The Multispectral Canopy Reflectance Model (MCRM) by Kuusk (1995) has beenused to simulate the reflectance of a sugarbeet canopy. The simulated reflectancevalues show high absorptance in the VIS area, compared to field measurements, andhigh reflectance values in the NIR area. The errors may be due to overestimation ofclorophyll content in the sugarbeet leaves and scattered light during fieldmeasurements. The estimation of the clorophyll content where carried out using thePROSPECT-model by Jacquemoud & Baret (1990).During the vegetation period, the state of the canopy moves towards a closed canopy,with sparse vegetation in spring. The MCRM-model was used to perform a ?spring?simulation, which was compared to the original simulation.

Stabilization of subgrade is an internationally common technique to improve the characteristics of a soft soil. Improving the stiffness and bearing capacity of the subgrade enables the pavement to be designed with reduced depths of subbase and basecourse aggregates. This makes the stabilization technique both economically and environmentally interesting. Both natural and stabilized soils have high inherent property variability that should be considered when the characteristic value is derived. By analyzing the spatial variability in stabilized and natural subgrades it is possible get the parameters needed for reliability?based modeling of soil properties.

The need for snow-free surfaces at squares, bus stops, platforms, car parks and sports facilities increases and at the same time energy price rise and the environment is becoming a hotter issue. The construction of the ground heating systems often lack thermal insulation under the heating pipes, which means that the heat from the pipes not only warm up the soil surface but also heats the surrounding soil. The insulation also has more features, by insulating the risk of frost damage is minimized. The goal of this report is to demonstrate the large heat loss and energy costs in the absence of insulation under the heating system.The report begins with a scientific way to study and treating the soil heating system uses, and the theory involved. Furthermore it also deals with different routing principles of heat pipes depending on the facility.All calculations are made with so called finite element method (FEM), in COMSOL Multiphysics 3,5a, where models are created with different conditions.

The last decades have shown increased nitrogen leeching from soil to water recipients. This is inSweden mainly due to over-manuring of agriculture land, effectivization of drainage systems and thedeclining extent of wetlands. The accumulated amount of nitrogen in water doesn?t only make itunsuitable for use by humans and cattle, but also decreases the biological diversity as well as negativelyaffect tourism and fish industry. In the most severe cases shallow maritime grounds can be completelydepleted of oxygen due to decomposition of the increased amount algae and plankton growth.This study have the aim to describe and quantify the nitrogen leeching from the Genevad drainagebasin, located in southern Halland, Sweden.

The aim of this work was to study if the edge of the forest is more resistant to heavy winds than the trees located further in from the edge, and how this edge effect changes between different types of tree species and site types. The data was collected from an electric power line going from the north to the south of Sweden. The mean value of the clearcutted area around the power line was 120 meters. The main direction of the storm in January 2005 was west-southwest and thus the power line was a perfect place for gathering a large data set. The main parameter studied was the damage frequency at the edge of the forest compared to the trees located further in from the edge (up to 100 m from the power line). Tree species mixture, soil moisture class, soil type, topography, stand height, stand height of the stand on the other side of the power line and wind exposition was estimated. The results showed a distinct edge effect. The edge of the forest had clearly lower damage frequency for all tree species. A marked difference was observed between tree species and damage frequency.

The purpose of this thesis is to collect knowledge of techniques and materials for planning roofgardens. Gardens built on top of buildings is not a new phenomenon, already in the beginning of the century architects were experimenting with roofgardens. During the Modern Era roofgardens appeared as a part of the design and worked well together with flat roofs and the ideas of light, air and greenery. Today the most common kind of roofgarden is on a ground-level joist that hides parking or other underground functions. The most important difference between planning a roofgarden and a garden on the ground is the limitation of the load of the roofgarden. Plants, paving-material and equipment must be chosen with this in mind. A light and thin layer of soil demands plants with small needs for water and nutrition.

Through previous studies during my education, I have experienced that chemical deicing road salt is a known problem, mainly in southern Sweden. Road salt causes damage to the environment and also damage to vehicles and structures such as bridges, etc. Road salt causes vehicles and steel constructions to rust, leading to increased costs for repairs of damage to structures. Road salt also causes damage to the plants and the economy to suffer, when plant material and soil needs to be replaced. In order to get closer to a solution, I put up three questions.

Green manuring is a way of creating an organic fertilizer by growing a crop that is mowed down. Besides the fertilizing effect this method has been shown to have a positive influ-ence on soil organic matter as well as weed flora, and green manure is an important me-thod of weed control in organic farming in parts of Sweden. However, the release of nu-trients from the green manure varies and can therefore be difficult to control. Risks for losses of nutrients are also present. Although the area of organic farmland is increasing in Sweden, the use of green manure is decreasing.This report contains a literature study which compiles research on the functions of green manure in a cropping system and also how the crop can be used if harvested, for example to produce biogas.

The aims of the silvicultural method natural regeneration of spruce (Picea abies L. Karst) in birch (Betula pendula and pubescens) shelterwoods are to establish a new stand of tree seedl-ings and to protect those from high groundwater levels, frost damages and grass competition during its first life years. The aim of this work has been to (i) describe how shelterwood and stand characteristics influ-ence the results from using natural regeneration of spruce protected by a shelterwood of birch, and to (ii) compare those regeneration results with planting of spruce after soil scarification in clear-cut areas. Totally 17 harvesting sites have been inventoried and 15 of those included natural regenera-tion in birch shelterwoods, and two were subjects to soil scarification and planting of spruce. The sites represented 7-10 year old final cuts and are located in the coastal (eastern) region of the province of Norrbotten in Sweden. In all areas shelterwood and stand characteristics, as well as the number of main crop seedlings and the height of the highest main crop spruce seedling, were estimated and registered in all areas.

This report deals with handling and interim storage of soils which are planned tobe reused in construction works. The types of soils that are dealt with are gravel, topsoil and sand. The thesis work has been carried out in collaboration with Skanska Sverige Väg och Anläggning Sydost. The main goal is to find an area for using to store soil in between projects.Studies of laws and regulations regarding exploitation and storage of soil has led to a theoretical background upon which the report is based. Background informationhas also been gathered in meetings with the employees at Tekniska Kontoret and Länsstyrelsen in Jönköping.On the basis of literature studies results, a general template has been developed for which desirable properties a possible location should meet.The model was applied to find a number of possible options in the vicinity of Jönköping.

In two feeding experiments Bacillus induced priming of plant defense was tested for its effect against the generalist insect pest Spodoptera littoralis. The main hypothesis for the study was that Bacillus induced priming would enable the plant Arabidopsis thaliana to defend itself better against this insect herbivore since this priming seems to involve jasmonic acid, known to be important for plant defense to insects. A secondary objective of the study was to examine if any differences in a primed defense capability could be seen between different natural genetic variants (ecotypes) of A. thaliana reflecting habitat differences in pest pressure. The methods used for plant cultivation and Bacillus inoculation were aimed at reflecting conditions that can be expected in an agricultural cropping system. This meant that all plants were cultivated in soil, and the feeding experiments were conducted with the plants growing intact in the soil system.

Green manuring is a way of creating an organic fertilizer by growing a crop that is mowed down. Besides the fertilizing effect this method has been shown to have a positive influ-ence on soil organic matter as well as weed flora, and green manure is an important me-thod of weed control in organic farming in parts of Sweden. However, the release of nu-trients from the green manure varies and can therefore be difficult to control. Risks for losses of nutrients are also present. Although the area of organic farmland is increasing in Sweden, the use of green manure is decreasing.This report contains a literature study which compiles research on the functions of green manure in a cropping system and also how the crop can be used if harvested, for example to produce biogas.

AbstractAt Saltvikens copperindustry, which is located in the municipality of Oskarshamn, copper was refined from sulphiteore some hundred years ago. The ore underwent several steps in the process before the final product was received. These steps all had an influence on the environment through discharge of heavy metals. The area where the copper industry was located is today considered to be of specific national interest due to its valuable nature and cultural values, as well as its value for recreational outdoor activities. Therefore, it is important to determine the present level of contamination and if any transport of contaminants have occurred, and to identify the risks that are associated with the site both at present and in a longer time perspective.Thirtynine soil samples and 16 sediment samples have been analyzed.

Through previous studies during my education, I have experienced that chemical deicing road salt is a known problem, mainly in southern Sweden. Road salt causes damage to the environment and also damage to vehicles and structures such as bridges, etc. Road salt causes vehicles and steel constructions to rust, leading to increased costs for repairs of damage to structures. Road salt also causes damage to the plants and the economy to suffer, when plant material and soil needs to be replaced. In order to get closer to a solution, I put up three questions.

Phosphorus is the single most potent contributor to eutrophication of freshwater and has also been shown to contribute to the toxic algae blooms in the Baltic sea. The dynamics and paths of losses of phosphorus from arable lands are not fully understood. It is known that phosphorus can be lost directly from plant material to water. In studies where plant material has been subjected to several freeze-thaw cycles, large amounts of phosphorus have been lost. Most studies have been conducted under field conditions, with many factors effecting the measured losses of phosphorus, such as weather and type of soil. This study was performed in a controlled environment without the presence of soil. Instead of soil, small glass beads were mixed with the plant materials in vessels, to make possible homogeneous leaching with water through the mixture of glass beads and plant materials. In this study, clover, ryegrass and dry straw were cut to pieces, approximately 2 cm long.