The purpose of this essay is to find out if liming with Ca(OH2) and CaO can reduce leachingof phosphorus from agricultural land and the problem with eutrophication. This purpose alsoincludes getting knowledge about how to make the phosphorus retained in the soil and beaccessible for the plants. This essay is supposed to show if more research is needed in thissubject. There has not been much research about this subject and therefore the amount ofmaterial to study is limited in this literature review. The research reports that have beenstudied have similar results.

This examination work on studies and research in articles is mostly from other countries. The purpose of the examination work have been to find out if there are any means you can work with to find out when its time to start irrigation, how they works and if they are credible. In Sweden there is not many means for decide when it?s time to irrigate and how much water you should appear. Swedish farmers think they have so much experience that they don?t need techniques like this.

Agriculture has to be performed in a sustainable way in order to sustain high yields and to support a globally growing population. Functional soil properties are fundamental for high yields and in order to achieve good soil conditions sustainable management is a key. Loss of soil organic material and increased soil acidity are problems associated with degradation of soils and hence less sustainable agriculture. In this thesis, the effect of different agricultural systems on soil organic matter, pH and yield was examined. The systems examined are a cereal system with straw removal or returning and a ley system, all with different nitrogen levels.

During the year of 2008, a powerful earthquake hit the southern part of Iceland, which changed the geothermal conditions in the area around the city of Hveragerdi. Elevated soil temperatures in a nearby forest plantation have contributed to a unique opportunity for researchers to study how an increased soil temperature affects the boreal forest ecosystem, something that partly can be connected to the climate changes which are happening today. The boreal forest is representing a carbon sink and a buffert for the emissions that occurs. Changes in this ecosystem will for that reason contribute to major impact for the global carbon cycle. To study the impact of how elevated soil temperatures affects different processes in a plantation of Sitka spruce, studies were made on the photosynthesis of the trees and the respiration from the soil.

A today common soil reinforcement method is the installation of lime-cement columns. Lime-cement columns have been used since the 1970?s and have been a useful method for stabilizing soil at great depths. It is mostly used for stabilizing road and railway embankments because the method is economically viable and the columns are easy to install. The total costs for the installation of the lime-cement columns is dependent on the numbers of installed columns, what percentage of lime and cement that has been used and the pattern in which the columns has been installed.

Using leaching test is a way to get a picture of pollutants retention and leaching in a risk assessment on contaminated land. There are several different types of standardised leaching tests today, where the natural leaching processes are speeded up to make it possible to predict the leaching of pollutants. These leaching tests have been developed for waste and there are no specific guidelines on how to judge the results from the tests, when making a risk assessment on contaminated land. This work is an investigation on how to use leaching test in this type of risk assessments. The strengths and weaknesses of the different types of tests are discussed. Depending on what type of information you want from your leaching test, different types of tests are suitable.

In southern Sweden, beech (Fagus silvatica) and spruce (Picea abies) are two species with similar demands on soil properties. With increased global warming and high acid deposition the future may bring larger areas were the two species are overlapping, competing for the same soil. The aim of this study was to compare spruce and beech concerning distribution, cultivation and soil properties. From available data comparisons were made between spruce and beech forests in Sweden. Soil analyses were made on samples from beech forest in southern Sweden, with and without natural regeneration of spruce.

In this final thesis, an existing method for analysis of chlorophenols (CP) in bottom sediments has been updated and adjusted for analysis of chlorophenols in soil. The covalent bonds between the chlorophenols and the soil matrix were broken through basic hydrolysis and the chlorophenols were then separated from the water phase through addition of sulphuric acid followed by ether extraction. The chromatography was improved through extractive acetylation of the chlorophenols.The updated method was then applied on soil samples from a contaminated area (a former sawmill in Hyttsjö, Östergötland, Sweden).The analyse was preformed by GC/MS with respect to 2-MonoCP, 4-MonoCP, 2,4-DiCP, 2,6-DiCP, 2,4,6-TriCP, 2,3,4,6-TetraCP and pentachlorophenol (PCP).Contamination of chlorophenols in nature can be explained by the former use of wood preservative chemicals based on chlorophenols. In the 1960s and the 1970s these chemicals were used in Sweden, but due to their toxicity they were banned by the Swedish government in 1978.In Hyttsjö a pentachlorophenol-based product named Santobrite was used for several years. The concentration of PCP in the soil samples from Hyttsjö varied from 0.2->1.8 ng/mg dry substance.

This Master Thesis is a product development project that has been carried out in cooperation with Scania CV AB. The purpose has been to find the relationship between geometric parameters and the swirl number for an XPI- cylinder head in order to improve the design specification.The increased focus on environmental issues from society leads to tighter emission legislations for the truck manufactures. In order to drive the development forward considerable resources are spent on research and development on diesel engines and its combustion process. The inlet air has a significant impact on the formation of emissions and the flow that is desired is called swirl. Swirl is achieved by making the air rotate around the vertical axis of the cylinder.Earlier cylinder heads that has been developed at Scania CV AB have shown clear relationships between geometric parameters of the cylinder head and the swirl number.

Toxic metals contaminate soil worldwide and thus serve as sever environmental threat. Therefore the purposes of this study were to investigate in which soil fractions that different heavy metals (Fe, As, Cu, Zn and Pb) could be found in contaminated soils and if it is possible to use sieving as a method for decontamination. Soil samples were collected from three different locations, the Nasa silver mine, the Blaiken-mine and Svalget environmental station. The samples were oven dried and later on sieved into six different fractions 8mm, 4 mm, 0.5 mm, 0.250mm, 0.063 mm and <0.063 mm. The fractions 4 mm, 0.5 mm and <0.063 mm from each location were analyzed in an x-ray fluorescence detector.

After emergencies involving chemical spills it is of great importance that correct measures are taken with short notice, both for the security of people and in order to minimize future environmental consequences. The RIB-unit at the Swedish Rescue Services Agency initiated this study, the aim of which is to propose changes to the existing chemical transport calculation tool: Chemical Spill 3.4, included in RIB - Integrated Decision Support for Civil Protection, so that it can be used for decision support as well as in preventive work. A rough estimation of chemical transport in the subsurface is considered being of great importance when making decisions during emergency response operations.The proposition presented in this report is a non site specific chemical transport model which is designed to give a rough estimation of NAPL flow in homogenous isotropic soil shortly after an instantaneous release. The model can be used at two levels; both in situations without access to information on subsurface properties, and with more accuracy in situations with knowledge of the included parameters. For that reason the user can choose among predefined alternatives or assign the parameters a numeric value to increase the quality of the model output.

AbstractThe research project Liberation, supported by the European Commission under the Environment and Sustainable Development Programme (Fifth RTD Framework Programme) aimed at developing a decision support system for ecological risk assessment of contaminated sites has proposed a tiered system including the triad method. This method integrates contaminant chemistry and bioavailability analyses with observed ecotoxicological effects in soil and groundwater. In this study the triad method was used to perform a risk characterization of a former surface treatment and metal industry, now used for the student union buildings of the Mälardalen University in Eskilstuna, Sweden. On the site, high concentrations of copper, zinc and nickel have been detected in the soil in a preliminary investigation of contaminant levels with XRF. For performing the risk assessment of the site according to the triad method, contaminant bioavailability, soil metal concentrations and soil toxicity were determined and an ecological assessment was carried out on four selected soil samples (one reference soil and three samples with low (B), medium (C) and high (D) contaminant levels). Contaminant bioavailability was measured through leaching (ISO TC 190/S7) and biouptake tests (DGT).

The margin in crop production is more and more less and it forces the producer to check out how to reduce the cost of establishment of new crop. One way to reduce the cost in establishment is to begin with plough less farming. It saves money and time compares to conventional soil preparation with plough and harrow. Not all soil types are god for plough less farming and should be continued with ploughing (mainly light soil), but other soil types working very well with plough free farming. If you want to success with plough less farming you have to think in new lanes. One of the things you have to think about is to not grow too much cereal after cereal. Low stubble is important when you harvest the crop and also to spread and chop the straw well. I have in this work interviewed some farmers and farm advisers in Östergötland to see which thoughts they have about plough less farming.

The International Organization for Standardization (ISO) proposes vibration standards for the evaluation for machine damage due to vibration in rotational machines, where some vibration parameters are given to measure the vibrationgrade. This work evaluates the relevance of the vibration standards in hydro plants that are proposed by the ISO, and also investigates if there are methods used in other countries could have greater importance. Through statistical analysis of collected data we got a better understanding of relation among different vibration parameters, and also the importance of correct choice of the parameters for the evaluation of vibration. We have found that the vibration standards available today in hydro plants are not reliable for the judgment of vibration?s grade.

The decomposition of organic carbon in drained peat soils is a major source of carbon di-oxide in Sweden. A big part of these drained peat soils are used in agriculture and it is a big challenge to slow down their decomposition. It has earlier been thought that less tilling and higher water table levels would decrease the activity of soil microbes and thereby the decomposition, but recent experiments has showed that this has little or no effect. In this bachelor thesis a field experiment was made on drained peat soil with ley, outside Björklinge, Uppsala municipality, Sweden. The experiment was carried out in May 2011. The objective was to develop a method to examine how the net exchange of carbon diox-ide from plant covered peat soil is affected by temperature and photosynthetically active radiation (PAR).