined as a ?wet room? andthe regulations for the construction of kitchens are more lenient.It is difficult to detect water leaks in an early state and the moisture damage is usuallyextensive before it is discovered and repaired if the kitchen lacks moisture securedconstruction and water security.

The global climate-change means increasing mean-temperature and higher precipitation in Sweden, which leads to shorter periods of frozen ground in the forest. At the same time the harvesting machines are getting bigger and more powerful. The forest industry aim at an even wood flow, and the ground damage has to be as low as possible. The two biggest causes for ground-damage is the bearing capacity of the forest ground and the ground-pressure of the harvesting machines. The aim of this study was to find out some rules for the machine choice considering ground pressure, when harvesting on ground with low bearing capacity.A field study, using a Valmet 890.3 forwarder, was carried out where different ground pressures and their effect on the ground were tested on two different types of ground.Additionally, an inventory of damaged harvesting grounds was made.

AbstractElectricity consumption is a globally increasing problem caused by the high share of electricity produced in coal power plants. These contribute to high carbon emissions when only about 1/3 of the heat generate electricity and the remaining 2/3 of the heat cools off. Combined heat and power plants (CHP) have high efficiency because they use the residual heat for domestic heating. The CHP plant often use fuels from renewable resources, giving them a lower carbon footprint, but are also depending on the heat demand. If electric powered products such as drying cabinets convert to heat powered products more environmentally friendly electricity will be produced by CHP plants, which can supplant electricity, produced from coal power plants and reduce carbon emissions.

This thesis within the field of Integrated Product development at the Royal Insitute ofTechnology, performed at Primary Development Dishcare at AB Electrolux, is supposed to finda solution to enhance the hygiene inside an Electrolux dishwasher. The outcomes of this thesisare functional prototypes to evaluate the efficiency of disinfection by the use of Ultra VioletLight and Ozone.The thesis has followed Electrolux Primary Development process, with delivarables andcheckpoints.Ultra violett light with a wavelength of around 264 nm penetrates through the cell wall ofbacteria and micro organisms and causes a molecular rearrangement of the cells DNA. Thisprevent the bacteria from reproducing and it is considered dead. Commonly used UV-C lampstransmits the wavelength 254 nm which is very close to the optimum for germicidal action.A competitive brand have reacently launched a dishwasher claiming to achieve greaterdisinfection with an UV feature. This dishwasher was tested during the thesis and proven tohave a very low effect on the hygienic result.Two prototypes were devolped and tested for UV disinfection of dishware.