Long transport of products is an environmental issue discussed to an increasing extent. The consumers are increasingly aware of how far our comestibles really have been transported. The increasing levels of environmental emissions are something that concerns people. The question is nevertheless delicate and many choose to ignore it. This is no longer an option.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Allanblackia is a genus of trees that grows in the rainforests of West, Central and Eastern Africa. Its big fruits contain seeds very rich in oil which has been used by local communities for cooking and making soaps. The native stands are threatened by overexploitation and the demand for the oil is much greater than the supply. Domestication programs, aiming at introducing the trees to small holder agroforestry systems, have been started for some of the species. The main aim of this study was to investigate the soil requirements of Allanblackia stuhlmannii in terms of chemical and physical parameters, as revealed by the soil conditions in native stands. Another aim was to see if these varied along an altitudinal transect.

The aim of this essay was to study the nitrogen flow in two willowplantations, at different locations in the south of Sweden, that wereirrigated with sewage. The study was also performed to compare thedifferences in nitrogen flows between two years, 1998 and 1999. The studywas made in three parts. First, the denitrification activity was measuredusing the acetylen inhibition method. Second the nitrogen flow, as well asthe water- and heat flows, were modeled through the SOIL-SOILN-modelThird; the nitrogen flow was calculated to compare with the results fromthe model.The results from the measurements were then compared with the resultsfrom the SOILN-simulations to detect differences in the denitrificationrate.

Using biofuels from regeneration cuttings is becoming more common in Sweden. Ash from the combustion of biofuels contains many valuable nutrients and base cations. The Swedish Forest Agency recommends that ash should be recycled to clearings where biofuels have been removed, to avoid future impoverishment of Swedish woodlands. In Jämtland, in northern Sweden, a large quantity of biofuels are taken out from cuttings but ash recycling has not yet been tried. The aim of this thesis was to examine the conditions for ash recycling in Jämtland regarding to soil chemistry and heavy metal content in soil and biofuels.

Piled friction soil show a set-up which is increasing with the time after installation. The cost could be reduced if the set-up had been taken into account when designing but in Sweden it is very unusual to do that. Previous studies showed that set-up can vary between 25 % and 75 % during the first 90 days after pile installation. This showed that the effect of the phenomenon is difficult to predict. A study involving five projects have been carried out by specifying certain parameters like pile type, method for pile installation and test method for measure the bearing capacity in friction soils located in Sweden.

A field experiment was carried out in 2006 to investigate the effects of deep rotary cultivation on sugarbeet growth. The background to the experiment was a 2005 study showing potentially higher yield, higher cleanness and higher sugar content when primary tillage was carried out to 35 cm depth with a rotary cultivator. On four field sites in Skåne (L:a Isie, Ädelholm, Stävie and Vragerup), five different treatments were compared: mouldboard ploughing in the autumn to 20 cm; mouldboard ploughing in the autumn to 20 cm + rotary cultivation in the spring to 35 cm; rotary cultivation in the autumn to 35 cm; rotary cultivation in the spring to 35 cm; and mouldboard ploughing in the spring to 20 cm. The rotary cultivator used in the treatments is manufactured by a Dutch company, Imants. The implement cultivates the soil with spade tines fitted on arms that are mounted on a horizontal rotating PTO-driven axle. Beet plants were inspected and yield determined in the experiment, and three soil parameters were examined: penetration resistance, water infiltration and infiltration of blue dye. Root shape was also examined. The site at Stävie was not harvested due to poor beet establishment. At the other sites, the highest yield was found when the soil was rotary-cultivated in the autumn.

A titania-supported nickel catalyst was prepared and tested in methanation in order to evaluate its catalytic properties (activity, selectivity and specially, activity loss), and compare it with an alumina-supported nickel catalyst.The titania-supported catalyst did not only show higher stability than alumina, but also presented a different cause of deactivation, carbon formation. In addition, a kinetic model was obtained for the titania-supported catalyst, and a study of the effect of different operating conditions (temperature, composition and partial pressures of synthesis gas and water) on the deactivation rate and carbon formation of this catalyst was performed.

The most predominant method for forest harvesting in Sweden is the cut-to-length method based on two-machines, a harvester that fells trees and cut them in a predefined length, and a forwarder which transports logs to a landing area for further transport to a processing facility. New machine solutions have to be much gentler to the ground than today?s machines. To be able to develop a forestry machine that preserves the terrain requires a proper understanding of the interaction between tire and soil.The goal of the project is to contribute to the existing knowledge of forest machine tire-soil interaction and to develop a tire-soil model that enables dynamic simulations of forest machines operating in rough terrain. The modeling has especially been focused on the interaction between tires and soft ground.A comparison of theoretical data of different WES-based terrain interaction models and a comparison test data from a full scale field test is presented.

This literature study concerned the use and function of the radioactive isotope carbon-14, as a dating method of organic material, within the scientific field of physical geography. In this report it is presented the need of atmospheric calibration curves and the development of these as a necessity to translate carbon-14 years to calibrated calendar years. A number of common age-depth models that is used to give an approximation of an accumulation sequence and its related dates over the actual time period in different natural archives is presented and discussed. Different problems that commonly occur when age-depth models are utilized as for instance reservoir effects, contaminations or other age deviations are addressed and analyzed. The software CLAM in presented and discussed and was also used to produce age-depth models.

The environment has become an important part in people´s lives, and in today´s society stakeholders demands have increased upon companies when it comes to sustainability reports. How these sustainability reports are designed depends on whom it?s for, laws and regulations, and the companies own norms and values. The purpose of sustainability reports is to measure, monitor and compare a company´s enviromental impact. It?s not only about integrating economics, but also enviromental and social standards together to get both financial and competitive advantages.Sustainable Value method is a new model and is the first real method that can be used to evaluate a company´s resources, both financial, social and enviromental to a sustainable value.This model is used to compare the resource efficiency between companies.In this thesis, a documentary study with an experimental approach has been made.Sustainability reports from six selected companies (in the engineering and forestry sector) have been investigated with respect to their accounting for carbon dioxide, and an experiment using the method ?Sustainable Value Approach? was subsequently performed.

Eutrophication is an environmental problem that affects more than ten percent of Swedish lakes. Excess nutrients increase the growth of algae, and cause major problems in the ecosystem through oxygen-free bottoms, fish kills, and at worst dead bottoms. Agriculture accounts for 44% of human emissions of phosphorus to lakes and rivers. Leaching occurs of particle bound phosphorus and of dissolved phosphate. The amount of phosphate in the soil solution that may be leached is partly due to the prevailing pH in the soil solution. The purpose of this study was to investigate how the relationship between phosphate solubility and pH was affected by liming.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.