In some coastal areas in Sweden water shortage sometimes appears because the withdrawal of groundwater is greater than the groundwater recharge. It creates a situation where the available groundwater is insufficient to support residents and businesses with drinking water. The high withdrawal of groundwater also creates a risk for saltwater intrusion to drinking water wells. The problem most commonly occurs during the summer when the groundwater recharge is low, but the population is high, due to tourism and summer residents.The purpose of this study was to investigate how local water supply in areas affected by water shortage can be solved as sustainable as possible. The work was divided into three parts where the first part comprised of a literature review on water systems in which four different options were investigated: artificial groundwater recharge, rainwater harvesting, desalination and water reuse.

The European Union is struggling to maintain democracy and tries to increase the participation among the citizens in Europe. The European Citizens? Initiative, ECI, is a platform established by the European Commission to allow citizens to propose new legislation. ?Water and sanitation are a human right! Water is a public good, not a commodity!? is the first ECI that has met the requirements.

This degree project studied surface waters on Kåbo Golf Course in Uppsala, Sweden, with the aim of determining the status of the water and how it is affected by the activities of the golf club, and to obtain suggestions of measures to create better conditions for the water environment on and around the golf course. The project forms part of the environmental protection work of Kåbo Golf Club, which is working towards achieving environmental certification from the Swedish Golf Association (SGF). The study is based on literature studies and quantitative and qualitative field studies of water on the golf course, with the focus on environmental factors identified as being important for the golf industry and on strategic environmental goals developed by SGF. The number of open water bodies in the Swedish landscape has substantially declined during the past 200 years, so it is important to save those that remain. This study showed that the surface water at Kåbo Golf Course is an important element in the surroundings since the area contains few wetlands, which can be a habitat for large numbers of species. The stream and ponds on Kåbo Golf Course also have the important function of serving as water hazards in the game and adding difficulty and variety to the course. Since Kåbo Golf Club wants its surface waters to look aesthetically appealing, extensive algal growth and drying up of ponds during parts of the year are regarded as problems.

Acidification is a central concept in the environmental debate. The effect of acidification of the soil is a matter of a decreasing amount of cations and thereby a decreasing ability to resist a supply of hydrogen ions to the soil. Acidification has gradually increased in the O horizon in Västerbotten over a 30-year period from the 1970th to the 1990th. The aim of this study was from inventories of The Swedish National Forest Soil Survey and The Swedish National Forest Inventory explain and quantify the acidification that has occurred in the O horizon of two regions in the north of Sweden. Data from SMHI, The Swedish Meteorological and Hydrological Institute, has also been used.

The thesis has been made for NCC Teknik in Gothenburg. The NCC Corporation is one of the largest leading companies in Scandinavia within the construction industry. NCC is active throughout the whole construction process, where one part is to carry out soil investigations prior the construction of various buildings, for example residential buildings. NCC Technology wants to visualize the samples taken at the construction sites in 3D for clients, authorities and also internally to show in a simple and understandable way how contamination is spread out in the soil.The thesis includes the area of Limhamns läge in Malmö, previously an industrial area. The area has previously included a concrete factory and the contamination from that factory has lingered in the soil.

This study is focused on small scale water and wastewater handling in Sweden. The study is divided into two major parts; the first describes common methods for water- and wastewater handling and the second part is a case study on three small and expensive systems in Gällivare municipality, in the north of Sweden. In the case study, abilitys for the local government to hand over unwanted systems to the water users is investigated and found to be a plausible solution to cut costs for two out of the three studied systems. In the third case, water and wastewater systems is not recommended to be handed over but other ways of cutting costs are suggested..

Slopes in fine till soils are exposed to surface erosion due to rainfall, snowmelt and upland water sources. Large areas of road slopes are therefore covered for surface erosion protection. Preventive methods like ditches and trenches are also being used. Silt tills are particularly troublesome since the water can bring the soil into suspension and cause mudslides. Different methods for erosion protection have been studied in this work, with the emphasis placed on rockfill covering. The need for and the dimensioning of this type of covering has been examined in literature and field studies.

The Falun area has been undergoing mining activity for a very long time and miningslag piled up and was used as foundations for building houses and roads, Ingarvetstarted expanding in the 1970s to an industrial area. The main goal for this report is toreconstruct a soil map of how the landscape was before anthropogenic effects. With thehelp of ArcGIS and geotechnical reports a soil map for parts of Ingarvet, Falun werecreated..

The aim of this study was to evaluate the stir drying method, for drying of grain during Swedish conditions. The evaluation was done during the harvest year 2004, on four farms with stir driers. The driers were evaluated for their energy consumption, design, stirring effectiveness and how much time the farmer has to spend on every tonne of grain. A comparison was also done with conventional Swedish high temperature driers. Totaly six batches of grain from stir driers were examined, mostly winter wheat, but also barley and wheat.

Periods of hypoxia are a recurring issue in Brunnsviken. Main factors that trigger hypoxia in Brunnsviken are eutrophication  due to anthropogenic emission of nutrients, stratification in the water column due to salinity and temperature differences  that prevents mixing and a sill inlet that prevents water exchange. As an attempt to improve the oxygen levels, bottom water is pumped from Brunnsviken causing aerated surface water to flow back into the basin.  The objective of this Master?s thesis was to study the change in dissolved oxygen levels due to pumping.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

AbstractDrinking water is an important resource on Earth both for humans and animals. Although most of the surface is covered by water only a small quantity is available as drinking water. Our manner of living creates a lot of pollution which has an environmental impact. Groundwater has a protracted turnover time in the soil and it can take many years before the effects of human impact are detected. The Swedish environmental object is ?Good groundwater quality? which aims to provide a safe and sustainable supply of drinking water today and in the future.

Heat is distributed to the district heating customers through pipes with water as a heat carrier. The district heating system is complex. To decide what is leakages from the district heating net versus what is the water consumption of the plant, is difficult. Therefore, the purpose of this master thesis is to establish a model where the district heating net?s leakages but also the water consumption of the plant can be followed daily. The project is performed at Vattenfall´s district heating power plant in Uppsala. Information is gathered through discussions, drawings of the plant and guided tours of the plant.

Erasteel Kloster AB Söderfors have been commissioned by the county administrative board in Uppsala län to make an inventory of possible contaminations in theirs industrial- and landfill areas on the basis of the Swedish Environmental Protection Agency?s; ?Method of Surveying Contaminated Sites-phase 1? (MIFO-fas 1). The inventory starts with maps and archive studies, place visits and interviews, and finally a risk classification is done. A risk classification is a compilation of four categories; pollutant toxicity, contamination level, possible spreading condition of the pollutant, sensitivity and protection value of the environment. In this paper five partial areas (Holmen- and Jörsöområdet, Järnsvampsområdet, Ingsådeponin, Östra verken and Myrområdet) have been described from a historical point of view. Only parts of four areas have been risk classified (Holmen- and Jörsöområdet, Järnsvampsområdet, Ingsådeponin and Östra verken), due to that the other areas isn?t own by Erasteel Kloster AB. Holmen- and Jörsöområdet Holmen- and Jörsöområdet have during the entire activity time been carried out as the production core in the company.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.