This thesis is written on behalf of Skanska, Väg- och Anläggning Stockholm Mälardalen, vid Nya Karolinska Sjukhuset i Solna, NKS. The report has resulted in recommendations for the method of soil stabilizations of soil nailing, excavation of slope and fiber reinforced shotcrete, which is the most suitable method from a safety and a cost point at the NKS.The aim of this thesis was to investigate whether fiber reinforced shotcrete increases slope stability, with the focus being on the total stability. The main goal was to investigate which method of soil stabilization is the most suitable for the slopes that are analyzed in this report. Through studying literature, the authors have gained an understanding about the theoretical background for the given problem. Through calculations and analyses of the slopes, safety factors have been acquired.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

ABSTRACTThis pilot study examines the knowledge about tree root systems amongst five treeplanting professionals. The aim is to find out the professionals? collective knowledge ofthe nature of root systems of various trees used in green areas. Furthermore; to explorehow the professionals adapt landscaped green areas to the tree root properties in asustainable manner. Questions: Which tree species have special root properties toconsider and how do the professionals utilize this knowledge? And: How do theprofessionals in general adjust planting according to the root systems of trees in areas tocreate sustainable green environments?Interviews with the professionals were performed.

The concentration and storage of organic chlorine and chloride were determined in soil, to a depth of 40 cm, in a coniferous forest in the Stubbetorp catchment area in south-east Sweden. Also, the spatial distribution of the two forms of chlorine was determined. Soil samples were collected at 49 of the nodes in a grid with approximately 105 m between the nodes. The analysis of spatial variability suggested that no spatial autocorrelation was present either within the variable organic chlorine or chloride. This means that no sample was more influenced by another nearby sample, as compared to other samples further away.

Questions concerning the Cultural Heritage must be integrated in social planning.Therefore there is a need for adequate methods for cultural environmental analysis, toreceive knowledge that is relevant in an integrated conservation. The thesis is a review ofmethods for cultural environmental analysis and discusses the qualifications necessary fora method in order to receive adequate information as well as it discusses what kind ofinformation to be considered relevant. The thesis also analyzes a specific method forcultural environmental analysis in order to exam if it has got the qualifications concludedas necessary if it is to be used in an integrated conservation. The conclusion is that amethod for cultural environmental analysis should collect information about the entireenvironment (integrated information about nature and culture, in a historical perspectiveand how it is today), about social structures, physical remains (buildings etc) and what thecollected information tell about the history of the studied area, as well as what is importantin the landscape of today. Information about how the environment should be treated in thefuture is also of importance.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

The purpose of this essay was to develop a conservation program for the outdoor environment at the Zorn House (Zorngården) in Mora, Dalarna, situated in the upper central part of Sweden. In the conservation program the Zorn House garden?s origins and development process has been studied by historical studies of various kinds. As a result a status report also has been made and a description of the garden's values. This has resulted in an objective discussion that provides guidelines for how the garden can be developed in the future.

Allanblackia is a genus of trees that grows in the rainforests of West, Central and Eastern Africa. Its big fruits contain seeds very rich in oil which has been used by local communities for cooking and making soaps. The native stands are threatened by overexploitation and the demand for the oil is much greater than the supply. Domestication programs, aiming at introducing the trees to small holder agroforestry systems, have been started for some of the species. The main aim of this study was to investigate the soil requirements of Allanblackia stuhlmannii in terms of chemical and physical parameters, as revealed by the soil conditions in native stands. Another aim was to see if these varied along an altitudinal transect.

Agricultural soils constitute the base in human food production and soil content of organic matter and plant nutrients together with soil microbial activity are all important parameters for high crop yield of good quality. These parameters are dependant on proper fertilization.Anaerobic digestion of organic wastes for biogas production generates a liquid residue called biogas residue (BR). It contains organic material and plant nutrients which makes ita potential fertilizer for arable cropping. However, it also contains heavy metals and toxic organic compounds and it is therefore in need of evaluation before usage.Microbial tests were performed aiming to evaluate the agronomic traits of four different BR and to find a viable procedure for evaluating slurry fertilizers. Two experiments where soil respiration and soil potential denitrification activity (PDA) was measured at fertilizer addition were performed.

The objective of this thesis was to investigate what influence nature conservation measures taken at regeneration felling. Factors analysed were the forest owners´ situation and their characters, and information activities from wood-suppliers and the Regional Forest Board (RFB). The inventory was performed with a posted questionnaire followed up by telephone to forest owners and a posted questionnaire to wood-buyers. The forest owners were grouped in three strata, depending on the quality results (D- polytax inventory) of the taken forest conservation measures, and for this investigation forest owners were sampled from the population in the tree groups. In total 73 % (41/56) of the sampled forest owners answered the questionnaire Group A (17 answers): Good judgement Group B (19 answers): Bad judgement Group C (5 answers): This group was formed from the forest owners that were informed, by RFB, about nature conservation measures and culture history consideration before the regeneration cutting.

The forest property Fagerdal 2:10 was donated to the Swedish University of Agriculture in 1995 by Erik Rönnberg. The dominating species is Norwegian spruce (Picea Abies) and the average age is high due to selective cutting. The aim of this study has been to analyze how the forest on the property should be managed and demonstrate how a better estimated forest data affects the future management. The impact of the management on the carbon stock of the property was also examined. A forestry plan established in 2009 by Skogssällskapet was used as a basis for the analyses.

Using biofuels from regeneration cuttings is becoming more common in Sweden. Ash from the combustion of biofuels contains many valuable nutrients and base cations. The Swedish Forest Agency recommends that ash should be recycled to clearings where biofuels have been removed, to avoid future impoverishment of Swedish woodlands. In Jämtland, in northern Sweden, a large quantity of biofuels are taken out from cuttings but ash recycling has not yet been tried. The aim of this thesis was to examine the conditions for ash recycling in Jämtland regarding to soil chemistry and heavy metal content in soil and biofuels.